Manual.ly Logo

Omnitronic OD-2 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-5-NAN
page

/ 12

Loading...
36a283fb4486eaa83b8776aed44b97611066 page 8
8
This speaker has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety
instructions and warning notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
connection panel or on the casing, do not take the speaker into operation and immediately consult your local
dealer.
Keep away children and amateurs! There are no serviceable parts inside the speaker system.
Maintenance and service operations are only to be carried out by authorized dealers.
..............................................................................................................................................................................
OPERATING DETERMINATIONS
The speaker must only be used for permanent installations and is only allowed to be connected with an
appropriate amplifier. This product is designed for indoor use only.
The maximum power of the speaker must never be exceeded. When operating the speaker, please make
sure that the loudspeakers always sound well. When distortions can be heard, either the amplifier or the
loudspeaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In order to avoid
damage, please reduce the volume immediately when distortions can be heard. When speakers are
destroyed by overload, the guarantee becomes void.
The ambient temperature must always be between -5° C and +45° C.
Keep away from direct insulation (particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This product must only be operated in an altitude between -20 and 2000 m over NN.
Operate the speaker only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the speaker. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the speaker! Rather use a soft and damp
cloth.
Please consider that unauthorized modifications on the speaker are forbidden due to safety reasons!
If this speaker will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
crashes, hearing loss etc.
WARNING!
Speaker systems must only be operated by trained persons. Danger of Life due to crashing
speaker systems or hearing loss due to excessive sound pressure levels! The different local
conditions have to be considered in terms of safety rules.
HEALTH HAZARD!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.

Chat with your Omnitronic OD-2 manual using AI

Get instant AI answers from your Omnitronic OD-2 manual

Ask anything about the Omnitronic OD-2. Answers come from this manual, with the pages they are based on.

OD-2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Annual safety inspection by skilled person

Inspect screws, housing, and cables for damage or corrosion. Check installation points for deformations.

Every 4 years
Expert acceptance test of installation

Safety-related and machine-technical installations must be inspected by an expert every four years.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend OD-2?

Yes No

Frequently Asked Questions

A

Each OD-2 has a rated power of 15 W RMS and a program power rating of 30 W. Do not exceed these ratings to avoid damage and voiding the warranty.

Is this answer helpful?

A

No. The OD-2 is designed for indoor permanent installation only. The ABS housing and internal components are not sealed against moisture; outdoor use or exposure to rain can cause damage and safety hazards.

Is this answer helpful?

A

Use the supplied mounting plate and ensure the mounting surface supports at least five times the system’s weight. Overhead installs require qualified professionals, correct fixings for the substrate, and regular safety inspections to prevent falling hazards.

Is this answer helpful?

A

The OD-2 has an impedance of 8 ohms and a sensitivity of 88 dB (1 W/1 m). When wiring multiple speakers, account for impedance changes (parallel/series) and ensure the amplifier can drive the resulting load.

Is this answer helpful?

A

Wipe the cabinet and grille with a soft, damp, lint-free cloth. Do not use alcohol or solvents. Periodically check mountings, screws and cables for corrosion or loosening, and have installations in public areas inspected annually or every four years by a qualified professional.

Is this answer helpful?

A

Expect clear midrange and high-frequency reproduction up to 22 kHz with a maximum SPL around 92 dB at 1 m. Low-frequency response begins at ~150 Hz, so deep bass is limited without a subwoofer.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact, discreet ABS cabinet with metal grille ideal for visible indoor installations
  • Versatile mounting plate with pan/tilt joint enables flexible wall or ceiling angling
  • Good sensitivity (88 dB) and 30 W program power for clear vocal and mid/high reproduction
  • Simple spring-clamp connections speed up wiring and ensure secure polarity
  • Durable build and scratch-resistant finish suitable for commercial environments
VS

Disadvantages

  • Limited low-frequency extension (starts at 150 Hz) — bass requires additional subwoofer
  • Indoor use only; not rated for outdoor or wet environments
  • Overhead mounting requires professional installation and safety inspections
  • Rated power is modest (15 W RMS) — not suited for very loud PA duties
  • Warranty void if damaged by overload or improper installation
M: OA-GPT-5-NAN

Product Specification

Principle

1-Way

Woofer

1x 2.50"/2.50in

Amplification

passive

Frequency Range

150Hz-22kHz

Power Handling

15W RMS, 30W Peak

Impedance

8Ω

Sensitivity

88dB

Max SPL

92dB

Coverage Angle

60°x60°

Dimensions

3.43x3.54x4.37in (WxHxD)

Weight

1.10 lb

M: OA-GPT-54-NAN

Product Description

Omnitronic OD-2, Paar — Compact Wall Speakers with Reliable Performance

The Omnitronic OD-2 pair is a compact, 1-way wall/ceiling speaker system designed for background and foreground audio in venues such as restaurants, bars, shops and conference rooms. Each OD-2 houses a 2.5" full-range driver in a rugged ABS cabinet with a metal grille and a versatile mounting plate with a panning/tilting joint for flexible installation angles. With an 8-ohm impedance and 30 W program power (15 W RMS rated), these speakers deliver clear midrange and high-frequency reproduction up to 22 kHz while remaining small and unobtrusive.

Ideal for fixed indoor installations, the OD-2 pair features spring-clamp terminals for straightforward wiring and a consistent 60° x 60° dispersion suitable for focused coverage. The attractive yet durable plastic housing resists scratches and impacts, making the set practical for both commercial and institutional spaces. Mounting hardware supports wall or ceiling placement; installers should ensure proper load rating and follow safety rules for overhead mounting.

Performance-wise the OD-2 offers 88 dB sensitivity (1 W/1 m) and a maximum SPL around 92 dB (1 m), making it well-suited for background music and speech reinforcement without occupying much visual space. The frequency response starts at 150 Hz, so while bass extension is limited, the loudspeakers reproduce vocals and high frequencies faithfully, especially when combined with adequate room acoustics or a subwoofer in larger installations.

Installation and operation emphasize safety and correct amplifier matching: never exceed rated power, maintain correct speaker polarity when wiring multiple cabinets, and respect impedance changes when wiring parallel or series. Regular inspections of fastenings and cables, cleaning with a damp lint-free cloth (no solvents), and professional servicing ensure long-term reliability. The OD-2 pair is a pragmatic, cost-effective solution for compact, permanent audio installations where discreet appearance and dependable speech/music clarity are priorities.

Notes

  • Suitable for indoor permanent installation only; not weatherproof.
  • Use an appropriate amplifier and avoid prolonged distortion to prevent damage and voided warranty.
  • Maintain at least 50 cm clearance for ventilation and perform periodic safety checks on mounts and cabling.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly