Manual.ly Logo

Optoma 4K400x Manual

0.0 · 0 Ratings

PDF manual · 55 Pages

English

M: QW-35-FL
page

/ 55

Loading...
fda48c156f56fce9c4d4ddccf013bb8324e8 page 5
English
5
± Liquid has been spilled on to the projector.
± Projector has been exposed to rain or moisture.
± Something has fallen in the projector or something is loose inside.
Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the
projector may become damaged.
Do not block the light coming out of the projector lens when in operation. The light will heat the object
and could melt, cause burns or start a re.
Please do not open or disassemble the projector as this may cause electric shock.
Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards. Please call Optoma before you send the unit for repair.
See projector enclosure for safety related markings.
The unit should only be repaired by appropriate service personnel.
Only use attachments/accessories specied by the manufacturer.
Do not look into straight into the projector lens during operation. The bright light may harm your eyes.
When replacing the lamp, please allow the unit to cool down. Follow instructions as described on pages
39-40.
This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows
warning messages.
Reset the "Lamp Reset" function from the on-screen display "Lamp Settings" menu after replacing the
lamp module.
When switching the projector off, please ensure the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the projector to cool down.
When the lamp is approaching to the end of its life time, the message "Lamp life exceeded." will show on
the screen. Please contact your local reseller or service center to change the lamp as soon as possible.
Turn off and unplug the power plug from the AC outlet before cleaning the product.
Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the unit.
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Note: When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has
been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on
pages 39-40.
Do not setup the projector in places where it might be subjected to vibration or shock.
Do not touch the lens with bare hands.
Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it can
adversely affect the quality of the projector performance.
Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
Cleaning the Lens
Before cleaning the lens, be sure to turn off the projector and unplug the power cord to allow it to
completely cool down.
Use a compressed air tank to remove the dust.
Use a special cloth for cleaning lens and gently wipe the lens. Do not touch the lens with your ngers.
Do not use alkaline/acid detergents or volatile solvents such as alcohol for cleaning lens. If the lens is
damaged due to the cleaning process, it is not covered by the warranty.

Chat with your Optoma 4K400x manual using AI

Get instant AI answers from your Optoma 4K400x manual

Ask anything about the Optoma 4K400x. Answers come from this manual, with the pages they are based on.

4K400x Maintenance Schedule

Remind me when maintenance is due
Yearly
Clean the lens

Turn off and unplug the projector. Use compressed air to remove dust, then gently wipe with a special cloth. Do not touch the lens with fingers.

When lamp life exceeded
Replace the lamp

Contact your local dealer or service center to replace the light bulb when the warning message Lamp life exceeded appears.

Show in the manual (page 39)
After cleaning
Reset filter counter

Reset the dust filter counter after replacing or cleaning the dust filter via the Setup menu.

Show in the manual (page 34)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 4K400x?

Yes No

Frequently Asked Questions

A

Turn off and unplug unit. Wait 30 mins for cool down. Remove cover and screws. Lift tab and pull module. Clean and insert new unit. Reset lamp hours in menu settings to ensure accurate tracking.

Is this answer helpful?

A

Yes, it supports front, rear, and ceiling mounting. Ensure at least 10 cm clearance from ceiling. Use recommended mounting kit for warranty safety to prevent damage.

Is this answer helpful?

A

Native 3840 x 2160 at 60 Hz. Also supports various PC resolutions via HDMI and VGA inputs. 4K UHD content is handled with full HDR support.

Is this answer helpful?

A

Yes, typically comes with manufacturer warranty. Check official website for specific terms regarding lamp life and replacement policies in your region. Contact local dealer for details.

Is this answer helpful?

A

Yes, enable 3D mode in menu. Requires passive 3D glasses and 3D content source. Maintain viewing distance of 3 times screen height to ensure safety.

Is this answer helpful?

A

Use dry air blower and special cloth. Do not use liquids or press hard. Remove batteries from remote if long storage is planned to prevent corrosion.

Is this answer helpful?

A

Yes, it has a 3.5 mm audio out and S/PDIF output for external sound systems. Internal 10W speaker is included for basic sound needs.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports native 4K UHD resolution for incredibly sharp visuals and detailed imagery in any environment.
  • Enhanced Gaming mode reduces input lag to 4.5 milliseconds for competitive play.
  • Dual HDMI 2.0 ports with HDCP 2.2 support for full high dynamic range compatibility.
  • Lens shift functions allow vertical and horizontal adjustments to center the image.
VS

Disadvantages

  • Lamp replacement is necessary over time and involves handling hot components safely.
  • 3D viewing requires compatible glasses and proper viewing distance to avoid eye strain.
  • No batteries included for remote control as they leak over time if stored too long.
M: QW-35-FL

Product Specification

Type

DLP, 1x 0.47"

Light Source

Lamp

Resolution (displayable)

Ultra HD (3840x2160)

Resolution (native)

Full HD (1920x1080)

Brightness

4000 ANSI Lumens (High / Standard / Eco)

Contrast

1,000,000:1

Screen Size

33-300 inches

Throw Distance

3.97-32.48 ft

Throw Ratio

1.50:1-1.66:1

Lens Shift

manual, vertical -0% +10%

Video Inputs

2x HDMI 2.0 In

Audio Ports

1x Digital Audio In (optical), 1x 3.5mm Audio Out

Other Ports

1x USB, 1x RS-232

Features

3D Ready (Active), 4K Upscaling, HDR, HLG, integrated speaker (1x 10W), Pixel-Shift

Lamp Life

4,000 / 10,000 / 15,000 Hours (Standard / Eco / Eco+)

Noise Level

28 / 26 dB(A) (Standard / Eco)

Power Consumption

305 / 220W (Standard / Eco)

Dimensions

12.4 x 4.65 x 10.63 inches (WxHxD)

Weight

8.77 lbs

Warranty

2 Years

M: QW-35-FL

Product Description

Experience True Home Cinema at Home with Optoma 4K Projectors

Stepping into the world of high-definition home entertainment begins with the right equipment. The Optoma 4K400x stands out as a powerful choice for users seeking immersive visual experiences without spending a fortune on cinema tickets. To get the most out of this device, understanding its full range of capabilities is essential. Many owners consult the Optoma 4K400x Manual to navigate the complex settings available within the operating system. This guide provides comprehensive information regarding installation, safety, and daily operation.

Image quality remains the cornerstone of any projector purchase. This model supports native 4K UHD resolution, ensuring every detail is sharp and clear. High dynamic range support allows for deeper contrast and more vibrant colors. Gamers will appreciate the enhanced gaming mode which significantly lowers input lag for competitive play. The OSD menu system allows deep customization of gamma, color temperature, and brightness levels. Users can select various modes tailored to movies, sports, or computer work.

Installation flexibility is another major strength. The unit can be placed on a table or mounted on a ceiling. Lens shift functions allow vertical and horizontal adjustments to center the image without moving the hardware. This is particularly useful for tight spaces where centering the projector is difficult. The optical throw ratio ensures a wide range of screen sizes can be achieved depending on the distance from the wall. Proper airflow is critical during setup. Ventilation openings must remain clear to prevent overheating.

Safety protocols are prioritized throughout the device operation. The lamp generates significant heat, so avoiding direct contact during use is necessary when maintenance is required. The system tracks lamp hours automatically and warns users when replacement is due. 3D viewing capabilities add another dimension to entertainment but require specific safety measures. Users should maintain an adequate viewing distance to reduce eye strain. Parents should supervise children closely during 3D sessions to prevent discomfort or motion sickness.

Maintenance routines extend the lifespan of the unit significantly. Cleaning the lens requires specific cloths and solvents to avoid damage. Air filters may need periodic cleaning depending on the environment. Battery removal from the remote is advised during long-term storage. Connectivity options include dual HDMI ports, USB for updates, and audio outputs for external speakers. RS 232 integration supports professional installation environments. The menu system allows for saving custom settings for different media types efficiently.

Note: Always ensure power is disconnected before internal cleaning or lamp replacement. Regular power cycling helps maintain system health.

This equipment transforms living spaces into private theaters when configured correctly. Contact local dealers for extended warranty information if needed.

M: QW-35-FL

© Copyright 2026 Manual.ly