Manual.ly Logo

Plustek SmartOffice PS456U Plus Manual

1.0 · 2 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
bc56efa2b7442cbe11fe676408fea29708cb page 1
Quick Guide(English) Wegweiser(Deutsch) Guide rapide(Français)
Guida rapida
(Italiano)
P/NO.: 17-07-2A65L11-C
Refer to the online help to guide you through any questions you may
have while using this scanner.
You may also consult the complete “user’s guide”, which is automatically
installed on your computer with the scanner software.
Nähere Informationen zu Fragen, die bei der Benutzung dieser
Software auftauchen könnten, nden Sie in der Online - Hilfe.
Weitere Hinweise enthält auch das “Benutzerhandbuch”, welches
mit der Scanner-Software automatisch installiert wurde.
Reportez vous a l’ aide online pour trouver les réponses aux questions qui
peuvent se poser lors de l’utilisation du Logiciel de gestion des documents.
Vous pouvez également consulter le “guide de L’utilisateur”, qui est installe
automatiquement sur votre ordinateur avec le logiciel du scanner.
Fare rirmento alla guida in linea per eventuali chiarmenti.
E possibili inoltre consultare il “maunale dellútente”, installato
automaticamnete nel computer con ils software dello scanner.
Contenu de l’Emballage
1. Scanner
2. Câble USB
3. Transformateur
4. SUPPORT DU CHARGEMENT PAPIER
5. Guide rapide
6. DVD-ROM d’Installation
7. Feuille d’étalonnage
8. Linge doux de nettoyage
9. Structure de numérisation pour papier mélangé (Option)
* Le Structure de numérisation pour papier mélangé n’est pas inclus
dans tous modèles de scanner.
staller et Congurer le Scanner
Étape 1. Install the Paper Chute
1. Ouvrezlebacd’alimentationautomatiqueentirantsurlelevieret
préparezlesupportduchargementpapier.
2. Installezlesupportduchargementpapierenalignanteteninsérant
leslanguettesdusupportdechargementpapierdanslesrainures
duscanner.
3. Fermezleboîtierdel’ADFenlerepoussantverslebasjusqu’àce
qu’ilseremetteenplace.
Étape 2. Connecter le Scanner à Votre Ordinateur
1.
Branchez le transformateur au connecteur d’alimentation du scanner
.
2. Branchezl’adaptateurdecourantàuneprisedecourantalternatif.
3. BranchezlapartiecarréeducâbleUSBdansleportUSB
à
l’arrièreduscanner.
4. BranchezlapartierectangulaireducâbleUSBàunportdisponible
survotreordinateur.
5. SivouspensezconnectervotrescanneràunhubUSB,assurez-
vousquecehubUSBestconnectéàunportdevotreordinateur.
Ensuite,connectezlescannerauhubUSB.
6. BranchezlecâbleUSBàl’arrièreduhubUSBduscanner.
7. Branchezl’autreextrémitéducâbleUSBsurleportUSBd’unautre
scanner.
Étape 3. Installer le Logiciel
1. Allumez le scanner à l’aide de l’interrupteur situé à l’arrière de
scanner.
2. Si les composants USB de votre ordinateur fonctionnent
correctement,ils détecteront automatiquement le scanner lançant
ainsile«Assistantd’installationd’unpériphérique»oule«Ajoutde
nouveaumatériel».
Informations
Si votre ordinateur est éteint lorsque le scanner
est connecté, le message « Assistant d’installation
d’un périphérique » ne s’afchera pas jusqu’à ce
que l’ordinateur soit en marche et que Windows
démarre.
3. Pour Windows XP:
a.Insérez le DVD-ROM d’installation, inclus avec votre scanner,
dansvotrelecteurDVD-ROM.
b.Sélectionnez « Installer Le Logiciel Automatiquement
[Recommandé]»etcliquezsurleboutonSuivant.
c.CliquezsurleboutonSuivantlorsquelafenêtreapparaît.Ensuite,
veuillezpasseràl’etape7.
4. Pour Windows Vista:
a.Sélectionnez l’option «Recherchez et installez le pilote logiciel
[Recommandé]» (Locate and install driver software) lorsque la
boîte de dialogue «Nouveau matériel détecté» (Found New
Hardware)apparaît.
b.Cliquez sur le bouton Continuer quand la boite de dialogue
«Compteutilisateur»(UserAccountControl)s’ouvre.
c.Insérez le DVD d’installation dans votre lecteur de DVD-ROM
quandlesystèmevousdemande«Insérerledisquefournitavec
votre scanner USB» (Insert the disc that came with your USB
Scanner), et cliquez sur le bouton Suivant. Ensuite, veuillez
passeràl’etape8.
5. Pour Windows 7:
a.Insérez le DVD d’installation dans votre lecteur de DVD-ROM.
FermezlafenêtreExécution automatiquequis’afche.
b.Depuis le menu Démarrer, cliquez-droit sur Ordinateur et
sélectionnez Propriétés depuis le men déroulant. Cliquez sur
Gestionnaire de périphériquesdel’écransuivant.
c.Dans la fenêtre du Gestionnaire de périphériques, cliquez-
droit sur le scanner sous la rubrique Autres périphériques et
sélectionnez Mettre à jour le pilote logiciel depuis le menu
déroulant.CliquezsurRechercher un pilote sur mon ordinateur
danslafenêtrequiapparait,etcliquezsurleboutonParcourir.
d.DanslafenêtreRechercher un dossier,sélectionnezledossier
ouvotrelecteurdeDVD-ROMcontenantlepiloteduscanneret
cliquezsurleboutonOKpourreveniràl’écranprécédent.Cliquez
surleboutonSuivant.Ensuite,veuillezpasseràl’etape9.
6. Pour Windows 8 & Windows 10:
a.Insérez le DVD d’installation dans votre lecteur de DVD-ROM.
Cliquez sur la notication qui s’afche, cliquez ensuite sur
Exécuter install.exe dans la fenêtre contextuelle. Si vous
manquez la notication, veuillez éjecter puis réinsérer le DVD-
ROMConguration/Application.
b.CliquezsurleboutonOui siledialoguedeContrôle de compte
d’utilisateurs’afche.Ensuite,veuillezpasseràl’etape9.
7. Durant l’installation, il se peut que le message « Windows ne
peutpasvérierl’éditeurdupilotedecelogiciel»(Windowscan’t
verify the publisher of this driver software) s’afche. Ignorez ce
messageetcontinuezvotreinstallationsanscrainte:votrescanner
fonctionneranormalement.
8. Lorsquel’installationestterminée,cliquezsurleboutonTerminer
pourfermerlaboîtededialoguedel’AssistantAjout/Suppressionde
matériel.
9. Suivez les instructions qui apparaissent à l’écran pour installer tous
les logiciels nécessaires à votre nouveau scanner USB. Si la fenêtre
de l’assistant s’afche, cliquez sur Suivant, et cliquez Installer ce
pilote quand même de ce logiciel de toute façon’ dans la fenêtre de
ce logiciel de toute façon’ dans la fenêtre de Sécurité de Windows,
puis cliquez sur Terminer dans la fenêtre de l’assistant.
10.Une fois les logiciels installés, fermez toutes les applications
ouvertes, et cliquez sur le bouton Terminer pour relancer votre
ordinateur.
Attention
Sauvegader le DVD-ROM installation/
applicationaucasoùvousdevriezréinstaller
legestionnaireetlelogicielàl’avenir.
L’étalonnage du scanner
Étalonnez le scanner si des couleurs apparaissent là où du blanc devrait
être visible ou si les couleurs varient considérablement entre l’image de
prévisualisation et l’original. Vous pouvez ainsi régler et compenser les
variations qui peuvent affecter le composant optique avec le temps.
Vous trouverez ci-après les consignes à suivre pour étalonner le scanner :
1. La feuille de calibration identiée par une èche sur un bord de
chaquefaceestspéciquepourlacalibrationaveclechargeurADF.
2. Insérezlafeuilledecalibrationspécialedanslechargeur,uneèche
orientéeverslepanneaudeboutons.
3. Dans le menu Démarrer dans Windows, aller sur Tous les
programmes > Nom du Model de Votre Scanner,puiscliquezsur
Assistant d’étalonnage.
(Pour les utilisateurs de Windows 8.1: pointez le curseur de votre
souris dans le coin supérieur ou inférieur droit de votre écran pour
ouvrir la barre Icônes. Cliquez sur l’icône Démarrer, puis cliquez
sur la èche vers le bas située près du coin inférieur gauche de
l’écran. L’écran Applications s’afche. Déplacez votre curseur vers
le bord droit de l’écran pour naviguer vers la droite jusqu’à afcher
Nom du Model de Votre Scanner, puis cliquez sur Assistant
d’étalonnage.)
4. CliquezsurSuivantàpartirde«Assistantd’etalonnage»Unpop
ups’afcheracliquezalorssurÉtalonner maintenant….
5. CliquezsurDémarrerpourlancerleprocessusdecalibration.
6. Le scanner fait glisser la feuille d’étalonnage dans l’appareil qui
effectuel’étalonnage.Aprèslacalibration,cliquezsurOKetensuite
cliquezsurAnnuler.
Attention
• Veuillez insérer la feuille d’étalonnage
spécialefournieaveclescannerpourlancer
l’étalonnage. Vous pouvez également
insérerunefeuilleblanchedeformatLetter/
A4maisl’effetseramoinsbonqu’avecune
feuilled’étalonnagespéciale.
• Sauver la Feuille d’étalonnage au cas
où vous devriez calibrer le scanneur à
l’avenir.
Nettoyer l’ADF
1. Ouvrezleboîtierdel’ADFentirantsurlelevier.
2. Essuyerdélicatementlesendroitssuivantsavecunlingehumidié
avecdunettoyant.VeillezànePASrayerleursurface.
Nettoyer le Rouleau d’Alimentation:
Essuyez le Rouleau d’Alimentation d’un côté à l’autre puis faites-le
tourner.Répétezjusqu’àatteindrelapropretédelasurface.
Nettoyage du module du rouleau de friction:
Essuyez le module du rouleau de friction de haut en bas (suivre la
directionde la èche commesur l’image).Faites attention à ne pas
endommagerlesressortsdumoduledurouleaudefriction.
3. Attendezquelesendroitsnettoyésaienttotalementséché.
4. Fermezleboîtierdel’ADFenlerepoussantverslebasjusqu’àce
qu’ilseremetteenplace.
Dégager un Bourrage
Si un bourrage survient dans l’ADF, suivez les étapes suivantes:
1. Enlever tous les documents non coincés de l’ADF.
2. Ouvrir le boîtier de l’ADF en tirant le levier d’ouverture.
3. Délicatement mais fermement, tirez les documents bourrés hors de
l’ADF. Essayez d’éviter de froisser ou de déchirer les documents.
4. Fermez le boîtier de l’ADF en le poussant vers le bas jusqu’à ce qu’il
se clisse en place.
Connexion du Scanner
La première étape lorsque vous voulez résoudre des problèmes de
connexion avec votre scanner est de vérier les connections physiques.
L’icône
, située dans la barre de tâche Windows indique si le
logiciel du scanner est correctement lancé et si le scanner et l’ordinateur
communiquent entre eux.
Apparence Statut
Le programme à été lancé avec succès et le scanner
est connecté avec l’ordinateur, prêt à numériser.
Le scanner n’est pas connecté avec l’ordinateur.
Ou, le scanner n’est pas en position de marche. Ou,
le scanner se met en veille.
Aucun
Afchage
Vous avez choisi de terminer ce programme,
que le scanner soit connecté ou déconnecté de
l’ordinateur.
INDICATEUR à LED
Les voyants d’alimentation/mode d’économie d’énergie et alerte indique
les différents états du scanner.
Voyant
d’alerte
(LED)
Voyant
d’Alimentation
/ mode
d’économie
d’énergie (LED)
Statut
Arrêt Blanc
Le scanner est en marche, prêt à
numériser des images.
Arrêt Orange Le scanner se met en veille.
Rouge Blanc clignotant
Le bac d’alimentation
automatique est ouvert.
Rouge
clignotant
Blanc Bourrage papier.
Arrêt Arrêt
Le scanner est arrêté, soit parce
qu’il est sur arrêt, soit parce que le
cordon d’alimentation n’est pas relié.
Capteur à ultrason
Lorsque vous numérisez une pile de documents en utilisant le bac
d’alimentation automatique, le capteur à ultrason détecte les problèmes
de bourrage papier en analysant le chevauchement des feuilles de papier
(c’est à dire 2 pages ou plus collé ensemble). Quand cela est nécessaire
veuillez nettoyez soigneusement le capteur à ultrason avec un chiffon
sec.
Informations
Cette fonction est ou n’est pas disponible
suivant le modèle de scanner que vous avez
acheté.
Lieferumfang
1. Scanner
2. USB-Anschlusskabel
3. Netzteil
4. Papiereinführung
5. Wegweiser
6. Programm und Treiber DVD-ROM
7. Kalibrierungs-Blatt
8. Reinigungstuch
9. Einzugsrahmen für gemischte Vorlagen (Optional)
* Der Einzugsrahmen für gemischte Vorlagen gehört nicht bei allen
Modellen zum Lieferumfang.
Scanner installieren und einrichten
Schritt 1. Installieren des Papiereinführung
1. ÖffnenSiedenADF-DeckelindemSiedenHebelziehen,damitdie
Papiereinführungeinsatzbereitist.
2.
Bauen Sie die Papiereinführung ein, dazu müssen Sie die Laschen der
PapiereinführungindievorgesehenenLöcherdesScannerseinführen.
3. SchließenSiedenADF-DeckelindemSieIhnwiederherunterdrücken
biserzurückinseinenPlatzrastet.
Schritt 2. Den Scanner an Ihren Computer anschließen
1.
VerbindenSiedasNetzteilmitdemNetzanschlussamScanner .
2. Schließen Sie das andere Ende des Netzteil an eine Standard-
Wechselstromsteckdose.
3. SchließenSiedenrechteckiggeformtenSteckerdesmitgelieferten
USB-KabelsandenUSB-Anschluss
desScanner.
4. Verbinden Sie das rechteckige Ende des USB-Kabels mit einem
freienUSB-AnschlussanderRückseitedesComputers.
5. WennSiedenScanneraneineUSB-Konsoleanschließenmöchten,
achtenSiedarauf,dassdieKonsolemitdemComputerverbunden
ist.SchließenSiedanndenScannerandieUSB-Konsole.
6. Stecken Sie das rechteckigeEnde eines anderen USB-Kabels in
denUSB-HubaufderRückseitediesesScanners.
7. Stecken Sie das quadratische Ende des anderen USB-Kabels in
denUSB-AnschlusseinesanderenScanners.
Schritt 3. Software installieren
1. SchaltenSiedenScanneranseinerRückseiteein.
2. Wenn die USB-Komponenten Ihres Computers einwandfrei
funktionieren, wird der Scanner automatisch erkannt und der
AssistentzumHinzufügenneuerHardwaregestartet.
Hinweise
Wenn der Computer bei der Installation des
Scanners ausgeschaltet war, wird nach dem
nächsten Start von Windows die Meldung
„Hardware-Assistent“ angezeigt.
3. Unter Windows XP:
a.LegenSiediemitgelieferteDVD-ROMindasDVD-Laufwerkein.
b.Wählen Sie Automatische Softwareinstallation [Empfohlen]
undklickenSieaufWeiter.
c.Klicken Sie im folgenden Fenster auf die Schaltäche Weiter.
FahrenSieanschließendmitschritt7fort.
4. Unter Windows Vista:
a.
WählenSiedieOption“Softwareautomatischinstallieren[EMPFOHLEN]”
(Locateandinstalldriversoftware),sobalddasDialogfelddes“Neues
Gerätgefunden”(FoundNewHardware)erscheint.
b.Klicken Sie auf Weiter, wenn sich das “Benutzerkonto” (User
AccountControl)Dialogfensteröffnet.
c.LegenSiediemitgelieferteDVD-ROMindasDVD-Laufwerkein,
wenn das Fenster erscheint: “Legen Sie die DVD ein, die mit
Ihrem USB Scanner geliefert wurde” (Insert the disc that came
withyourUSBScanner),undklickenSieaufWeiter.FahrenSie
anschließendmitschritt8fort.
5. Unter Windows 7:
a.LegenSiediemitihremScannermitgelieferte Setup-DVD-ROM
in das DVD-ROM-Laufwerk ein. Klicken Sie im Automatische
WiedergabeFensterauf install.exe ausführen.
b.Klicken Sie auf die Schaltäche Ja falls der Dialog
Benutzerkontensteuerung auftauchen sollte. Folgen Sie den
InstallationsanweisungenderPop-upNachricht.
c.Klicken Sie im Geräte-Manager Fenster unter Andere Geräte
mit der rechten Maustaste auf den Scanner und wählen Sie
Treibersoftware aktualisieren aus dem Pop-up Menü. Klicken
SieindemerscheinendenFensteraufAuf dem Computer nach
Treibersoftware suchen und klicken Sie die Durchsuchen
Schaltäche.
d.WählenSieimFensterOrdner suchen denOrdneroderdasDVD-
ROM-Laufwerk,derdenScannertreiberenthältundklickenSiedie
OKSchaltächeumzumvorherigenBildschirmzurückzukehren.
KlickenSie dieWeiterSchaltächeund Diese Treibersoftware
trotzdem installieren falls das Fenster Windows-Sicherheit
auftauchensollte.FahrenSieanschließendmitschritt9fort.
6. Unter Windows 8 & Windows 10:
a.LegenSiediemitihremScannermitgelieferte Setup-DVD-ROM
in das DVD-ROM-Laufwerk ein. Klicken Sie auf die Pop-up-
Benachrichtigung und im anschließenden Pop-up-Fenster auf
Install.exe ausführen. Wenn Sie die Pop-up-Benachrichtigung
verpassen,werfenSiebittedieProgramm-undTreiber-DVD-ROM
ausundwiederein.
b.Klicken Sie auf die Schaltäche Ja falls der Dialog
Benutzerkontensteuerung auftauchen sollte. Fahren Sie
anschließendmitSchritt9fort.
7. WährenddesInstallationsprozesseswirddie Meldung “Windows
kann den Herausgeber dieser Treibersoftware nicht überprüfen“
(Windows can’t verify the publisher of this driver software)
angezeigt.IgnorierenSiesie,undklickenSieaufTreibersoftware
dennoch installieren(Installthisdriversoftwareanyway),ummit
derInstallationfortzufahren.DiekorrekteScannerfunktionistdabei
dennochgesichert.
8. KlickenSienachAbschlussderInstallationauf Fertig stellen,um
denHardwareassistentenzuschließen.
9.
Folgen Sie zum Installieren der benötigten Software für lhren neuen
USB-Scanner den Anweisungen am Bildschirm. Sollte der Pop-
up Assistent auftauchen, klicken Sie auf Weiter und klicken Sie im
Fenster Windows-Sicherheit auf Diese Treibersoftware trotzdem
installieren.KlickenSiedannimPop-upAssistentenaufFertig stellen.
10.Schließen Sie nach Installation der Software alle offenen
AnwendungenundklickenSieaufdieSchaltäche Fertig stellen,
umlhrenComputerjetztneuzustarten.
Achtung
Bewahren Sie die Programm und Treiber DVD-
RomfürdenFallauf,dassSieerneutdenTreiber
unddieSoftwareinstallierenmüssen.
Kalibrierung des Scanners
Eine Kalibrierung des Scanners ist erforderlich, wenn weiße Flächen in
der Voransicht farbig sind, oder die Farbdarstellung von den Farben des
Originals stark abweicht. Durch das Kalibrieren können Abweichungen
und Messfehler, die bei allen optischen Geräten nach einiger Zeit
auftreten, nachjustiert und kompensiert werden.
Im Folgenden wird die Kalibrierung des Scanners beschrieben:
1. DasKalibrierungsblatt,welchesanbeidenKantenmitPfeilenmarkiert
ist,wirdspeziellzurKalibrierungdesdenPapiereinzugbenötigt.
2. LegenSiedasspezielleKalibrierungsblattindenPapiereinzugmit
demPfeilinRichtungdesBedienfeldesdesScanners.
3. Die Kalibrierungsassistent nden Sie unter Windows START
Menü>Alle Programme>DemOrdnerIhresScanners,unddort
klickenSiebitteaufKalibrierungsassistent.
(Für Windows 8.1 Benutzer: Bewegen Sie Ihren Mauszeiger in die
obere oder untere rechte Ecke Ihres Bildschirms um die Charm-
Leiste zu öffnen. Klicken Sie auf das Start Charm, und klicken Sie
dann auf die [Pfeil nach unten] Schaltäche in der linken unteren Ecke
des Bildschirms. Der Apps Bildschirm wird angezeigt. Bewegen Sie
Ihren Mauszeiger an den rechten Rand des Bildschirms um nach
rechts zu scrollen bis Sie den Ordner Ihres Scanners nden, und
klicken Sie dann auf Kalibrierungsassistent.)
4. KlickenSie Weiterim„Kalibrierungsassistent”der sich öffnetund
anschließendklickenSieJetzt Kalibrieren....
5. KlickenSieaufdenStartKnopfumdenKalibrierungsprozesszustarten.
6. Das Kalibrierungsblatt wird eingezogen und nach Durchlauf
wieder ausgegeben. Damit ist die Kalibrierung des Scanners
abgeschlossen.NachdemdieKalibrierungbeendetist,klickenSie
OKundanschließendAbbrechen.
Achtung
• LegenSiedieKalibrierungsvorlageein,diedem
Scannerbeiliegt,umdenKalibrierungsvorgang
zu starten. Sie können stattdessen auch ein
weißes DIN-Letter/A4-Blatt benutzen; die
Ergebnisse der Kalibrierung fallen mit der
Originalvorlagejedochbesseraus.
• Bewahren Sie das Kalibrierungsblatt für
den Fall auf, dass Sie den Scanner erneut
kalibrierenmüssen.
Reinigung des ADF
1. ÖffnenSiedenADF-DeckelindemSiedenHebelziehen.
2. Wischen Sie sanft über die folgenden Flächen mit dem mit
Reinigungsüssigkeit (nur 95% Isopropyl Alkohol benutzen!)
befeuchteten Tuch. Seien Sie vorsichtig damit Sie NICHT die
Oberächenzerkratzen.
Reinigen Sie die Einzugs-Rolle:
Wischen Sie den Einzugsroller von der einen Seite zur anderen
Seite,und drehenSie ihndann.Wiederholen Siediesbis dieganze
Oberächegründlichgereinigtist.
Reinigung des Einzugsrollenmoduls:
Wischen Sie die Einzugsrolle immer von oben nach unten ab
(siehe Beispielbild). Achten Sie dabei darauf die Federn des
Einzugsrollenmodulsnichtzubeschädigen.
3. WartenSiebisdiegereinigtenFlächenrichtiggetrocknetsind.
4. SchließenSiedenADF-DeckelindemSieIhnwiederherunterdrücken
biserzurückinseinenPlatzrastet.
Clearing Paper Jams
Wenn ein Papierstau in dem ADF entsteht, führen Sie bitte die folgenden
Schritte aus:
1. Entnehmen Sie alle unangestauten Dokumente welche sich immer
noch im ADF benden. (Achtung unbedingt den Deckel dazu öffnen.)
2.
Öffnen Sie den ADF-Deckel indem Sie an dem Deckelöffnungshebel ziehen.
3. Ziehen Sie behutsam aber fest die sich angestauten Dokumente aus
dem ADF. Versuchen Sie die Dokumente nicht zu falten oder zu knittern.
4. Schließen Sie den ADF-Deckel indem Sie Ihn wieder herunterdrücken
bis er zurück in seinen Platz rastet.
Verbindung mit dem Scanner
Wenn Verbindungsprobleme auftreten sollten, überprüfen Sie zuerst alle
Kabelverbindungen. Das Symbol
in der Windows-Taskleiste zeigt
an, ob die Scanner-Software ordnungsgemäß gestartet wurde und der
Computer und der Scanner miteinander kommunizieren.
Anzeige Status
Die Software wurde erfolgreich gestartet. Der Scanner
ist mit dem Computer verbunden und einsatzbereit.
Es besteht keine Verbindung zwischen Computer und
Scanner oder die Stromzufuhr zum Scanner wurde
nicht eingeschaltet, oder der Scanner geht in den
Standby Modus.
Keine
Anzeige
Sie haben die Software beendet –- unabhängig
davon, ob der Scanner mit dem Computer verbunden
ist oder nicht.
LED Anzeige
Die Power/Energiespar LED und Warn-LED zeigen unterschiedliche
Scannerzustände .
Warn-LED
Lampe
Power /
Energiespar
LED Lampe
Status
Aus Weiss
Der Scanner ist eingeschaltet, bereit um
Bilder einzuscannen.
Aus Orange Der Scanner ist im Standby Modus.
Rot
Blinkendes
Weiss
Die ADF Abdeckung ist offen.
Blinkendes
Rot
Weiss Papierstau
Aus Aus
Der Scanner ist aus, entweder weil er
nicht eingeschaltet ist oder weil das
Stromkabel nicht richtig in die Netzteil-
Steckdose gesteckt wurde.
Ultraschall-Sensor
Wenn Sie einen Stapel Dokumente mit dem ADF scannen wollen,
erkennt der Ultraschall-Sensor Multifeeds durch das Überprüfen von
Papierüberlappungen (z. B. 2 oder mehr Seiten hängen zusammen, wenn
Sie durch den ADF eingeführt werden). Reinigen Sie den Ultraschall-
Sensor vorsichtig mit einem trockenen Tuch, wenn es notwendig ist.
Information
Ob diese Funktion verfügbar ist oder nicht, hängt
von Ihrem Scannermodell ab.
Box Contents
1. Scanner
2. USB Cable
3. AC Adapter
4. Paper Chute
5. Quick Guide
6. Setup/Application DVD-ROM
7. Calibration Sheet
8. Cleansing Cloth
9. Mix-Paper Scan Frame (Option)
* The mix-paper scan frame is not included in all scanner models.
Installation and Setup
Step 1. Install the Paper Chute
1. OpentheADFcoverbypullingthelever,andgetthepaperchute
ready.
2. Installthepaperchutebyaligningandinsertingthetabsofthepaper
chuteintotheirslotsonthescanner.
3. ClosetheADFcoverbypushingitbackdownuntilitsnapsbackinto
place.
Step 2. Connecting the Scanner to Your Computer
1. PlugtheACadapterintothescanner’spowerreceptor
.
2. Plug the other end of theAC adapter into a standardAC power
outlet.
3. PlugthesquareendoftheincludedUSBcabletotheUSBport
attherearofthescanner.
4. PlugtherectangularendoftheUSBcabletoanavailableUSBport
onyourcomputer.
5. IfyouplantoconnectyourscannertoaUSBhub,makesurethatthe
hubisconnectedtotheUSBportinyourcomputer.Next,connect
thescannertotheUSBhub.
6. PlugtherectangularendofanotherUSBcabletotheUSBhubatthe
rearofthisscanner.
7. PlugthesquareendofanotherUSBcabletotheUSBportofanother
scanner.
Step 3. Installing the Software
1. Switchonthescannerpowerfromtherearofthescanner.
2. IftheUSBcomponentsonyourcomputerarefunctioningcorrectly,
they will automatically detect the scanner causing the Add New
HardwareWizardorFoundNewHardwareWizardtobelaunched.
Information
If your computer is off when the scanner is
connected, the “Add New Hardware Wizard”
message will not be displayed until the computer is
on and Windows starts.
3. For Windows XP:
a.Insert the Setup/Application DVD-ROM, included with your
scanner,intoyourDVD-ROMdrive.
b.Select Install the software automatically recommended and
clicktheNextbutton.
c.Click the Next button in the window that appears. Afterwards,
pleaseskiptoprocedure7.
4. For Windows Vista:
a.Select“Locateandinstalldriversoftware(recommended)”when
the“FoundNewHardware”windowisdisplayed.
b.Clickon the Continue button when the “UserAccount Control”
dialogpopsup.
c.Insert the Setup/Application DVD-ROM, included with your
scanner,intoyourDVD-ROMdrivewhenthesystempromptsyou
“InsertthediscthatcamewithyourUSBScanner”,andclickonthe
Nextbutton.Afterwards,pleaseskiptoprocedure8.
5. For Windows 7:
a.Insert the Setup/Application DVD-ROM, included with your
scanner,intoyourDVD-ROMdrive.ClickRun install.exeinthe
AutoPlaywindow.
b.ClickontheYesbuttoniftheUser Account Controldialogpops
up.Followtheinstructionsinthepop-upinstallationmessage.
c.IntheDevice Managerwindow,rightclickonthisscannerunder
Other devicesitemandselectUpdate Driver Softwarefromthe
pop-upmenu.ClickBrowse my computer for driver softwarein
thewindowthatappears,andclicktheBrowsebutton.
d.IntheBrowse For Folderwindow,selectthefolderortheDVD-
ROM drive that contains this scanner driver and click the OK
button to return to the previous screen. Click the Next button
and click Install this driver software anyway if the Windows
Securitywindowappears.Afterwards,pleaseskiptoprocedure9.
6. For Windows 8 & Windows 10:
a.InserttheSetup/ApplicationDVD-ROM,includedwithyourscanner,
intoyourDVD-ROMdrive.Clickonthepop-upnotication,then
clickRun install.exeinthepop-upwindow.Ifyoumissthepop-up
notication,pleaseejectandre-inserttheSetup/ApplicationDVD-
ROM.
b.ClickontheYes buttoniftheUser Account Controldialogpops
up.Afterwards,pleaseskiptoprocedure9.
7. Duringthe processofthe installation,amessage“Windows can’t
verify the publisher of this driver software” might be prompted.
Pleaseignoreit,andclickonInstall this driver software anyway
tocontinue the installation withoutany misgivingat your scanner
functioning.
8. Whenthesystemcompletestheinstallation,clicktheFinishbutton.
9. Followtheon-screeninstructionstoinstallallsoftwarethatyournew
scannerrequires.Ifthepop-upwizardwindowappearsclickNext,
and click Install this driver software anyway in the Windows
Security windowthenclickFinish inthewizardwindow.
10.Afterthesoftwareisinstalled,closeallopenapplicationsandclick
theFinishbuttontorestartyourcomputer.
Attention
Save the Setup/Application DVD in case you need
to reinstall the driver and software in the future.
Calibrating the Scanner
Calibrate the scanner if colors appear in areas that should be white, or
colors of the scanned image and the original vary a lot. This allows you
to adjust and compensate for variations that can occur in the optical
component over time by its nature.
The following describes how to calibrate the scanner:
1. TheCalibrationSheet,markedwithanarrowoneitheredgeatboth
sides,isusedspeciallyforADF Scanningcalibration.
2. InsertthespecialcalibrationsheetintotheADFofthescanner,with
anarrowtowardthescannerbuttons.
3. Click Start > All Programs > Your scanner model name >
Calibration Wizard.
(For Windows 8.1 users: Point your mouse cursor to the upper or
lower right corner of your screen to open the Charm bar. Click on
the Start charm, then click on the downwards arrow button in the
lower left corner of the screen. The Apps screen will be shown.
Move your cursor to the right edge of the screen to scroll right until
you nd Your scanner model name, and then click on Calibration
Wizard.)
4. ClickNextfromtheCalibrationWizardthatpopsupandthenclick
Calibrate Now....
5. ClickontheStartbuttontobeginthecalibrationprocess.
6. Thescannerpullsthecalibrationsheetthroughthescanner,which
completesthisscannercalibration.Afterthecalibrationiscomplete,
clickOKandthenclickFinish.
Attention
• Please insert the special calibration sheet
included with the scanner. Alternatively you may
also use any plain white sheet of paper sized
in Letter / A4 instead; however, the calibration
effect may be less good than the special
calibration sheet.
• Save the Calibration Sheet in case you need to
calibrate the scanner in the future.
Cleaning the ADF
1. OpentheADFcoverbypullingthelever.
2. Gentlywipethefollowingareaswiththeclothdampenedwiththe
cleaner.BecarefulNOTtoscratchtheirsurfaces.
Clean Feed Roller:
WipetheFeedRollerfromsidetosideandthenrotateit.Repeatthis
untilitsentiresurfaceiscleaned.
Clean Friction Roller Module:
WipetheFrictionRollerModulefromtoptobottom(inthedirectionof
arrowshowninthepicture).Becarefulnottodamagethespringofthe
FrictionRollerModule.
3. Waitforcleanedareastodrycompletely.
4. ClosetheADFcoverbypushingitbackdownuntilitsnapsbackinto
place.
Clearing Paper Jams
IfapaperjamintheADFhappens,pleaseperformthefollowingsteps:
1. RemoveanyunjammeddocumentsstillloadedintotheADF.
2. OpentheADFcoverbypullingthecoveropenlever.
