Manual.ly Logo

PeakTech 4350 Manual

0.0 · 0 Ratings

PDF manual · 41 Pages

English

M: QW-35-FL
page

/ 41

Loading...
21530b0ad110912630a040e7e079db2949de page 4
* Messungen von Spannungen über 35 V DC oder 25 V AC nur
in Übereinstimmung mit den relevanten
Sicherheitsbestimmungen vornehmen. Bei höheren
Spannungen können besonders gefährliche Stromschläge
auftreten.
* Ersetzen Sie die Batterie, sobald das Batteriesymbol
aufleuchtet. Mangelnde Batterieleistung kann unpräzise Mess-
ergebnisse hervorrufen. Stromschläge und körperliche
Schäden können die Folge sein.
* Sollten Sie das Gerät für einen längeren Zeitraum nicht
benutzen, entnehmen Sie die Batterie aus dem Batteriefach.
* Säubern Sie das Gehäuse regelmäßig mit einem feuchten
Stofftuch und einem milden Reinigungsmittel. Benutzen Sie
keine ätzenden Scheuermittel.
* Dieses Gerät ist ausschließlich für Innenanwendungen
geeignet.
* Keine technischen Veränderungen am Gerät vornehmen.
* Vermeiden Sie jegliche Nähe zu explosiven und
entflammbaren Stoffen.
* Öffnen des Gerätes und Wartungs- und Reparaturarbeiten
dürfen nur von qualifizierten Service-Technikern durchgeführt
werden.
* Gerät nicht mit der Vorderseite auf die Werkbank oder
Arbeitsfläche legen, um Beschädigung der Bedienelemente zu
vermeiden.
* - Messgeräte gehören nicht in Kinderhände –
Reinigung des Gerätes:
Gerät nur mit einem feuchten, fusselfreien Tuch reinigen. Nur
handelsübliche Spülmittel verwenden.
Beim Reinigen unbedingt darauf achten, dass keine Flüssigkeit in
das Innere des Gerätes gelangt. Dies könnte zu einem
Kurzschluss und zur Zerstörung des Gerätes führen.
-3-

Chat with your PeakTech 4350 manual using AI

Get instant AI answers from your PeakTech 4350 manual

Ask anything about the PeakTech 4350. Answers come from this manual, with the pages they are based on.

4350 Maintenance Schedule

Remind me when maintenance is due
Yearly
Recalibrate the meter

The manufacturer recommends repeating the calibration of the unit after one year to maintain measurement accuracy.

Show in the manual (page 22)
When battery symbol appears
Replace the batteries

Replace the two AAA batteries as soon as the battery indicator appears on the display to ensure accurate readings and prevent damage.

Periodically
Clean the device housing

Wipe the cabinet with a damp, soft cloth and mild detergent. Do not use abrasives or solvents, and ensure no liquid enters the device.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 4350?

Yes No

Frequently Asked Questions

A

The PeakTech 4350 is rated for a maximum input voltage of 600 V AC/DC. Exceeding this limit poses a serious risk of injury or damage to the device. Always ensure your circuit is within these limits before connecting leads.

Is this answer helpful?

A

No, the device measures either AC or DC current at one time using the MODE button to switch between functions. You must select the appropriate setting before clamping the jaws around the conductor.

Is this answer helpful?

A

Turn off the meter and remove test leads. Unscrew the battery cover on the back, remove the old batteries, and insert two new 1.5V AAA batteries observing correct polarity. Secure the cover tightly before use.

Is this answer helpful?

A

Yes, the device features a backlight activated by holding the HOLD/Backlight button for two seconds. The light turns off automatically after approximately 20 seconds to conserve battery power.

Is this answer helpful?

A

No, the manual specifies that this device is exclusively for indoor applications. Exposure to rain, extreme humidity, or direct sunlight can damage the internal components and void safety certifications.

Is this answer helpful?

A

The REL button sets the current reading as a reference value. Subsequent measurements show the difference between the new reading and the stored reference, useful for detecting small changes in voltage or resistance.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS measurement capability for accurate AC readings on complex waveforms
  • Large 3 4/5-digit LCD display with analog bar graph for easy reading
  • High safety rating of CAT III 600V suitable for industrial applications
  • Includes built-in temperature measurement via K-type thermocouple
  • Auto-ranging and auto-power off features enhance convenience and battery life
VS

Disadvantages

  • Maximum DC current measurement limited to 5000 mA before switching to A range
  • Temperature probe not integrated into the main body but sold as separate accessory
  • Display resolution may be lower compared to high-end laboratory grade meters
  • Only suitable for indoor use due to environmental limitations
  • Requires two AAA batteries which must be replaced periodically
M: QW-35-FL

Product Specification

Measurement Range

max. 80A, max. 600V, max. 50MΩ

Package Contents

Bag, test leads

M: QW-35-FL

Product Description

PeakTech 4350 True RMS Multimeter: Precision in Your Hands

The PeakTech 4350 True RMS Multimeter stands as a robust tool for electricians and hobbyists seeking accurate measurements in complex environments. This digital clamp meter combines versatility with safety, designed to handle a wide array of electrical tasks ranging from simple voltage checks to intricate current analysis. Its True RMS technology ensures that AC voltage and current readings remain precise even when dealing with non-sinusoidal waveforms, providing reliable data where standard meters might fail.

Equipped with a large 3 4/5-digit LCD display featuring an analog bar graph, the device offers clear visibility of results under various lighting conditions. The backlight function activates with a long press of the hold button, aiding work in dimly lit panels or tight spaces. The transformer jaws allow for safe, non-intrusive current measurements up to 80 Amps, while the included thermocouple enables temperature monitoring across a broad range. Safety is paramount; the unit meets CAT III 600V standards, ensuring protection against high-energy transients common in industrial settings.

Beyond basic functionality, the PeakTech 4350 includes advanced features like MIN/MAX recording, relative mode for differential measurements, and continuity testing with audible feedback. Whether you are troubleshooting household appliances or inspecting industrial machinery, this multimeter delivers the consistency needed for professional-grade diagnostics. Its compact design and durable build make it an essential companion for any toolkit, promising years of dependable service.

M: QW-35-FL

© Copyright 2026 Manual.ly