Manual.ly Logo

Omnitronic XIRA-215A Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: QW-35-FL
page

/ 16

Loading...
dc295b0c5c895aa8c957cbeae3d8e8d32a1b page a
10
•
EN
2
Safety Instructions
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
HEALTH HAZARD!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
This PA system has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
•
Please make sure that there are no obvious
transport damages. Should you notice any
damages, do not take the device into operation and
immediately consult your local dealer.
•
Save the package and all packing materials. In the
event that a fixture must be returned to the factory,
it is important that the fixture be returned in the
original factory box and packing.
Protection Class
•
This device falls under protection class I. The
power plug must only be plugged into a protection
class I outlet. The voltage and frequency must
exactly be the same as stated on the device.
Wrong voltages or power outlets can lead to the
destruction of the device and to mortal electrical
shock.
Power Cord
•
Always plug in the power plug least. The power
plug must always be inserted without force. Make
sure that the plug is tightly connected with the
outlet.
•
Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Never touch them with wet hands, as this could
lead to mortal electrical shock.
•
Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord. Never
operate next to sources of heat or cold. Disregard
can lead to power cord damages, fire or mortal
electrical shock.
•
The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable
may be damaged which may lead to mortal
damage.
•
Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
•
The occupation of the connection cables is as
follows:
Cable
Pin
International
Brown Live L
Blue Neutral N
Yellow/Green
Earth
The earth has to be connected! If the device will be
directly connected with the local power supply
network, a disconnection switch with a minimum
opening of 3 mm at every pole has to be included
in the permanent electrical installation. The device
must only be connected with an electric installation
carried out in compliance with the IEC standards.
The electric installation must be equipped with a
Residual Current Device.
Liquids
•
There must never enter any liquid into power
outlets, extension cords or any holes in the housing
of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it
must immediately be disconnected. This is also
valid, if the device was exposed to high humidity.
Also if the device is still running, the device must
be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause
mortal electrical shock.
Foreign Objects
•
There must never be any objects entering into the
device. This is especially valid for metal parts. If
any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out
of operation and disconnected immediately.
Malfunction or short-circuits caused by metal parts
may cause mortal injuries.

Chat with your Omnitronic XIRA-215A manual using AI

Get instant AI answers from your Omnitronic XIRA-215A manual

Ask anything about the Omnitronic XIRA-215A. Answers come from this manual, with the pages they are based on.

XIRA-215A Maintenance Schedule

Frequent
Clean the speaker cabinet

Disconnect from power. Use a soft, lint-free, moistened cloth. Never use alcohol or solvents to avoid damaging the surface.

Show in the manual (page 14)
Regularly
Check device and power cord for damage

Inspect the unit and the mains cable periodically to ensure there are no damages, crimps, or issues with sharp edges.

Show in the manual (page 10)
Regularly
Monitor sound pressure level

Use a meter to regularly check that the sound pressure level stays within required limits to prevent hearing damage.

Show in the manual (page 14)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend XIRA-215A?

Yes No

Frequently Asked Questions

A

The system consumes 400 watts total power. It includes 300 watts RMS for the low-frequency woofer and 50 watts RMS for the high-frequency tweeter amplifier stage.

Is this answer helpful?

A

No, this device is designed exclusively for indoor use. Exposure to rain, moisture, or humidity can damage the insulation and electrical components, creating safety hazards.

Is this answer helpful?

A

Use Channel two inputs. You can connect a microphone using an XLR or 6.3mm jack. Press the input selector switch for microphone level to ensure proper gain settings.

Is this answer helpful?

A

The speakers reproduce frequencies ranging from 40 Hz to 20 kHz. This covers a wide spectrum suitable for most music and speech applications in professional settings.

Is this answer helpful?

A

Unplug the device from mains power first. Open the fuse holder on the rear panel. Replace the blown fuse with one of the exact same rating and type specified on the unit.

Is this answer helpful?

A

Yes, the XLR MIX OUT jack sends the summed signal of both channels. You can connect the input of additional active speakers to expand your sound system setup.

Is this answer helpful?

A

Disconnect power before cleaning. Use a soft, damp lint-free cloth. Do not use solvents or alcohol as these will damage the plastic cabinet finish.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Class D biamp amplifier delivers 400 watts total power.
  • DSP provides presets for Music, DJ, Monitor, and Sub.
  • Robust plastic housing ensures durability during transport.
  • Connects via XLR and 6.3mm jack inputs easily.
  • Flexible dual flange allows stand or floor mounting.
VS

Disadvantages

  • Unit weighs 20 kilograms which may be heavy for one person.
  • Indoor use only, not suitable for outdoor weather.
  • Fuses require manual replacement by authorized dealers.
  • No wireless connectivity like Bluetooth available.
  • High volume poses risk of hearing damage if unchecked.
M: QW-35-FL

Product Specification

Principle

2-Way

Tweeter

1x 1.35"

Woofer

1x 15"

Amplification

Active

Frequency Range

40Hz-20kHz

Power

300W RMS

Sensitivity

96dB

Dimensions

16.93x27.56x16.14in (WxHxD)

Weight

44.09 lbs

M: QW-35-FL

Product Description

Omnitronic XIRA-215A Overview

The Omnitronic XIRA-215A stands out as a powerful active loudspeaker designed for demanding professional environments. It is built with a lightweight yet stable plastic cabinet that ensures durability during transport. This full-range bass reflex system is ideal for mobile live applications and permanent installations. The device delivers high-quality audio with separate power amplifiers for low and high frequencies. A digital signal processor adds versatility with convenient application presets for rapid sound contouring. Users can switch between settings like Music, DJ, Monitor, and Sub to tailor the sound for specific requirements. It is highly rated by audio professionals globally.

Powerful Performance

The system features a 15-inch woofer paired with a titanium dome tweeter. Together they cover a frequency range from 40 Hz to 20 kHz. The total power consumption is 400 watts, with specific amplification for the low-frequency woofer and the high-frequency driver. A limiter function protects the speakers from overload, ensuring safety during high-volume events. The sensitivity is rated at 96 dB, making it loud enough for medium to large venues. This output ensures clear sound even in noisy environments where clarity is crucial.

Versatile Connectivity

Connectivity options are extensive for different setups. There are two channels for inputs. Channel one handles line-level signals from devices like CD players or mixers. Channel two accepts microphone or line inputs with a dedicated toggle switch for easy adjustment. A mixed XLR output allows for daisy-chaining further active speaker systems. This makes it easy to expand the sound system as needed for larger events. Cables should be high quality to prevent interference. Ensure all cables are secured properly to avoid accidents.

Flexible Installation

The enclosure allows for various setup configurations. It can function as a floor monitor, stand on a tripod, or be mounted on a wall. A dual flange on the bottom enables adjustment at zero and five-degree angles. This flexibility ensures the sound is directed accurately toward the audience. Always secure the units to prevent movement from bass vibrations or accidental impacts. Do not install above one hundred centimeters without secondary attachments for safety.

Maintenance and Safety

Regular cleaning is essential to maintain performance. Use a soft damp cloth and avoid solvents which damage surfaces. Never expose the unit to rain or high humidity as moisture reduces insulation. Safety is paramount when dealing with mains voltage. Always unplug the device before changing fuse settings or performing internal checks. If distortions occur, reduce volume immediately to prevent speaker damage. Protect your hearing by monitoring sound pressure levels regularly during use.

Final note: This system combines power and portability effectively for modern audio needs.

M: QW-35-FL

© Copyright 2026 Manual.ly