Omnitronic OD-2 Manual
PDF manual · 12 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Omnitronic OD-2 manual using AI
Get instant AI answers from your Omnitronic OD-2 manual
Ask anything about the Omnitronic OD-2. Answers come from this manual, with the pages they are based on.
OD-2 Maintenance Schedule
Inspect screws, housing, and cables for damage or corrosion. Check installation points for deformations.
Safety-related and machine-technical installations must be inspected by an expert every four years.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend OD-2?
Yes NoFrequently Asked Questions
Each OD-2 has a rated power of 15 W RMS and a program power rating of 30 W. Do not exceed these ratings to avoid damage and voiding the warranty.
Is this answer helpful?
No. The OD-2 is designed for indoor permanent installation only. The ABS housing and internal components are not sealed against moisture; outdoor use or exposure to rain can cause damage and safety hazards.
Is this answer helpful?
Use the supplied mounting plate and ensure the mounting surface supports at least five times the system’s weight. Overhead installs require qualified professionals, correct fixings for the substrate, and regular safety inspections to prevent falling hazards.
Is this answer helpful?
The OD-2 has an impedance of 8 ohms and a sensitivity of 88 dB (1 W/1 m). When wiring multiple speakers, account for impedance changes (parallel/series) and ensure the amplifier can drive the resulting load.
Is this answer helpful?
Wipe the cabinet and grille with a soft, damp, lint-free cloth. Do not use alcohol or solvents. Periodically check mountings, screws and cables for corrosion or loosening, and have installations in public areas inspected annually or every four years by a qualified professional.
Is this answer helpful?
Expect clear midrange and high-frequency reproduction up to 22 kHz with a maximum SPL around 92 dB at 1 m. Low-frequency response begins at ~150 Hz, so deep bass is limited without a subwoofer.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Compact, discreet ABS cabinet with metal grille ideal for visible indoor installations
- Versatile mounting plate with pan/tilt joint enables flexible wall or ceiling angling
- Good sensitivity (88 dB) and 30 W program power for clear vocal and mid/high reproduction
- Simple spring-clamp connections speed up wiring and ensure secure polarity
- Durable build and scratch-resistant finish suitable for commercial environments
Disadvantages
- Limited low-frequency extension (starts at 150 Hz) — bass requires additional subwoofer
- Indoor use only; not rated for outdoor or wet environments
- Overhead mounting requires professional installation and safety inspections
- Rated power is modest (15 W RMS) — not suited for very loud PA duties
- Warranty void if damaged by overload or improper installation
Product Specification
Principle
1-Way
Woofer
1x 2.50"/2.50in
Amplification
passive
Frequency Range
150Hz-22kHz
Power Handling
15W RMS, 30W Peak
Impedance
8Ω
Sensitivity
88dB
Max SPL
92dB
Coverage Angle
60°x60°
Dimensions
3.43x3.54x4.37in (WxHxD)
Weight
1.10 lb
Product Description
Omnitronic OD-2, Paar — Compact Wall Speakers with Reliable Performance
The Omnitronic OD-2 pair is a compact, 1-way wall/ceiling speaker system designed for background and foreground audio in venues such as restaurants, bars, shops and conference rooms. Each OD-2 houses a 2.5" full-range driver in a rugged ABS cabinet with a metal grille and a versatile mounting plate with a panning/tilting joint for flexible installation angles. With an 8-ohm impedance and 30 W program power (15 W RMS rated), these speakers deliver clear midrange and high-frequency reproduction up to 22 kHz while remaining small and unobtrusive.
Ideal for fixed indoor installations, the OD-2 pair features spring-clamp terminals for straightforward wiring and a consistent 60° x 60° dispersion suitable for focused coverage. The attractive yet durable plastic housing resists scratches and impacts, making the set practical for both commercial and institutional spaces. Mounting hardware supports wall or ceiling placement; installers should ensure proper load rating and follow safety rules for overhead mounting.
Performance-wise the OD-2 offers 88 dB sensitivity (1 W/1 m) and a maximum SPL around 92 dB (1 m), making it well-suited for background music and speech reinforcement without occupying much visual space. The frequency response starts at 150 Hz, so while bass extension is limited, the loudspeakers reproduce vocals and high frequencies faithfully, especially when combined with adequate room acoustics or a subwoofer in larger installations.
Installation and operation emphasize safety and correct amplifier matching: never exceed rated power, maintain correct speaker polarity when wiring multiple cabinets, and respect impedance changes when wiring parallel or series. Regular inspections of fastenings and cables, cleaning with a damp lint-free cloth (no solvents), and professional servicing ensure long-term reliability. The OD-2 pair is a pragmatic, cost-effective solution for compact, permanent audio installations where discreet appearance and dependable speech/music clarity are priorities.
Notes
- Suitable for indoor permanent installation only; not weatherproof.
- Use an appropriate amplifier and avoid prolonged distortion to prevent damage and voided warranty.
- Maintain at least 50 cm clearance for ventilation and perform periodic safety checks on mounts and cabling.
Search for 67,706 Manuals online
Type-in Brand or Model