Manual.ly Logo

Omnitronic XFM-212AP Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
51648d9a6c4afd3d745f4bc4450bb8308206 page e
14
Unpacking
Please make sure that there are no obvious transport
damages. Should you notice any damages on the
connection panel or on the casing, do not take the
speaker system into operation and immediately consult
your local dealer.
Protection Class
This device falls under protection class I. The power
plug must only be plugged into a protection class I
outlet. The voltage and frequency must exactly be the
same as stated on the device. Wrong voltages or power
outlets can lead to the destruction of the device and to
mortal electrical shock.
Power Cord
Always plug in the power plug least. The power plug
must always be inserted without force. Make sure that
the plug is tightly connected with the outlet. Never let
the power cord come into contact with other cables!
Handle the power cord and all connections with the
mains with particular caution! Never touch them with
wet hands, as this could lead to mortal electrical shock.
Never modify, bend, strain mechanically, put pressure
on, pull or heat up the power cord. Never operate next
to sources of heat or cold. Disregard can lead to power
cord damages, fire or mortal electrical shock. The cable
insert or the female part in the device must never be
strained. There must always be sufficient cable to the
device. Otherwise, the cable may be damaged which
may lead to mortal damage. Make sure that the power
cord is never crimped or damaged by sharp edges.
Check the device and the power cord from time to time.
If extension cords are used, make sure that the core
diameter is sufficient for the required power
consumption of the device. All warnings concerning the
power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is
not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the
power cord. Otherwise, the cable or plug can be
damaged leading to mortal electrical shock. If the power
plug or the power switch is not accessible, the device
must be disconnected via the mains.
If the power plug or the device is dusty, the device must
be taken out of operation, disconnected and then be
cleaned with a dry cloth. Dust can reduce the insulation
which may lead to mortal electrical shock. More severe
dirt in and at the device should only be removed by a
specialist.
Liquids
There must never enter any liquid into power outlets,
extension cords or any holes in the housing of the
device. If you suppose that also a minimal amount of
liquid may have entered the device, it must immediately
be disconnected. This is also valid, if the device was
exposed to high humidity. Also if the device is still
running, the device must be checked by a specialist if
the liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
Foreign Objects
There must never be any objects entering into the
device. This is especially valid for metal parts. If any
metal parts like staples or coarse metal chips enter into
the device, the device must be taken out of operation
and disconnected immediately. Malfunction or short-
circuits caused by metal parts may cause mortal
injuries.
Secure Setup
Please note that speaker systems could move due to
bass beats and vibrations. Furthermore, unintended
pushes from DJs, musicians or the audience present
further risk. This is why the speaker system must
always be secured against moving or the respective
area has to be blocked.
Admissible Temperatures
The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
Prior to Switching on
Before the speaker system is switched on all faders and
volume controls have to be set to zero or minimum
position.
Operation
Operate the speaker system only after having
familiarized with its functions. Do not permit operation
by persons not qualified for operating the speaker
system. Most damages are the result of unprofessional
operation. Keep away children and amateurs!
Transport
This product is not designed for rigorous road use.
Move it carefully and without force. Please use the
original packaging if the device is to be transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Maintenance and Service
There are no serviceable parts inside the speaker
system. Maintenance and service operations are only to
be carried out by authorized dealers!
Batteries
Do not try to short-circuit, recharge, disassemble or
heat batteries (danger of explosion!). Remove the
batteries if the device is not used for a longer period of
time. Damaged/leaking batteries may cause harm to
your skin–use safety gloves.

Chat with your Omnitronic XFM-212AP manual using AI

Get instant AI answers from your Omnitronic XFM-212AP manual

Ask anything about the Omnitronic XFM-212AP. Answers come from this manual, with the pages they are based on.

XFM-212AP Maintenance Schedule

Regularly
Clean the speaker system

Unplug the device. Use a soft, lint-free, moistened cloth. Never use alcohol or solvents.

Show in the manual (page 21)
Periodically
Inspect power cord and plug for damage

Check the device and power cord from time to time for damage. Ensure the plug is firmly connected.

Show in the manual (page 14)
If dusty
Clean dust from device and plug

If the power plug or device is dusty, disconnect it from mains and clean with a dry cloth to prevent electrical shock.

Show in the manual (page 14)
Before long storage
Remove batteries from microphone and remote

Take out batteries if devices are not used for a longer period to prevent leakage damage.

