Manual.ly Logo

Omnitronic XDP-1501 Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: QW-35-FL
page

/ 20

Loading...
ad6474e499aaf909e80c2a2a0feab0a4a80d page b
11
•
EN
2
Safety Instructions
Caution!
Keep this device away from rain and moisture!
Caution!
Be careful with your operations. With a
dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
Caution!
T
his device is equipped with a class 1 laser
diode. To ensure a safe operation do not
remove any covers or attempt to access the
inside of the product.
This device has left our premises in absolutely
perfect condition. In order to maintain this
condition and to ensure a safe operation, it is
absolutely necessary for the user to follow the
safety instructions and warning notes written in
this user manual. Damages caused by the
disregard of this user manual are not subject to
warranty. The dealer will not accept liability for
any resulting defects or problems.
Unpacking
• Please make sure that there are no obvious
transport damages. Should you notice any
damages, do not take the device into operation
and immediately consult your local dealer.
• Save the package and all packing materials. In
the event that a fixture must be returned to the
factory, it is important that the fixture be
returned in the original factory box and packing.
Protection Class
• This device falls under protection class II and
features a protective insulation. The power plug
must only be plugged into a suitable outlet. The
voltage and frequency must exactly be the same
as stated on the device. Wrong voltages or
power outlets can lead to the destruction of the
device and to mortal electrical shock.
Power Cord
• Always plug in the power plug least. The power
plug must always be inserted without force.
Make sure that the plug is tightly connected with
the outlet.
• Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular
caution! Never touch them with wet hands, as
this could lead to mortal electrical shock.
• Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord.
Never operate next to sources of heat or cold.
Disregard can lead to power cord damages, fire
or mortal electrical shock.
• The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the
cable may be damaged which may lead to
mortal damage.
• Make sure that the power cord is never crimped
or damaged by sharp edges. Check the device
and the power cord from time to time.
• If extension cords are used, make sure that the
core diameter is sufficient for the required power
consumption of the device. All warnings
concerning the power cords are also valid for
possible extension cords.
• Always disconnect from the mains, when the
device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull
out the plug by tugging the power cord.
Otherwise, the cable or plug can be damaged
leading to mortal electrical shock. If the power
plug or the power switch is not accessible, the
device must be disconnected via the mains.
• If the power plug or the device is dusty, the
device must be taken out of operation,
disconnected and then be cleaned with a dry
cloth. Dust can reduce the insulation which may
lead to mortal electrical shock. More severe dirt
in and at the device should only be removed by
a specialist.
Liquids
• There must never enter any liquid into power
outlets, extension cords or any holes in the
housing of the device. If you suppose that also a
minimal amount of liquid may have entered the
device, it must immediately be disconnected.
This is also valid, if the device was exposed to
high humidity. Also if the device is still running,
the device must be checked by a specialist if the
liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
Foreign Objects
• There must never be any objects entering into
the device. This is especially valid for metal
parts. If any metal parts like staples or coarse
metal chips enter into the device, the device
must be taken out of operation and
disconnected immediately. Malfunction or short-
circuits caused by metal parts may cause mortal
injuries.

Chat with your Omnitronic XDP-1501 manual using AI

Get instant AI answers from your Omnitronic XDP-1501 manual

Ask anything about the Omnitronic XDP-1501. Answers come from this manual, with the pages they are based on.

XDP-1501 Maintenance Schedule

From time to time
Check device and power cord for damage

Inspect the unit and power cord periodically for signs of wear or damage. Ensure cables are not crimped or damaged by sharp edges.

Show in the manual (page 11)
When dusty
Clean device if power plug is dusty

If the power plug or device becomes dusty, disconnect from mains and clean with a dry cloth to prevent reduced insulation and electrical shock.

Show in the manual (page 11)
Before cleaning
Disconnect mains before cleaning

Always unplug the device from the mains before cleaning. Use only a soft, damp cloth; never use solvents or aggressive detergents.

Show in the manual (page 12)
After long storage
Remove remote batteries after non-use

If the remote control is not used for a longer period, remove the AAA batteries to prevent damage from potential battery leakage.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend XDP-1501?

Yes No

Frequently Asked Questions

A

The unit supports Audio CD, CD-R, CD-RW, and MP3 CDs. It also accepts MP3 files from USB storage devices up to 64 GB. This versatility allows users to play various media in both fixed and portable setups efficiently.

Is this answer helpful?

A

Yes, the device is designed for 19-inch rack installation requiring 1 HE of space. It also has mounting points suitable for fixed installations, though it can function as a desktop unit provided adequate airflow is maintained through ventilation.

Is this answer helpful?