3. GentlybutrmlypullthejammeddocumentsoutoftheADF.Tryto
avoidcreasingorwrinklingthedocuments.
4. ClosetheADFcoverbypushingitbackdownuntilitsnapsbackinto
place.
Scanner Connection
The rst step to take when troubleshooting connection problems with your
scanner is to check all physical connections. The icon
, located on the
Windows system tray, indicates if the scanner software is properly launched
and the scanner and computer are communicating with each other.
Appearance
Status
The program has been successfully launched and
the scanner is connected with the computer, ready
to scan images.
The scanner is not connected with the computer.
Or, the scanner power is not switched on. Or, the
scanner is in standby mode.
No Display
You have chosen to terminate the program, no
matter the scanner is connected or disconnected
with the computer.
LED Indicator
The Power/Power Saving LED and Warning LED indicate different
scanner status.
Warning
LED
Light
Power /
Power Saving
LED Light
Status
Off White
The scanner is turned on, ready
to scan images.
Off Orange The scanner is in standby mode.
Red Blinking White The ADF cover is opened.
Blinking
Red
White Paper jam.
Off Off
The scanner is off, either
because the power is not turned
on, or because the AC adapter
is not properly plugged into an
AC power outlet.
Ultrasonic Sensor
When scanning a stack of documents by ADF, the ultrasonic sensor
detects multifeeds by checking paper overlap (i.e., 2 or more pages stuck
together when being fed through the ADF). Clean the ultrasonic sensor
lightly with a dry cloth if it is necessary.
Information
This function may or may not be available
depending on the scanner model you purchase.
Guía Rápida(Español)
Si tiene alguna duda sobre el uso del Software de adminstarcion de
documentos, consulte la ayuda en linea.
Tambien puedo encontrar otras ayudas en el “manual del usuario”, instalado
automaticamente en su computadora con el Software der escaner.
Contenuto della confezione
1. Scanner
2. Cavo USB
3. Adattatore di rete AC
4. Scivolo carta
5. Guida rapida
6. DVD-ROM setup/applicazioni
7. Foglio di taratura
8. Panno detergente
9. Supporto per fogli misti (Opzionale)
* Il supporto per fogli misti non è incluso in tutti i modelli di scanner.
Installazione e congurazione
Fase 1. Istallazione dello scivolo per la carta
1. Aprire il coperchio dell’ADF premendo sulla leva, e preparare lo
scivolo.
2. Installareloscivoloperlacartaallineandoeinserendolelinguette
dellostessonellescanalaturedelloscanner.
3. Chiudereilportellodell’ADF,premerenchénonsiavverteunclic.
Fase 2. Collegare lo scanner al computer
1. Collegareiltrasformatoreallapresaelettricadelloscanner.
2. Inserire l’altra estremità dell’adattatore CA in una presa di rete
standardCA.
3. Collegarel’estremitàquadratadelcavoUSBinclusoallaportaUSB
sulretrodelloscanner.
4. Connetterel‘estremitàrettangolaredelcavoUSBallaportaUSBsul
retrodelcomputer.
5. SesièdecisodiconnettereloscanneraunhubUSB,accertarsiche
questosiaconnessoallaportaUSBdelpropriocomputer.Quindi
connettereloscannerall‘hubUSB.
6. Inserirel’estremitàrettangolarediunaltrocavoUSBall’hubUSBsul
retrodelloscanner.
7. Inserirel’estremitàquadratadiunaltrocavoUSBallaportaUSBdi
unaltroscanner.
Fase 3. Installazione del software
1. Accendereloscannerutilizzandol’interruttorenellaparteposteriore.
2. Se i componenti USB del computer funzionano correttamente,
rileveranno automaticamente lo scanner. Si aprirà la
nestra“Installazioneguidatanuovohardware”.
Informazioni
Se il computer era spento quando è stato effettuato il
collegamento dello scanner, il seguente messaggio
apparirà quando si accenderà il computer e si
avvierà Windows.
3. Per Windows XP:
a.InserireilDVDdiinstallazionefornitonell’appositaunità.
b.Selezionare [Installa Il Software Automaticamente (Scelta
Consigliata]]efareclicsulpulsante[Avanti].
c.Nellanestravisualizzatafareclicsulpulsante[Avanti].Inseguito
andarealpassaggio7.
4. Per Windows Vista:
a.Selezionare “Ricerca e installa il software driver. [Scelta
Consigliata]” (Locate and install driver software), quando è
visualizzata la nestra “Trovato nuovo hardware” (Found New
Hardware).
b.Fare clic su "Continua" quando appare la nestra di dialogo
“Controlloaccountutente”(UserAccountControl).
c.Inserireil DVD di installazione fornito in dotazione allo scanner
nell'unitàDVD-ROMquandoilsistemasuggerisce“Inserireildisco
fornitoindotazionealloScannerUSB”(Insertthediscthatcame
withyourUSBScanner),efareclicsulpulsante[Avanti].Inseguito
andarealpassaggio8.
5. Per Windows 7:
a.InserireilDVDdiinstallazionefornitonell’appositaunità.Chiudere
lanestra[AutoPlay]chevienevisualizzata.
b.Dalmenu[Fareclicperiniziare]diWindows,fareclicconiltasto
destrosu[Computer]eselezionare[Proprietà]dalmenupop-up.
Fareclicsu[Gestionedispositivi]nellaschermataseguente.
c.Nellanestra[Gestionedispositivi],fareclicconiltastodestrosu
questoscannerin[Altridispositivi]eselezionare[Aggiornamento
softwaredriver]dalmenupop-up.Fareclicsu[Cercailsoftware
deldrivernelcomputer]nellanestravisualizzata,efareclicsul
pulsante[Sfoglia].
d.Nellanestra[Cercacartella],selezionarelacartellaounitàDVD-
ROMchecontieneildriverdelloscannerefareclicsulpulsante
[OK]pertornareallaschermataprecedente.Fareclicsulpulsante
[Avanti].Inseguitoandarealpassaggio9.
6. Per Windows 8 & Windows 10:
a.InserireilDVDdiinstallazionefornitonell’appositaunità.Fareclic
sullanotica,quindifareclicsuEsegui install.exenellanestraa
comparsa.Sesiperdelanotica,estrarreereinserireilDVD-ROM
Setup/Application.
b.Fareclic sulpulsanteSi buttonsevienevisualizzatalanestra
di dialogo Controllo dell’account utente. In seguito andare al
passaggio9.
7. Nel corso dell’installazione può essere visualizzato il messaggio
”Richiesta autorizzazione logo di Windows “Windows non è in
gradodivericarel’autorediquestosoftwaredriver“(Windowscan’t
verifythe publisher of this driver software).Ignorareilmessaggio
efareclicsu[Installaquestosoftwaredriverinognicaso](Install
this driver software anyway) per continuare l’installazione senza
compromettereilfunzionamentodelloscanner.
8. Alterminedell’installazionefareclicsulpulsante[Fine]perchiudere
lanestra“Installazioneguidatanuovohardware”.
9. Seguire le istruzioni sullo schermo per installare tutto il software
necessarioalloscannerUSB.Sevienevisualizzatalanestraconla
proceduraguidata,fareclicsuAvanti,equindifareclicsuInstalla
il software del drivernellanestraSicurezza di Windowsequindi
fareclicsuFine nellanestradellaproceduraguidata.
10.Quandoilsoftwareèinstallato,chiuderetutteleapplicazioniaperte
efareclicsulpulsante[Fine]perriavviareilcomputer.
Attenzione
Conservare il DVD-ROM Congurazione /
Applicazionequalorafossenecessarioreinstallare
ildrivereilsoftwareinfuturo.
Regolare lo scanner
Regolare lo scanner se i colori in zone che dovrebbero restare bianche
o se i colori delle immagini scannerizzate e gli originali differiscono
parecchio. Questo permette di regolare e compensare le differenze che
possono avvenire nel tempo nelle componenti ottiche.
Le righe seguenti descrivono come regolare lo scanner:
1. Il foglio di regolazione viene usato specialmente per la regolazione di
scansione ADF.
2. Inserire lo speciale foglio di regolazione nell’Adf dello scanner.
3. Cliccare su Fare clic per iniziare > Tutti i Programmi > Nome del
vostro scanner > Calibrazione guidata.
(Utenti Windows 8.1: Puntare il cursore del mouse nell’angolo in alto o
in basso a destra dello schermo per aprire la barra Accessi. Fare clic
sull’icona Iniziare, quindi fare clic sulla freccia giù accanto all’angolo
in basso a sinistra della schermata. Sarà visualizzata la schermata
App. Spostare il cursore del mouse sul bordo destro dello schermo
per scorrere verso destra no a trovare il nome del modello dello
scanner, quindi fare clic su Calibrazione guidata.)
4. Cliccare su Avanti da Regolazione Wizard che appare e poi clicca su
Calibra ora....
5. Cliccare su Start per iniziare il processo di regolazione dell’ADF.
6. Lo scanner tira il foglio di regolazione nello lo scanner, che completa
la regolazione. Dopo che la regolazione è terminata, fare clic su OK e
quindi fare clic su Fine.
Attenzione
• Inserire nella fessura dello scanner, il foglio
speciale di calibratura, in dotazione allo
scanner. In alternativa, è possibile utilizzare
anche un normale foglio di carta bianca
formato Letter/A4: tuttavia, la qualità della
calibrazionepotrebbeessereinferioreaquella
ottenutautilizzandoilfogliospeciale.
• ConservareilFoglioperlacalibrazionequalora
fossenecessarioeseguirelacalibrazionedello
scannerinfuturo.
Pulire l’adf
1. Aprire il coperchio dell’ADF premendo sulla leva.
2. Pulire delicatamente i seguenti settori con il panno inumidito con il
detergente. Fare attenzione a NON grafare le superci.
Pulire il rullo di alimentazione:
Pulireilrullodialimentazionedaunlatoall’altroepoiruotarlo.Ripetere
questaoperazionenoaquandotuttalasupercieèpulita.
Pulizia del modulo Rullo Frizione:
Pulire il modulo Rullo Frizione dall’alto in basso (come mostrato
nell’illustrazionesullasinistra).Fareattenzioneanonrovinarelemolle
delmodulodelRullofrizione.
3. Attendere che le zone umide si asciughino completamente.
4. Chiudere il portello dell’ADF, premere nché non si avverte un clic.
Rimozione inceppamenti della carta
Se la carta si inceppa nell’ADF, seguire le seguenti istruzioni:
1. Rimuovere i documenti non inceppato che si trovano nell’Alimentatore
automatico di documenti (ADF).
2. Aprire l’ADF tirando il coperchio.
3. Estrarre delicatamente, ma con decisione, le pagine inceppate
dall’ADF. Cercare di evitare di rovinare o stropicciare i documenti.
4. Chiudere il portello dell’ADF, premere nché non si avverte un clic.
Connessione scanner
Il primo passo da fare quando ci sono problemi con la connessione dello
scanner è: controllare tutte le connessioni siche. L’icona
indica se
il programma dello scanner è lanciato correttamente e se lo scanner e il
computer comunicano tra loro.
Figure Stato
Il programma è stato lanciato correttamente e
lo scanner è connesso con il computer, tutto è
pronto per scannerizzare immagini.
Lo scanner non è connesso con il computer,
lo scanner è spento o lo scanner è in modalità
standby.
Niente
Si è scelto di chiudere il programma, non importa
se lo scanner è connesso o meno al computer.
Indicatore LED
Il LED alimentazione/risparmio energetico e il LED di avviso indicano i
differenti stati dello scanner.
LED di
avviso
LED alimentazione/
risparmio energetico
Stato
Spento Bianco
Lo scanner è acceso ed è pronto
a scansionare le immagini.
Spento Arancione
Lo scanner è in modalità
standby.
Rosso
Bianco
lampeggiante
Il coperchio dell’ADF è aperto.
Rosso
lampeggiante
Bianco Carta inceppata.
Spento Spento
Lo scanner è spento perché
non è stato acceso oppure
perché il trasformatore non è
correttamente inserito nella
presa elettrica.
Sensore ultrasonico
Quando si scansionano mucchi di documenti usando ADF, il sensore
ultrasonico rileva l’alimentazione multipla vericando la sovrapposizione
della carta (es. 2 o più pagine insieme inserite nell’ADF). Pulire
delicatamente il sensore ultrasonico con un panno asciutto, se necessario.
Informazioni
Questa funzione può essere disponibile
o meno in base al modello di scanner
acquistato.
Contenido del paquete
1. Escáner
2. Cable USB
3. Adaptador AC
4. Bandeja para papel
5. Guía rápida
6. DVD-ROM de instalación
7. Hoja de calibración
8. Paño de limpieza
9. Alimentador de papel multi-formato (Opción)
* El alimentador de papel multi-formato no está incluido en todos los
modelos.
Instalación y conguración
Paso 1. Instalación de la bandeja para papel
1. AbralacarcasadelADFempujandolapalanca,ypreparelabandeja
para papel.
2. Colóquelaalineandoeinsertandolaspestañasdelabandejapara
papelenlasranurasdelescáner.
3. CierrelacarcasadelADFempujándolahaciaabajohastaquese
cierrecorrectamenteensusitio.
Paso 2. Conexión del escáner al sistema
1. EnchufeeladaptadorACenelreceptordealimentacióndelescáner.
2. Enchufe el otro extremo del adaptador AC a una toma de
alimentaciónACestándar.
3. EnchufeelextremerectangulardelcableUSBsuministradoenel
puertoUSB
ubicadoenlaparteposteriordelescáner.
4. EnchufeelterminalrectangulardelcableUSBalreceptáculoUSB
situadoenlaparteposteriordelPC.
5. Si va a conectar el escánera un concentrador USB, compruebe
que el concentrador está correctamente conectado al PC. A
continuación,conecteelescáneralconcentradorUSB.
6. EnchufeelextremorectangulardeotrocableUSBalconcentrador
USBsituadoenlaparteposteriordeestescanner.
7. EnchufeelextremocuadradodeotrocableUSBalpuertoUSBde
otroescáner.
Paso 3. Instalación del software
1. Encender la energía del escáner a partir del lado trasero del
escáner.
2. Si los componentes USB instalados en su ordenador funcionan
correctamente, el escáner será detectado automáticamente y
aparecerá el cuadro de diálogo »Asistente para agregar nuevo
hardware«.
Información
Si su ordenador se encuentra desconectado
mientras el escáner está conectado, el mensaje
“Instale el nuevo Hardware Wizard” no aparecerá
hasta que conecte el ordenador e inicie Windows.
3. Para Windows XP:
a.Inserte el DVD de instalación suministrado en la unidad
correspondiente.
b.Seleccione“InstalarElSoftwareAutomáticamente[Recomendado]”
yhagaclicenelbotón[Siguiente].
c.Pulseelbotón[Siguiente]enlaventanaqueaparece.Después,
continúeconelpaso7.
4. Para Windows Vista:
a.Seleccione “Localizar e Instalar software del driver [Se
recomienda]” (Locate and install driver software) cuando se
visualizalaventana“NuevoHardwareEncontrado”(FoundNew
Hardware).
b.Pulseelbotón[Continuar]cuandoapareceelcuadrodediálogo
“ControldeCuentadeUsuario”(UserAccountControl).
c.
Inserte el DVD de instalación suministrado en la unidad
correspondiente cuando el sistema le pida “Insertar el disco que
vieneconelEscánerUSB”(InsertthediscthatcamewithyourUSB
Scanner),yhagaclicen[Siguiente].Después,continúeconelpaso8.
5. Para Windows 7:
a.Inserte el DVD de instalación suministrado en la unidad
correspondiente.Cierrelaventanade[Reproducciónautomática]
queaparezca.
b.Enlaventanadelmenú[Iniciar],hagaclicconelbotónderecho
en[Equipo]yseleccione[Propiedades]enelmenúdesplegable.
Haga clic en [Administrador de dispositivos] en la siguiente
pantalla.
c.En la ventana [Administrador de dispositivos], haga clic con el
botónderechoenesteescánerqueestáen[Otrosdispositivos]
y seleccione [Actualizar software de controlador] del menú
desplegable. Haga clic en [Buscar software de controlador en
el equipo] en la ventana que aparezca y haga clic en el botón
[Examinar].
d.Enlaventana[Buscarcarpeta],seleccionelacarpetaolaunidad
deDVD-ROMquecontengaelcontroladordeesteescáneryhaga
clicenelbotón[Aceptar]paravolveralapantallaanterior.Haga
clicenelbotón[Siguiente].Después,continúeconelpaso9.
6. Para Windows 8 & Windows 10:
a.Inserte el DVD de instalación suministrado en la unidad
correspondiente.Hagaclicenlanoticaciónemergente,entonces
hagaclcenEjecutar install.exeenlaventanaemergente.Sise
pierdelanoticaciónemergente,porfavoreyectaryreinsertarel
DVD-ROMdeSetup/Aplicación.
b.Haga clic en el botón Si si aparece el diálogo del Control de
cuentas de usuario.Después,continúeconelpaso9.
7. Durante el proceso de instalación, puede aparecer uno de los
siguientes mensajes: »Windows no puede vericar el proveedor
de este controlador« (Windows can’t verify the publisher of this
driversoftware).Nolotengaencuentayhagaclicen[Instalareste
controlador de todos modos] (Install this driver software anyway)
paraseguirconlainstalación.Estonotendráconsecuenciasenel
funcionamientodelescáner.
8. Cuando el sistema nalice la instalación, haga clic en el botón
[Finalizar] para cerrar el «Asistente para hardware nuevo
encontrado».
9. Siga las instrucciones de la pantalla para instalar el software
necesarioparaelescánerUSB.Siaparecelaventanadelasistenten,
haga clic en Siguiente, y haga clic en Instalar este software de
controlador de todas formas en la ventana de Seguridad de
WindowsyluegohagaclicenFinalizar enlaventanadelasistente.
10.Cuandoestéinstaladoelsoftware,cierretodaslasaplicacionesy
hagaclicenelbotón[Finalizar]parareiniciar.
Atención
GuardeelDVD-ROMdeInstalación/Aplicación
para futuras reinstalaciones de controlador y
softwarecuandoseanecesario.
Calibración del escáner
Deberácalibrarelescánersiaparecencoloresenzonasquedeberían
serblancasosiloscoloresdelaimagenescaneadavaríanmuchodel
original.Estaopciónlepermitiráajustarycompensarlasvariaciones
quepuedan ocurrir enelcomponenteóptico con elpasodel tiempo
pornaturaleza.
Acontinuaciónsedescribecómocalibrarelescáner:
1. SeutilizaespecialmentelaHojadecalibraciónparacalibrarlazona
deescánerADF.
2. IntroduzcalahojaespecialdecalibraciónenelalimentadorADFdel
escáner.
3. HagaclicenIniciar > Todos los Programas > Nombre del modelo
de su escáner > Asistente de Calibración.
(Para usuarios de Windows 8.1: Apunte el cursor sobre la esquina
superior o inferior derecha de su monitor para abrir la barra
Accesos. Haga clic en Iniciar, luego haga clic en la echa hacia
abajo en la parte inferior izquierda del monitor. La ventana de
Aplicaciones será mostrada. Mueva el cursor al borde derecho del
monitor para desplazar hasta que encuentre El Nombre de Modelo
de su Escáner, entonces haga clic en Asistente de Calibración.)
4. HagaclicenSiguienteenelAsistentedecalibraciónqueaparezca
yhagaclicenCalibrar Ahora....
5. HagaclicenelbotónIniciarparainiciarelprocesodecalibración
delADF.
6. El escáner expulsará la hoja de calibración y se completará la
calibracióndeldispositivo.Cuando lacalibraciónhayaterminado,
hagaclicenFinalizar.
Atención
• Introduzca la hoja de calibración especial
suministrada con el escáner para iniciar
la calibración. También puede utilizar un
folio blanco normal de tamaño Letter/A4.
No obstante, puede que el resultado de la
calibracióntengapeorcalidadqueconlahoja
especial.
• Guarde la Hoja de Calibración para futuras
calibraciones del escáner cuando sea
necesario.
Limpieza del ADF
1. AbralacarcasadelADFempujandolapalanca.
2. Limpieconcuidadolassiguienteszonasconelpañohumedecido
con el producto de limpieza. Tenga cuidado para no arañar la
supercie.
Limpieza del rodillo de alimentación:
Limpie el rodillo de alimentación de lado a lado y rotándolo poco a
poco.Repitaestaoperaciónhastaquetodalasuperciequedelimpia.
Limpiar módulo de rodillo de caucho a fricción:
Frotarelmóduloderodilloafriccióndearribahaciaabajo(enladirección
delaechaenelgráco).Atencióndenodañarelamortiguadordel
módulodelrodillo.
3. Espereaquelaszonaslimpiadassesequencompletamente.
4. CierrelacarcasadelADFempujándolahaciaabajohastaquese
cierrecorrectamenteensusitio.
Eliminar atascos de papel
Si un documento se queda atascado en el ADF, siga los siguientes pasos:
1. Extraiga los documentos que no se hayan atascado y que estén en el
ADF.
2. Abra la carcasa del ADF empujando la carcasa.
3. Extraiga con cuidado pero con rmeza los documentos atascados en
el ADF. Intente evitar que los documentos se doblen o se arruguen.
4. Cierre la carcasa del ADF empujándola hacia abajo hasta que se
cierre correctamente en su sitio.
Conexión del escáner
El primer paso que debe realizar cuando se enfrente a problemas de
conexión de su escáner será comprobar todas las conexiones físicas. El
icono
, ubicado en la bandeja de sistema de Windows, indica si el
software del escáner se ha ejecutado apropiadamente y si el escáner y
el ordenador están en comunicación correctamente.
Apariencia Estado
Se ha ejecutado el programa correctamente y el
escáner está conectado al ordenador. El escáner
está listo para escanear imágenes.
El escáner no está conectado al ordenador, o
el escáner no está encendido. O el escáner se
encuentra en modo de espera.
No se
muestra
Ha seleccionado nalizar el programa, sin tener
en cuenta si el escáner estaba conectado o
desconectado del ordenador.
Indicadores LED
Los indicadores de encendido/ahorro de energía y el de advertencia
indican diferentes estados del escáner.
Indicador LED
de advertencia
Indicador LED
de encendido/
ahorro de
energía
Estado
Apagado Blanco
El escáner está encendido y preparado
para escanear imágenes.
Apagado Naranja
El escáner se encuentra en modo
de espera.
Rojo
Parpadea en
blanco
La carcasa del ADF está abierta.
Parpadea en rojo
Blanco Atasco de papel.
Apagado Apagado
El escáner está apagado, bien porque
la alimentación no está activa o porque
el adaptador de CA no está bien
conectado a la toma de corriente CA.
Sensor Ultrasónico
Cuando el ADF escanea una gran cantidad de documentos, el sensor
ultrasónico detecta alimentaciones múltiples comprobando la sobrecarga
de papel (es decir, 2 o más hojas que se amontonan al introducirlas en
el ADF). Limpie el sensor ultrasónico suavemente con un paño seco si
es necesario.
Información
Puede que esta función no esté disponible
según el modelo de escáner que haya adquirido.