Show in the manual (page 18)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend XFM-212AP?

Yes No

Frequently Asked Questions

A

No, this product is designed exclusively for indoor use. It should be protected from rain, moisture, and extreme temperatures to ensure safe operation and longevity.

Is this answer helpful?

A

Press the MODE button repeatedly until 'bt' appears on the display. Activate Bluetooth on your phone, select 'OMNITRONIC' from the list, and pair the devices. Music will then play through the speaker system.

Is this answer helpful?

A

The dynamic hand-held microphone requires two 1.5 V AA (Mignon) batteries. These are inserted into the compartment on the back of the microphone.

Is this answer helpful?

A

Yes, the system features XLR and 6.3 mm jack inputs for connecting external dynamic microphones, which can be mixed with the wireless signal using the level controls.

Is this answer helpful?

A

The red CLIP indicator signals that the amplifier is overloaded. You should immediately lower the master volume or reduce the input levels to prevent damage to the speakers.

Is this answer helpful?

A

The speaker can be mounted on stands or walls, but if installed higher than 100 cm, it must be secured with a safety cable to prevent falling and potential injury.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Integrated Bluetooth receiver for wireless music streaming from mobile devices
  • Built-in audio player supports USB and SD card playback with remote control
  • Includes a UHF wireless microphone for clear vocal transmission
  • Versatile connectivity with XLR and RCA inputs/outputs for various audio sources
  • Robust 2-way speaker system with 12-inch woofer and 1.34-inch tweeter
VS

Disadvantages

  • Designed strictly for indoor use and not suitable for harsh outdoor environments
  • Requires careful installation to prevent tipping, especially when mounted high
  • No internal serviceable parts; repairs must be handled by authorized dealers
  • Batteries for the microphone and remote must be purchased and replaced separately
  • Not designed for rigorous road use; transport requires original packaging
M: QW-35-FL

Product Specification

Principle

2-way

Tweeter

1x 1.34"/​34mm

Woofer

1x 12"/​304.8mm

Frequency range

50Hz-18kHz

Power

150W RMS

Audio connections

Stereo Line In (RCA), Mic In (XLR), Mic In (6.35mm jack), Line In (XLR), Line Out (XLR)

Other connections

USB, Card reader (SD)

Wireless

Bluetooth

Power supply

Battery, Mains power

Features

portable

Dimensions

14.76x22.83x12.40in (WxHxD)

Weight

46.08lbs

Consists of

2x compact speakers, 1x microphone

M: QW-35-FL

Product Description

Omnitronic XFM-212AP - Read, Download & Print Free

The Omnitronic XFM-212AP represents a versatile and robust solution for professional audio applications, designed to deliver high-quality sound in both permanent installations and live event settings. This active speaker system combines an integrated amplifier with a passive satellite unit, creating a powerful 2-way configuration that handles vocals and music with clarity and depth. The system features a large 30 cm woofer paired with a 3.4 cm tweeter, ensuring rich bass response and crisp highs across a wide frequency range of 50 Hz to 18,000 Hz.

One of the standout features of the XFM-212AP is its built-in multimedia capabilities. Users can stream music wirelessly via Bluetooth from smartphones or tablets, eliminating the need for cumbersome cables during performances. Additionally, the integrated audio player supports USB drives and SD cards, allowing for direct playback of MP3 and WMA files. Control over these functions is intuitive, utilizing front-panel buttons or a dedicated infrared remote control for seamless operation. The system also includes a UHF wireless microphone operating at 865 MHz, providing reliable vocal transmission without interference.

Safety and stability are paramount in the design of this unit. The speaker box comes equipped with a mounting flange, making it easy to install on stands or subwoofers. However, users must adhere to strict safety guidelines regarding installation height and load-bearing capacity to prevent accidents. The device is intended for indoor use only and requires a standard 230 V power supply. Proper maintenance involves regular cleaning with a damp cloth and ensuring batteries are removed during extended periods of non-use to prevent leakage.

Whether you are setting up a small venue or a larger stage, the Omnitronic XFM-212AP offers the flexibility and performance needed for professional results. Its comprehensive connectivity options, including XLR and RCA inputs, allow for easy integration with mixers, CD players, and other audio sources. By following the detailed operational instructions, users can ensure years of reliable service and optimal sound quality.

M: QW-35-FL

© Copyright 2026 Manual.ly