A

Yes, there is a microphone input jack located on the front panel with a 6.3-mm connector. The level can be adjusted using the rear panel controls to match the user needs without causing feedback issues in the sound system.

Is this answer helpful?

A

You can use the balanced XLR outputs or unbalanced RCA outputs on the rear panel. These outputs can be used simultaneously for different audio chains. Always ensure the device is powered off before connecting to prevent signal spikes.

Is this answer helpful?

A

Yes, the remote requires two 1.5-V AAA batteries. They are installed in the battery compartment on the back. Ensure batteries are removed during long periods of non-use to prevent leakage and damage to the electronic components inside.

Is this answer helpful?

A

If metal parts enter the device, it must be disconnected immediately. Do not attempt to operate it as this can cause short circuits or electric shock. Contact a professional technician for inspection and removal of the object.

Is this answer helpful?

A

The device should not be used where rain or moisture is present. It requires an environment temperature between -5 and +45 degrees Celsius. Outdoor use requires a sheltered area to protect against weather and potential electrical hazards.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports both CD and USB media for versatile music playback options
  • Includes advanced pitch control with +/-4, +/-8, and +/-16 percent ranges
  • Features seamless looping and cueing functions for professional DJ use
  • Compatible with standard 19-inch racks or desktop use
  • Equipped with adjustable microphone input for announcements or live vocals
VS

Disadvantages

  • USB storage limited to maximum 64 GB capacity support
  • Remote control requires line of sight to function properly
  • No Bluetooth connectivity for wireless streaming
  • Powers up only via AC mains electricity connection
  • Requires specific safety precautions to avoid electrical hazards
M: QW-35-FL

Product Specification

Audio Formats

CD-Audio, CD-R/RW, DVD-R/RW, DVD+R/RW, MP3

Tuner

FM, DAB, DAB+, Internet Radio

Audio Connections

2x Stereo Line Out (RCA), Stereo Line Out (XLR), Mic In (0.25" Jack)

Additional Connections

USB-A

Features

Remote Control

Color

Black

Dimensions

18.98x1.77x10.63in (WxHxD)

Weight

6.66 lbs

M: QW-35-FL

Product Description

Overview

The Omnitronic XDP-1501 stands out as a versatile 1U flat CD player designed for professional fixed installations. Whether you are managing audio in restaurants, dance studios, or retail outlets, this unit delivers precise music control. It handles both standard CDs and USB storage devices seamlessly. Professional users appreciate the included microphone input with adjustable levels via XLR and jack connectors. The Omnitronic XDP-1501 Manual provides detailed insights into operating these advanced features effectively.

Audio enthusiasts will find the pitch control feature particularly useful. It allows speed adjustments of +/-4, +/-8, or +/-16 percent without altering playback quality significantly thanks to pitch bending capabilities. This is essential for DJs mixing tracks during live events. The device supports Seamless Loops and Cueing, ensuring smooth transitions between songs. A bright dot-matrix VFD display shows ID3 tag information for MP3 files alongside standard audio CD data. Time display options include elapsed time, remaining title time, and total remaining time depending on the media type.

Installation is straightforward for rack environments using 19-inch mounting points. It requires 1 HE of rack space but functions well on a desktop too. Airflow through ventilation openings must remain unobstructed to prevent overheating. Power supply supports a wide voltage range from 100 to 240 volts AC, making it suitable for global use. Safety protocols emphasize protecting the unit from moisture and dust to maintain insulation and prevent electrical shock hazards.

Connection flexibility is robust with balanced XLR outputs and unbalanced RCA line inputs. This ensures compatibility with various mixer and amplifier systems. The IR remote control simplifies operation from a distance. For navigation, the search buttons allow frame-accurate positioning within titles. Loop functions can be programmed with high precision down to a single frame. The device includes a 15-second anti-shock buffer to protect discs from skipping due to vibration. Users should refer to the Omnitronic XDP-1501 Manual for specific wiring diagrams and cable connection guidelines to ensure optimal signal quality and minimize interference noise. Regular maintenance involves cleaning with a soft dry cloth and ensuring no foreign objects enter the chassis. Always disconnect power before maintenance.

This compact player combines durability with professional features. Its design focuses on ease of use for both novice and experienced audio operators. By following recommended safety instructions, users can avoid damage and voided warranty claims. The unit weighs 2.9 kg and measures 48 by 4.8 by 27 cm. Environmental considerations urge proper recycling at the end of the product life cycle. Batteries in the remote should be removed during long storage periods. Overall, the hardware represents a solid choice for reliable music playback solutions in commercial settings.

M: QW-35-FL

© Copyright 2026 Manual.ly