Manual.ly Logo

PeakTech 3340 Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
5ba187c06888fae9e64303e07624986ccf64 page 1e
* Do not conduct voltage measurements with the test leads connected to
the mA/A- and COM-terminal of the equipment.
* The 10A-range is protected. To avoid damage or injury, use the meter
only in circuits limited by fuse or circuit breaker to 10A or 2000VA.
* To avoid electric shock, disconnect power to the unit under test and
discharge all capacitors before taking any resistance measurements.
* Do not conduct current measurements with the leads connected to the
V/Ω-terminals of the equipment.
* Check test leads and probes for faulty insulation or bare wires before
connection to the equipment.
* To avoid electric shock, do not operate this product in wet or damp
conditions. Conduct measuring works only in dry clothing and rubber
shoes, i. e. on isolating mats.
* Never touch the tips of the test leads or probe.
* Comply with the warning labels and other info on the equipment.
* Always start with the highest measuring range when measuring
unknown values.
* Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before taking up
measurement (important for exact measurements).
* Do not input values over the maximum range of each measurement to
avoid damages of the meter.
* Do not turn the rotary function switch during voltage or current
measurement, otherwise the meter could be damaged.
* Use caution when working with voltages above 35V DC or 25V AC.
These Voltages pose shock hazard.
* Replace the battery as soon as the battery indicator “BAT” appears.
With a low battery, the meter might produce false reading that can lead
to electric shock and personal injury.
* Fetch out the battery when the meter will not be used for long period.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do
not use abrasives or solvents.
* The meter is suitable for indoor use only
* Do not store the meter in a place of explosive, inflammable substances.
-29-

Chat with your PeakTech 3340 manual using AI

Get instant AI answers from your PeakTech 3340 manual

Ask anything about the PeakTech 3340. Answers come from this manual, with the pages they are based on.

3340 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the multimeter

The manual recommends repeating the factory calibration after 1 year to ensure continued accuracy of the device.

Show in the manual (page 28)
As needed
Clean the housing with a damp cloth

Periodically wipe the cabinet with a damp cloth and mild detergent. Do not use abrasives or solvents.

Show in the manual (page 30)
When low battery indicator appears
Replace the 9V battery

Replace the battery as soon as the 'BAT' symbol appears on the display to prevent inaccurate readings.

Show in the manual (page 30)
Before long storage
Remove the battery from the device

If the meter will not be used for a long period, remove the battery to prevent damage from leakage.

Show in the manual (page 30)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 3340?

Yes No

Frequently Asked Questions

A

The device is designed to measure up to 600V DC or ACrms safely. Exceeding this limit poses a risk of serious injury or device destruction.

Is this answer helpful?

A

No, the clamp-on adapter is not included in the standard package. It must be purchased separately to measure currents up to 400A.

Is this answer helpful?

A

Turn off the meter, remove the back cover screws, and replace the blown fuse with one matching the original specifications: 500mA/600V or 10A/600V depending on the position.

Is this answer helpful?

A

Absolutely not. You must turn off power and discharge capacitors before measuring resistance to avoid damaging the meter or injuring yourself.

Is this answer helpful?

A

It requires a single 9V block battery, specifically NEDA 1604 or an equivalent model, to operate the internal electronics.

Is this answer helpful?

A

No, this device is intended for indoor applications only. Exposure to rain, extreme humidity, or direct sunlight can damage the unit.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust design suitable for demanding service environments
  • High safety rating with CAT III 600V overvoltage protection
  • Versatile measurement capabilities including temperature and capacitance
  • Clear 3 ¾ digit LCD with backlight and data hold function
  • Includes Type K thermocouple for temperature measurements
VS

Disadvantages

  • Clamp-on adapter for high current is not included in the package
  • Maximum current measurement without adapter limited to 10A
  • Frequency measurement sensitivity drops at higher ranges
  • Requires specific fuse replacements for maintenance repairs
  • Battery life may decrease if used frequently in cold temperatures
M: QW-35-FL

Product Specification

Measurement range

max. 10A, max. 600V, max. 40MΩ

Package contents

Case, test leads

M: QW-35-FL

Product Description

PeakTech 3340 Digital Multimeter Review

The PeakTech 3340 Digital Multimeter stands as a robust and versatile tool designed for technicians who demand reliability in their daily service work. This handheld device features a rugged casing that protects against the rigors of a busy workshop while delivering precise measurements across a wide array of electrical parameters. Its 3 ¾-digit LCD display offers clear visibility with a maximum count of 3999, ensuring that even small fluctuations are captured accurately.

Engineered for safety and efficiency, this multimeter adheres to strict EU standards for electromagnetic compatibility and low voltage. It is rated for Overvoltage Category III up to 600V, making it suitable for distribution-level measurements while maintaining user protection. The device includes essential features like automatic polarity switching, overload protection, and an audible buzzer for continuity checks. A dedicated backlight illuminates the screen in dim environments, while the data hold function allows users to freeze readings for easier analysis away from the circuit.

Beyond standard voltage and current measurements, the PeakTech 3340 supports resistance, capacitance, frequency, and temperature testing using a Type K thermocouple included in the package. For high-current applications up to 400A, it accommodates a clamp-on adapter (sold separately), expanding its utility significantly. The unit runs on a standard 9V battery and features an auto-power-off function to conserve energy after 15 minutes of inactivity. Whether diagnosing household appliances or industrial equipment, this multimeter provides the confidence needed for safe and accurate diagnostics.

Key Features

  • High-resolution 3999-count display
  • Comprehensive safety ratings for CAT III environments
  • Multiple measurement modes including diode test and battery check
  • Durable construction with a stand for hands-free operation

Important Notes

  • Always verify test leads for damage before use.
  • Do not exceed 600V input limits to prevent injury.
  • Remove batteries during long-term storage to avoid leakage.
M: QW-35-FL

© Copyright 2026 Manual.ly