Chat with your Plustek SmartOffice PS456U Plus manual using AI

Get instant AI answers from your Plustek SmartOffice PS456U Plus manual

Ask anything about the Plustek SmartOffice PS456U Plus. Answers come from this manual, with the pages they are based on.

SmartOffice PS456U Plus Maintenance Schedule

As needed
Clean the ADF feed roller and friction module

Wipe the feed roller side-to-side and rotate it. Wipe the friction roller module top-to-bottom using a cloth dampened with cleaner.

As needed
Calibrate the scanner

Run the calibration wizard if colors appear in white areas or vary significantly from the original. Use the included calibration sheet.

As needed
Clean the ultrasonic sensor

If multifeed detection issues occur, clean the ultrasonic sensor lightly with a dry cloth.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SmartOffice PS456U Plus?

Yes No
0
User Pic

BlanditiisRepudiandae30

8 months ago

Is this scanner reliable for daily use? I read about repeated feeder failures and support system complaints. How is the current warranty and ticket process handled?

0
User Pic

Manual.ly

8 months ago

We apologize for the inconvenience noted in recent reviews. Our devices are tested rigorously, but we continuously update support workflows. Please contact our support team with your specific hardware error logs to initiate a priority case. We aim to resolve hardware issues without repeated ticket closures so please reference any previous case numbers.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Klaus Weber

7 months ago

Is this scanner reliable long-term and why does support close tickets after 48 hours?

0
User Pic

Manual.ly

7 months ago

We appreciate your feedback. While our devices meet strict quality standards, individual units are sent for replacement if needed. Regarding support, the 48-hour cycle manages high volume. We are currently testing a form update to allow multiple file uploads per ticket for easier issue tracking. Please contact us directly with your serial number.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

Use the USB cable and connect the power adapter to a wall outlet. Turn on the switch on the back of the unit and wait for the LED indicator to show green.

Is this answer helpful?

A

Minimum size is two inches by two inches. Maximum width fits up to eight and a half inches with length up to two hundred inches.

Is this answer helpful?

A

Yes, the unit supports business cards. Load up to thirty cards at a time with proper width guide adjustment for optimal alignment.

Is this answer helpful?

A

Clean the rollers and glass surface every month of regular heavy usage. Use isopropyl alcohol on a cloth to prevent dust buildup.

Is this answer helpful?

A

Yes, the Automatic Document Feeder supports two sided capture. This doubles throughput without manual flipping of items.

Is this answer helpful?

A

DocAction control software and OCR tools come on the DVD. It supports TWAIN standard drivers for broad application compatibility.

Is this answer helpful?

A

You can find details in the Appendix B section of the printed guide. Contact customer service for repairs or claims support.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High speed ADF scanning capability handles large volumes efficiently.
  • Ultrasound multifeed detection prevents errors during batch processing.
  • TWAIN compatibility ensures software integration with most applications.
  • User friendly control panel offers direct access to scan functions.
  • Durable build quality supports daily office operations and long term use.
VS

Disadvantages

  • Driver installation requires administrative privileges on the host system.
  • Roller replacement is needed periodically to maintain feed performance.
  • Plastic cards require careful handling to fit within maximum thickness limits.
  • Cleaning supplies must be alcohol based to avoid damaging components.
  • Power cable length may limit placement flexibility in some setups.
M: QW-35-FL

Product Specification

Type

Document Scanner (CCD)

Resolution

600x600dpi

Scan Speed

80/45 ppm (B/W/Color)

Paper/Film Format

A4

Paper/Film Input

100 sheets ADF, Duplex Unit

Connections

1x USB 2.0

Software

OCR Software

Dimensions

12.56x8.98x9.09 in

Weight

5.95 lbs

M: QW-35-FL

Product Description

Product Overview

The Plustek SmartOffice PS456U Plus Manual serves as a comprehensive resource for setting up this reliable hardware solution. Users often seek detailed guidance for installation and configuration. This machine is built for modern office environments where speed and quality matter most. The device connects via USB port allowing hot plug functionality without restarting the computer. This feature saves time and reduces frustration during initial setup processes. The automatic feeder accepts standard sheets up to one hundred items at a time.

Performance and Quality

Scanning quality is enhanced by optical resolution reaching six hundred dots per inch. Colors are captured accurately using thirty-two bit processing capabilities. Text recognition software converts printed content into searchable formats automatically. This reduces manual entry work for data processing tasks significantly. You can send results directly to email or save them locally on the hard drive. Maintenance is straightforward with clear instructions for routine care. Dust accumulates over time on the glass surface and rollers. Cleaning requires a soft cloth and isopropyl alcohol solution applied carefully.

Controls and Interface

Control buttons on the front panel allow quick access to power and scan functions. An LCD screen displays status messages and error codes for troubleshooting. Users can navigate menus using up and down directional keys easily. The standby mode saves energy when the device is not active. This ensures lower electricity bills and reduces heat output in the room. Compatibility with TWAIN drivers ensures integration with most image editing programs.

Versatility and Usage

The hardware is compact enough to fit on standard desks without clutter. Heavy duty construction protects internal components during transport or accidental bumps. Customers appreciate the support provided during warranty claims for defective units. Environmentally conscious designs feature recyclable packaging materials for disposal. Electronic waste regulations are followed for end of life management protocols. Safety standards prevent electric shock hazards during normal operation.

Technical Specifications

In addition to standard scanning, the unit supports duplex operations for double sided capture. This doubles the throughput for double sided records without manual flipping of sheets. The Ultraschall function detects when multiple items enter the chute simultaneously. This prevents jams and protects valuable sheets from being damaged during feeding. The software suite includes a utility for calibrating the sensors regularly.

Business card input requires specific adjustment of the width guides for alignment. The maximum thickness for plastic cards is one point two millimeters strictly. Anything thicker may cause mechanical failure of the drive mechanism inside. Paper weight options range from forty to two hundred twenty grams per square meter. This versatility accommodates everything from light stationery to heavy cardstock stock.

Troubleshooting sections address common issues like light errors or connectivity loss. Resetting the driver or checking cable connections often restores normal function. Customer support teams are available during business hours for urgent assistance. You can find contact details in the back of the included booklet included.

The LED indicators change color to show power states and warning alerts. Red light signals an immediate problem requiring user intervention to resolve. Green light indicates normal operation and readiness for the next batch. Orange light shows the device is in low power mode waiting to wake.

It balances speed with precision to deliver consistent results daily. Users will find it intuitive to operate after a brief learning curve. The investment pays off through increased efficiency and reduced waste over time.

M: QW-35-FL

© Copyright 2026 Manual.ly