Manual.ly Logo

Omnitronic MAXX-1508DSP Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: OA-GPT-5-NAN
page

/ 28

Loading...
9cca9f8c9a9a3ec5b96b275b93b36df65f9c page 10
16 • EN
2 Safety Instructions
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
HEALTH HAZARD!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
This PA system has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
• Please make sure that there are no obvious
transport damages. Should you notice any
damages, do not take the device into operation and
immediately consult your local dealer.
• Save the package and all packing materials. In the
event that a fixture must be returned to the factory,
it is important that the fixture be returned in the
original factory box and packing.
Protection Class
• This device falls under protection class I. The
power plug must only be plugged into a protection
class I outlet. The voltage and frequency must
exactly be the same as stated on the device.
Wrong voltages or power outlets can lead to the
destruction of the device and to mortal electrical
shock.
Power Cord
• Always plug in the power plug least. The power
plug must always be inserted without force. Make
sure that the plug is tightly connected with the
outlet.
• Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Never touch them with wet hands, as this could
lead to mortal electrical shock.
• Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord. Never
operate next to sources of heat or cold. Disregard
can lead to power cord damages, fire or mortal
electrical shock.
• The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable
may be damaged which may lead to mortal
damage.
• Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
• The occupation of the connection cables is as
follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth has to be connected! If the device will be
directly connected with the local power supply
network, a disconnection switch with a minimum
opening of 3 mm at every pole has to be included
in the permanent electrical installation. The device
must only be connected with an electric installation
carried out in compliance with the IEC standards.
The electric installation must be equipped with a
Residual Current Device.
Liquids
• There must never enter any liquid into power
outlets, extension cords or any holes in the housing
of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it
must immediately be disconnected. This is also
valid, if the device was exposed to high humidity.
Also if the device is still running, the device must
be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause
mortal electrical shock.
Foreign Objects
• There must never be any objects entering into the
device. This is especially valid for metal parts. If
any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out
of operation and disconnected immediately.
Malfunction or short-circuits caused by metal parts
may cause mortal injuries.

Chat with your Omnitronic MAXX-1508DSP manual using AI

Get instant AI answers from your Omnitronic MAXX-1508DSP manual

Ask anything about the Omnitronic MAXX-1508DSP. Answers come from this manual, with the pages they are based on.

MAXX-1508DSP Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the PA system

Disconnect from mains before cleaning. Use a soft, lint-free damp cloth; never use alcohol or solvents, and prevent liquids entering the device.

Show in the manual (page 23)
Monthly
Inspect the device and power cord for damage

Check the device and power cord from time to time for crimping, sharp-edge damage, or other damage.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend MAXX-1508DSP?

Yes No

Frequently Asked Questions

A

The system provides 700 W RMS total: 400 W for the low-frequency (subwoofer) section and 2×150 W for the high-frequency satellite sections using a Class-D amplifier design.

Is this answer helpful?

A

Yes. The MAXX-1508 includes an integrated Bluetooth receiver. Activate the Bluetooth button to enter pairing mode, select “OMNITRONIC MAXX-1508” on your device, and stream audio wirelessly. Unlock the Bluetooth button to disconnect.

Is this answer helpful?

A

Start with SAT and SUB level controls at minimum, power on sources before the unit, increase volume gradually, and monitor the LIMIT LED. Reduce levels if the LIMIT indicator lights frequently or audible distortion occurs to prevent driver damage.

Is this answer helpful?

A

Connections include combo XLR/6.3 mm inputs (L/R), an RCA stereo input with a +5 dB sensitivity switch, and balanced XLR LINK OUTs for feeding additional active speakers. Satellite speaker jacks connect the passive satellites to the subwoofer.

Is this answer helpful?

A

Yes. Satellites have a 35 mm standard flange and M8 threaded inserts for suspension; the subwoofer features an M20 flange for pole mounting a satellite. Always use proper safety attachments and follow installation guidelines.

Is this answer helpful?

A

Yes. A built-in USB charging port supplies up to 5 V/2 A for charging mobile devices while the PA system is powered.

Is this answer helpful?

A

Clean with a soft, damp lint-free cloth and disconnect mains beforehand. Do not use solvents. Internal service (beyond fuse replacement) should be performed by authorized dealers; always use original spare parts.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Powerful 700 W RMS output (400 W LF + 2×150 W HF) for mobile PA and medium events.
  • DSP with Flat/DJ/LIVE presets and limiter enables quick tonal tailoring and driver protection.
  • Integrated Bluetooth streaming and USB 5 V/2 A charging port for modern mobile workflows.
  • Sturdy 16 mm MPX/MDF subwoofer enclosure with M20 flange and optional castors for transport.
  • Multiple inputs (XLR/6.3 mm combo, RCA) and XLR parallel outputs for flexible system linking.
VS

Disadvantages

  • Designed for indoor use only; not rated for outdoor exposure to rain or heavy moisture.
  • Relatively heavy subwoofer (29 kg) may require assistance to move despite optional castors.
  • No onboard mixing features—external mixer required for multiple mic/line sources.
  • Satellite drivers are passive; speaker wiring must be correct and secure to avoid issues.
  • Maintenance and internal repairs require authorized service; few user-serviceable parts.
M: OA-GPT-5-NAN

Product Specification

Principle

2-Way

Tweeter

1x 1"

Woofer

1x 8"

Amplification

passive

Frequency Range

120Hz-18kHz

Power Handling

150W RMS, 300W Peak

Impedance

4 Ohm

Sensitivity

92dB

SPL max.

116dB

Dispersion Angle

90x60 degrees

Dimensions

11.22x18.35x11.34in (WxHxD)

Weight

18.74lb

M: OA-GPT-54-NAN

Product Description

Omnitronic MAXX-1508 Manual — Powerful Portable 2.1 PA System

The Omnitronic MAXX-1508 is a compact, mobile 2.1 active PA system designed for solo performers, bands and mobile DJs who need robust output and clear, balanced sound. Built around a 15" subwoofer with a Class-D amplifier and two 8" satellite speakers with 1" compression drivers, the system delivers 700 W RMS (400 W LF + 2×150 W HF) and a frequency coverage tailored for full-range live playback. A bass-reflex subwoofer yields tight, dry low end while passive two-way crossovers with PTC tweeter protection ensure the satellites stay safe at high SPLs.

Key features and usage

Equipped with a DSP offering three presets (Flat, DJ, Live), a signal limiter and separate level controls for subwoofer and satellites, the MAXX-1508 adapts quickly to different venues. Inputs include combo XLR/6.3 mm jacks and RCA (Cinch) with a +5 dB sensitivity switch, plus parallel XLR outputs for linking additional systems. Integrated Bluetooth streaming makes quick wireless playback possible and a USB 5 V/2 A charging port doubles as a handy powerbank for mobile devices.

The subwoofer cabinet is made from 16 mm multiplex/MDF with ergonomic handles, structural lacquer and a metal grille; satellites use 16 mm MDF and feature stand flanges and M8 threaded inserts for hanging or secure mounting. Optional castors, stands, distance tubes and stand forks improve transport and installation flexibility. The system is intended for indoor mobile PA use and includes safety and operating guidance to avoid overload, moisture and improper wiring.

Practical setup and operation

Position the subwoofer centrally between satellites or mount a satellite on the M20 flange. Use short, high-quality, balanced cables where possible to reduce noise. Start sources before powering the unit, set SAT and SUB levels low initially, then adjust. Use the DSP presets to quickly tailor tonal balance, and watch the LIMIT LED to prevent distortion and protect drivers. For suspended or overhead installs use the M8 inserts and always employ safety bonds.

Notes

  • Designed for indoor mobile PA applications; observe ambient temperature and humidity limits.
  • Follow safety instructions: earth connection required, disconnect before cleaning or fuse replacement.
  • Use only original spare parts; maintenance should be performed by authorized service.

Pros and cons are provided below, plus a short FAQ to answer common operational questions. The product is available in black or white and is sold with two speaker cables and a detailed manual.

M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly