Manual.ly Logo

PeakTech 1035 Manual

0.0 · 0 Ratings

PDF manual · 72 Pages

English

M: QW-35-FL
page

/ 72

Loading...
8f1d487dfbfd99306859d82064fac893299e page 4
* Drehen Sie während einer Strom- oder Spannungsmessung
niemals am Messbereichswahlschalter, da hierdurch das Gerät
beschädigt wird.
* Messungen von Spannungen über 35V DC oder 25V AC nur in
Übereinstimmung mit den relevanten Sicherheitsbestimmungen
vornehmen. Bei höheren Spannungen können besonders
gefährliche Stromschläge auftreten.
* Ersetzen Sie die Batterie, sobald das Batteriesymbol „BAT“
aufleuchtet. Mangelnde Batterieleistung kann unpräzise
Messergebnisse hervorrufen. Stromschläge und körperliche
Schäden können die Folge sein.
* Sollten Sie das Gerät für einen längeren Zeitraum nicht benutzen,
entnehmen Sie die Batterie aus dem Batteriefach.
* Säubern Sie das Gehäuse regelmäßig mit einem feuchten
Stofftuch und einem milden Reinigungsmittel. Benutzen Sie keine
ätzenden Scheuermittel.
* Das Multimeter ist ausschließlich für Innenanwendungen
geeignet.
* Vermeiden Sie jegliche Nähe zu explosiven und entflammbaren
Stoffen.
* Öffnen des Gerätes und Wartungs- und Reparaturarbeiten dürfen
nur von qualifizierten Service-Technikern durchgeführt werden.
* Gerät nicht mit der Vorderseite auf die Werkbank oder
Arbeitsfläche legen, um Beschädigung der Bedienelemente zu
vermeiden.
* Keine technischen Veränderungen am Gerät vornehmen.
* -Messgeräte gehören nicht in Kinderhände-
Reinigung des Gerätes
Gerät nur mit einem feuchten, fusselfreien Tuch reinigen. Nur
handelsübliche Spülmittel verwenden. Beim Reinigen unbedingt
darauf achten, dass keine Flüssigkeit in das Innere des Gerätes
gelangt. Dies könnte zu einem Kurzschluss und zur Zerstörung des
Gerätes führen.
-3-

Chat with your PeakTech 1035 manual using AI

Get instant AI answers from your PeakTech 1035 manual

Ask anything about the PeakTech 1035. Answers come from this manual, with the pages they are based on.

1035 Maintenance Schedule

Remind me when maintenance is due
Yearly
Recalibrate the multimeter

The manufacturer recommends repeating the calibration after one year to maintain accuracy.

Show in the manual (page 15)
Periodically
Clean the device cabinet

Wipe the housing with a damp, lint-free cloth and mild detergent. Do not use abrasives or solvents. Ensure no liquid enters the interior.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 1035?

Yes No

Frequently Asked Questions

A

The PeakTech 1035 is rated for a maximum input of 600 V DC or AC RMS. Exceeding this limit may damage the internal circuitry or cause injury.

Is this answer helpful?

A

No, this device is designed exclusively for indoor applications. It should not be exposed to rain, extreme humidity, or direct sunlight.

Is this answer helpful?

A

Set the rotary switch to the battery test position (1.5 V or 9 V), connect the red lead to V/Ω/mA and black to COM, then touch the probes to the battery terminals.

Is this answer helpful?

A

OL stands for Overload. It indicates that the measured value exceeds the selected range, requiring you to switch to a higher measurement setting.

Is this answer helpful?

A

No, the PeakTech 1035 uses a manual rotary switch with 20 fixed positions. You must select the appropriate range manually.

Is this answer helpful?

A

It is recommended to recalibrate the device once a year to ensure continued accuracy within the specified tolerances.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Large 27 mm LCD with backlight for easy reading in low light
  • Comprehensive measurement capabilities including DC/AC voltage, current, resistance, and diode testing
  • Robust construction with full overload protection and shock resistance
  • Unique battery test function for accurate assessment of power sources under load
  • Clear automatic overrange indication with OL display
VS

Disadvantages

  • Limited to indoor use only due to environmental restrictions
  • Battery test function is not suitable for small button cells
  • Requires manual switching between ranges if auto-ranging is not selected
  • Maximum frequency range limited to 450 Hz for AC voltage measurements
  • Fuse replacement requires opening the casing which must be done carefully
M: QW-35-FL

Product Specification

Measurement Range

max. 10A, max. 600V, max. 2MΩ

Package Contents

Case, Test Leads

M: QW-35-FL

Product Description

PeakTech 1035 Digital Multimeter - Read, Download & Print Free

The PeakTech 1035 is a compact and rugged digital multimeter designed for professionals and hobbyists who require reliable measurements in various electrical applications. This 3½-digit device utilizes dual-slope A/D conversion with CMOS technology to ensure high precision and stability. It features a large 27 mm LCD display that offers excellent readability, complete with an automatic polarity indicator and a background light for use in dimly lit environments.

Equipped with a versatile rotary switch offering 20 positions, this multimeter simplifies the selection of functions and measurement ranges. Users can effortlessly measure DC and AC voltage, DC current, resistance, and perform diode tests. The device includes essential safety features such as full overload protection and specific fuses for different current ranges, ensuring the longevity of the instrument during demanding tasks. Safety standards are strictly adhered to, complying with EU directives for electromagnetic compatibility and low voltage, making it suitable for indoor use in categories up to CAT III at 600V.

Beyond basic measurements, the PeakTech 1035 boasts a unique battery test function that assesses batteries under load, providing a more accurate evaluation of their health than simple voltage checks. Additional conveniences include a Data-Hold function to freeze readings and an automatic overrange indication marked by "OL" on the display. The unit runs on a standard 9 V battery and comes with a carrying case, test leads, and comprehensive documentation. Whether you are troubleshooting circuits or performing routine maintenance, this tool combines durability with advanced functionality.

Key Highlights

This multimeter is built for performance and safety. Its robust design withstands shocks and vibrations, while the clear display ensures accurate data reading. The inclusion of specific safety probes for different voltage categories highlights its commitment to user protection. Regular calibration is recommended after one year of use to maintain guaranteed accuracy.

Important Notes

  • Always start with the highest range when measuring unknown values.
  • Do not exceed 600 V input to prevent damage.
  • Replace fuses only with the specified ratings (0.2A/600V or 10A/600V).
  • Ensure the device is fully closed before operation.
  • Dispose of used batteries according to local regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly