Manual.ly Logo

PeakTech 1205 Manual

0.0 · 0 Ratings

PDF manual · 122 Pages

English

M: OA-GPT-5-NAN
page

/ 122

Loading...
4ebb2dac7b2a413e8e676f350297bd78d70c page 79
121
8.3. Storage of Oscilloscope
If the test tool is to be stored for a long time, it is required to charge the lithium battery before storage.
Charging the oscilloscope
The lithium battery is possibly not charged when delivery. To make the battery with enough electric quantity, it
must be charged for 4 hours (the test tool must be turned off during charging). The battery can supply power
for 4 hours after being charged completely.
When supplying power by using the battery, a battery indicator is displayed on the top of the screen to show
the consumption condition of electric quantity. The symbols that are possibly appear include , , and ,
where shows that the battery can only be used for about 5 minutes. To charge the battery and power the
instrument, connect the oscilloscope using a power adapter according to Figure 1 to charge the battery. The
charging speed can be increased by turning off the test tool.
Notice:
To avoid superheat of battery during charging, the environment temperature is not allowed to exceed the
permissible value given in technical specification.
Note:
No hazard will occur even connecting the charger for a long time, e.g. during a whole weekend. The
instrument can automatically switch to slowly charging status.
8.3.1. Replacing the Lithium Battery Unit
It is usually not required to replace the battery unit. But when it is required to replace it, only qualified
personnel can carry out this operation, and only use the same specification lithium battery.
8.4. Notification about the Battery Regulation
The delivery of many devices includes batteries, which for example serve to operate the remote control. There
also could be batteries or accumulators built into the device itself. In connection with the sale of these
batteries or accumulators, we are obliged under the Battery Regulations to notify our customers of the
following:
Please dispose of old batteries at a council collection point or return them to a local shop at no cost. The
disposal in domestic refuse is strictly forbidden according to the Battery Regulations. You can return used
batteries obtained from us at no charge at the address on the last side in this manual or by posting with
sufficient stamps.
Contaminated batteries shall be marked with a symbol consisting of a crossed-out refuse bin and the chemical
symbol (Cd, Hg or Pb) of the heavy metal which is responsible for the classification as pollutant:
1. "Cd" means cadmium. 2. "Hg" means mercury. 3. "Pb" stands for lead.

Chat with your PeakTech 1205 manual using AI

Get instant AI answers from your PeakTech 1205 manual

Ask anything about the PeakTech 1205. Answers come from this manual, with the pages they are based on.

1205 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the exterior casing

Wipe the cabinet regularly with a damp cloth and mild detergent. Do not use abrasives or solvents.

Before storage
Charge the battery

Charge the lithium battery for 4 hours before long-term storage to ensure sufficient electric quantity.

Show in the manual (page 121)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 1205?

Yes No

Frequently Asked Questions

A

The PeakTech 1205 provides up to 500 MSa/s sampling in supported modes and around 6k points of memory per channel, suitable for general-purpose waveform capture but limited for very long or ultra-high-resolution recordings.

Is this answer helpful?

A

Yes — the scope supports USB mass-storage devices. Use the COPY key to save screenshots (.bmp) or waveform/vector files (.bin) to a connected USB stick; vector files can be opened with the supplied PC software.

Is this answer helpful?

A

Yes. The FFT analyser supports up to 2048 time-domain points with selectable windows (Rectangular, Hanning, Hamming, Blackman), dB or Vrms formats and zoom multipliers for frequency-domain analysis.

Is this answer helpful?

A

Observe the CAT II overvoltage limits indicated, do not exceed the maximum input voltages (device-specified limits), avoid measuring high-energy industrial circuits, and use proper probe attenuation and fused 10 A range precautions to prevent damage or injury.

Is this answer helpful?

A

A fully charged Li-ion battery provides several hours of operation (typical up to ~4 hours). Charge via the supplied AC adapter; charging times shorten when the device is powered off. Monitor the on-screen battery icon and recharge when the BAT symbol appears.

Is this answer helpful?

A

Yes — the oscilloscope offers five automatic measurement windows and many parameters (frequency, period, Vpp, Vrms, Vmax/Vmin, rise/fall time, pulse widths, duty cycle, delays) with two measurement slots simultaneously displayed.

Is this answer helpful?

A

The integrated DMM provides useful functionality for troubleshooting with standard accuracies (percent-level ranges). For calibration-grade or high-precision metrology, a dedicated precision benchtop DMM is recommended.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual-channel DSO with integrated DMM — combines oscilloscope and multimeter functions in one portable unit.
  • FFT and waveform math — spectrum analysis plus CH1/CH2 arithmetic for advanced signal inspection.
  • Battery-powered portability with USB mass-storage support — save screenshots and waveform data on the go.
  • Comprehensive trigger modes — edge, video and alternate triggers with holdoff and sensitivity control.
  • Probe attenuation and AC/DC coupling options — flexible inputs for diverse measurement tasks.
VS

Disadvantages

  • Limited sample rate/bandwidth compared to high-end lab scopes — not ideal for very high-frequency signals.
  • Memory depth modest (6k points per channel) — limits detailed long-duration captures at high sample rates.
  • Multimeter accuracy and ranges are basic relative to precision benchtop DMMs.
  • 10 A current range is fused and has higher uncertainty — risks if used incorrectly without proper safety precautions.
  • Indoor-only rating and CAT II limitation — not suitable for high-energy industrial mains-level testing.
M: OA-GPT-5-NAN

Product Specification

Display

yes

Features

2-channel, 20MHz Bandwidth

M: OA-GPT-54-NAN

Product Description

PeakTech 1205 Digital-Oszilloskop — Compact, capable, and versatile

The PeakTech 1205 Digital-Oszilloskop is a portable dual-channel digital storage oscilloscope with integrated multimeter functions, designed for hobbyists, technicians, and field engineers who need an all-in-one measurement tool. It combines waveform capture, mathematical waveform operations, FFT spectrum analysis, and DMM features (voltage, current, resistance, capacitance, diode, continuity) in a lightweight unit with a color display and rechargeable Li-ion battery.

Equipped with two BNC inputs for CH1 and CH2, the 1205 offers selectable probe attenuation (1x to 1000x), AC/DC coupling, peak detection, averaging, persistence modes and a 5 V, 1 kHz calibration output for probe compensation. The front panel places AUTOSET, RUN/STOP, menu navigation and dedicated channel controls at your fingertips, while USB and RS-232 ports enable data export and connection to the bundled PC software for waveform transfer and analysis. The oscilloscope stores multiple waveforms, supports recording/playback modes, and can save screenshots or vector data to a USB mass storage device.

Triggering options are comprehensive: edge, video and alternate triggers with coupling filters, holdoff, and adjustable sensitivity to stabilize tricky signals. The math functions allow CH1/CH2 addition, subtraction, multiplication and division with adjustable scaling and zero offset. For frequency-domain work, the built-in FFT analyzes up to 2048 time-domain points with selectable windows (Rectangular, Hanning, Hamming, Blackman) and dB or Vrms display formats.

The digital multimeter mode provides DC/AC voltage up to rated limits, current measurement with mA and 10 A ranges (fused), resistance, capacitance (with a small-capacitance adapter and relative mode), diode and continuity tests. Safety features include CAT II overvoltage rating (up to device limits), multiple warnings about safe operation, a robust set of built-in protections, and an emphasis on indoor use and professional servicing only.

Compact (approx. 180 x 115 x 40 mm), lightweight and battery-powered for up to several hours on a full charge, the PeakTech 1205 is suitable for bench use and field diagnostics. It targets technicians who need a capable oscilloscope with multimeter functions and portable connectivity for data logging and PC-based analysis.

Notes

  • Ideal for troubleshooting, signal verification, and education; less suited for ultra-high-speed lab research where higher bandwidth and sample rates are required.
  • Use appropriate probe attenuation and safety-rated leads when measuring higher voltages.
  • Perform Auto-Calibration after large ambient temperature changes for best accuracy.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly