Manual.ly Logo

Omnitronic ALP-6A Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-5-NAN
page

/ 12

Loading...
e084cb93c4b19703515e0e4bd8176ebb87fb page 9
9
•
EN
Ambient Conditions
•
The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C.
•
This device must only be operated in an altitude
between -20 and 2000 m over NN.
•
Never use the device during thunderstorms. Over
voltage could destroy the device. Always
disconnect the device during thunderstorms.
•
This device must never be operated or stockpiled
in surroundings where splash water, rain, moisture
or fog may harm the device. Moisture or very high
humidity can reduce the insulation and lead to
mortal electrical shocks.
•
When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and
is installed in a distance of 0.5 meters between
smoke machine and device.
Installation
•
Do not shake the device. Avoid brute force when
installing or operating the device. When choosing
the installation spot, please make sure that the
device is not exposed to extreme heat, moisture or
dust. There should not be any cables lying around.
You endanger your own and the safety of others!
Setup
•
Operate the device only after having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device. Most
damages are the result of unprofessional
operation!
•
During the operation, please make sure that the
loudspeakers always sound well. When distortions
can be heard, either the amplifier or the
loudspeakers are overloaded. Overloads can
quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume
immediately when distortions can be heard. Always
check the sound pressure level with a meter in
order to keep to the threshold.
Commercial Use
•
Operating an amplification system in public or
industrial areas, a series of safety instructions have
to be followed. The operator must therefore inform
himself on the current safety instructions and
consider them.
Transport
•
Please use the original packaging if the device is to
be transported.
Modifications and Warranty
•
Please consider that unauthorized modifications on
the speaker system are forbidden due to safety
reasons!
•
If this device will be operated in any way different
to the one described in this manual, the product
may suffer damages and the warranty becomes
void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, etc.
Cleaning and Service
•
Disconnect from mains before cleaning! Never use
solvents or aggressive detergents in order to clean
the device! Rather use a soft and damp cloth.
•
If the speaker system distorts, one of the
loudspeakers may be defective. In this case the
speaker system should not be operated any more
in order to prevent further damage. Please contact
your dealer. If clacking sounds are heard from the
speaker system, screws may have loosened due to
the continuous vibrations. The speaker system
should be checked by a specialist.
•
There are no serviceable parts inside the device
except for the fuse. Maintenance and service
operations are only to be carried out by authorized
dealers! Should you need any spare parts, please
use genuine parts.
•
If the power supply cable of this device becomes
damaged, it has to be replaced by a special power
supply cable available at your dealer.
Intended Use
•
This speaker set is suitable for hi-fi and monitoring
applications in small rooms. It was designed for
indoor use only.

Chat with your Omnitronic ALP-6A manual using AI

Get instant AI answers from your Omnitronic ALP-6A manual

Ask anything about the Omnitronic ALP-6A. Answers come from this manual, with the pages they are based on.

ALP-6A Maintenance Schedule

From time to time
Inspect the device and power cord

Check the device and power cord periodically for damage, crushing, or sharp-edge damage.

Regularly
Check the sound pressure level

Use a sound level meter to ensure the required sound pressure threshold is maintained.

M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend ALP-6A?

Yes No

Frequently Asked Questions

A

The ALP-6A provides stereo RCA (Cinch) inputs and a 3.5 mm stereo jack for connecting MP3 players, computers, mixers and other line-level sources. The passive speaker connects to the active unit via the speaker output terminal; observe correct polarity.

Is this answer helpful?

A

The system delivers 2 x 45 W RMS (2 x 90 W program) with a frequency range of approximately 80 Hz to 20 kHz. Sensitivity is about 89 dB (1 W/1 m). This power and range are suitable for small-room HiFi and monitoring but offer limited deep-bass extension.

Is this answer helpful?

A

Yes. The package includes mounting brackets. Use appropriate screws and anchors for your wall type and ensure the speakers are secured so they cannot fall. Do not cover the active speaker’s cooling fins and allow adequate ventilation.

Is this answer helpful?

A

Keep the unit dry, use the correct mains voltage (230 V/50 Hz), replace fuses only with identical types while the device is unplugged, and disconnect power before cleaning. No user-serviceable parts are inside except the fuse; have authorized dealers perform repairs.

Is this answer helpful?

A

When AUTO ON is selected, the speaker enters standby after about 3.5 minutes without an input signal. The unit wakes automatically when it detects a signal above the threshold (≈5 mV), at which point the LED indicator lights again.

Is this answer helpful?

A

The ALP-6A is intended for indoor HiFi and monitoring in small rooms. Its connectivity and power are not optimized for larger professional live-sound applications; for such uses, look for higher-powered, touring-grade monitors with balanced inputs.

Is this answer helpful?

A

Do not discard the speakers with household waste. Take them to a local recycling facility or contact your retailer/local authorities for environmentally safe disposal. Remove any batteries and dispose of them separately according to local regulations.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact active/passive 2-way set with biamp Class D amplifier for efficient power and space-saving.
  • Simple connectivity: stereo RCA and 3.5 mm jack for quick hookup to common audio sources.
  • Tone controls (bass/treble) and volume knob allow sound tailoring without external EQ.
  • Auto-standby function conserves power and automatically resumes when a signal is present.
  • Lightweight ABS cabinet with metal grille and included mounting brackets for flexible placement.
VS

Disadvantages

  • Frequency response starts at 80 Hz, so deep bass extension is limited compared to larger monitors.
  • Power rating (2x45 W RMS) suits small rooms but may be insufficient for larger venues.
  • No advanced inputs (digital, balanced XLR) — limited for pro audio setups.
  • Only passive second speaker — requires correct wiring and polarity attention during installation.
  • Not designed for outdoor use or exposure to moisture; strictly indoor application.
M: OA-GPT-5-NAN

Product Specification

Principle

2-Way

Tweeter

1x 1"

Woofer

1x 6.50"

Amplification

active

Frequency Range

80Hz-20kHz

Power

45W RMS

Sensitivity

89dB

Dimensions

8.58x11.42x7.36in (WxHxD)

Weight

7.39 lb

M: OA-GPT-54-NAN

Product Description

Omnitronic ALP-6A — Compact Active/Passive Speaker Set

The Omnitronic ALP-6A is a compact 2-way stereo speaker set designed for small-room HiFi and monitoring applications. Supplied as a pair — one active and one passive speaker — the set combines a biamped Class D amplifier in the active cabinet with a lightweight ABS enclosure and metal grille for a balance of performance and portability. With dedicated bass and treble controls, a volume knob, and an auto-standby feature, the ALP-6A is aimed at users who need straightforward, reliable playback for desktop, rehearsal, or small venue use.

Key features and use

The active unit houses a 2 x 45 W RMS (2 x 90 W program) amplifier driving a 6.5" low-frequency driver and a 1" high-frequency tweeter. Frequency response spans roughly 80 Hz–20 kHz with 89 dB sensitivity (1 W/1 m). Inputs include stereo RCA (Cinch) and a 3.5 mm stereo jack for easy connection to mixers, computers, and portable players. A speaker output terminal links to the passive cabinet; correct polarity must be observed during hookup.

AUDIO CONTROL: Separate controls for volume, bass and treble (±12 dB) let you tailor the sound for different rooms and sources. The unit’s auto-on/auto-standby mode preserves energy by switching to standby after no input is detected and returning to operation when signal resumes.

SAFETY & INSTALLATION: The speakers adhere to Protection Class II (double insulated). The package includes a power cord, speaker cable and mounting brackets. Installation notes stress stable mounting, ventilation for the active speaker’s cooling fins, and avoiding exposure to moisture or extreme temperatures. Follow basic electrical safety: use correct mains voltage (230 V/50 Hz), replace fuses only with equivalent types, and disconnect power before cleaning.

MAINTENANCE & ENVIRONMENT: There are no user-serviceable parts inside apart from the fuse; authorized service is recommended for repairs. For end-of-life disposal, follow local recycling regulations and remove batteries for separate disposal if present.

Notes

  • Ideal for small rooms, desktop monitoring, and lightweight portable setups.
  • Not intended for outdoor use or heavy-duty professional touring.
  • Observe polarity when connecting passive speaker to the active unit.
  • Keep cooling fins uncovered and allow adequate ventilation.
  • Replace blown fuses only when the unit is disconnected and with the same fuse type.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly