Manual.ly Logo

Omnitronic ALP-6A Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-5-NAN
page

/ 12

Loading...
e084cb93c4b19703515e0e4bd8176ebb87fb page 8
8
•
EN
2
Safety Instructions
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
HEALTH HAZARD!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
•
Please make sure that there are no obvious
transport damages. Should you notice any
damages, do not take the device into operation and
immediately consult your local dealer.
•
Save the package and all packing materials. In the
event that a fixture must be returned to the factory,
it is important that the fixture be returned in the
original factory box and packing.
Protection Class
•
This device falls under protection class II and
features a protective insulation. The power plug
must only be plugged into a suitable outlet. The
voltage and frequency must exactly be the same
as stated on the device. Wrong voltages or power
outlets can lead to the destruction of the device
and to mortal electrical shock.
Power Cord
•
Always plug in the power plug least. The power
plug must always be inserted without force. Make
sure that the plug is tightly connected with the
outlet.
•
Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Never touch them with wet hands, as this could
lead to mortal electrical shock.
•
Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord. Never
operate next to sources of heat or cold. Disregard
can lead to power cord damages, fire or mortal
electrical shock.
•
The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable
may be damaged which may lead to mortal
damage.
•
Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
•
If extension cords are used, make sure that the
core diameter is sufficient for the required power
consumption of the device. All warnings
concerning the power cords are also valid for
possible extension cords.
•
Always disconnect from the mains, when the
device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out
the plug by tugging the power cord. Otherwise, the
cable or plug can be damaged leading to mortal
electrical shock. If the power plug or the power
switch is not accessible, the device must be
disconnected via the mains.
If the power plug or the device is dusty, the device
must be taken out of operation, disconnected and
then be cleaned with a dry cloth. Dust can reduce
the insulation which may lead to mortal electrical
shock. More severe dirt in and at the device should
only be removed by a specialist.
Foreign Objects
•
There must never be any objects entering into the
device. This is especially valid for metal parts. If
any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out
of operation and disconnected immediately.
Malfunction or short-circuits caused by metal parts
may cause mortal injuries.
Liquids
•
There must never enter any liquid into power
outlets, extension cords or any holes in the housing
of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it
must immediately be disconnected. This is also
valid, if the device was exposed to high humidity.
Also if the device is still running, the device must
be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause
mortal electrical shock.

Chat with your Omnitronic ALP-6A manual using AI

Get instant AI answers from your Omnitronic ALP-6A manual

Ask anything about the Omnitronic ALP-6A. Answers come from this manual, with the pages they are based on.

ALP-6A Maintenance Schedule

From time to time
Inspect the device and power cord

Check the device and power cord periodically for damage, crushing, or sharp-edge damage.

Regularly
Check the sound pressure level

Use a sound level meter to ensure the required sound pressure threshold is maintained.

M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend ALP-6A?

Yes No

Frequently Asked Questions

A

The ALP-6A provides stereo RCA (Cinch) inputs and a 3.5 mm stereo jack for connecting MP3 players, computers, mixers and other line-level sources. The passive speaker connects to the active unit via the speaker output terminal; observe correct polarity.

Is this answer helpful?

A

The system delivers 2 x 45 W RMS (2 x 90 W program) with a frequency range of approximately 80 Hz to 20 kHz. Sensitivity is about 89 dB (1 W/1 m). This power and range are suitable for small-room HiFi and monitoring but offer limited deep-bass extension.

Is this answer helpful?

A

Yes. The package includes mounting brackets. Use appropriate screws and anchors for your wall type and ensure the speakers are secured so they cannot fall. Do not cover the active speaker’s cooling fins and allow adequate ventilation.

Is this answer helpful?

A

Keep the unit dry, use the correct mains voltage (230 V/50 Hz), replace fuses only with identical types while the device is unplugged, and disconnect power before cleaning. No user-serviceable parts are inside except the fuse; have authorized dealers perform repairs.

Is this answer helpful?

A

When AUTO ON is selected, the speaker enters standby after about 3.5 minutes without an input signal. The unit wakes automatically when it detects a signal above the threshold (≈5 mV), at which point the LED indicator lights again.

Is this answer helpful?

A

The ALP-6A is intended for indoor HiFi and monitoring in small rooms. Its connectivity and power are not optimized for larger professional live-sound applications; for such uses, look for higher-powered, touring-grade monitors with balanced inputs.

Is this answer helpful?

A

Do not discard the speakers with household waste. Take them to a local recycling facility or contact your retailer/local authorities for environmentally safe disposal. Remove any batteries and dispose of them separately according to local regulations.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact active/passive 2-way set with biamp Class D amplifier for efficient power and space-saving.
  • Simple connectivity: stereo RCA and 3.5 mm jack for quick hookup to common audio sources.
  • Tone controls (bass/treble) and volume knob allow sound tailoring without external EQ.
  • Auto-standby function conserves power and automatically resumes when a signal is present.
  • Lightweight ABS cabinet with metal grille and included mounting brackets for flexible placement.
VS

Disadvantages

  • Frequency response starts at 80 Hz, so deep bass extension is limited compared to larger monitors.
  • Power rating (2x45 W RMS) suits small rooms but may be insufficient for larger venues.
  • No advanced inputs (digital, balanced XLR) — limited for pro audio setups.
  • Only passive second speaker — requires correct wiring and polarity attention during installation.
  • Not designed for outdoor use or exposure to moisture; strictly indoor application.
M: OA-GPT-5-NAN

Product Specification

Principle

2-Way

Tweeter

1x 1"

Woofer

1x 6.50"

Amplification

active

Frequency Range

80Hz-20kHz

Power

45W RMS

Sensitivity

89dB

Dimensions

8.58x11.42x7.36in (WxHxD)

Weight

7.39 lb

M: OA-GPT-54-NAN

Product Description

Omnitronic ALP-6A — Compact Active/Passive Speaker Set

The Omnitronic ALP-6A is a compact 2-way stereo speaker set designed for small-room HiFi and monitoring applications. Supplied as a pair — one active and one passive speaker — the set combines a biamped Class D amplifier in the active cabinet with a lightweight ABS enclosure and metal grille for a balance of performance and portability. With dedicated bass and treble controls, a volume knob, and an auto-standby feature, the ALP-6A is aimed at users who need straightforward, reliable playback for desktop, rehearsal, or small venue use.

Key features and use

The active unit houses a 2 x 45 W RMS (2 x 90 W program) amplifier driving a 6.5" low-frequency driver and a 1" high-frequency tweeter. Frequency response spans roughly 80 Hz–20 kHz with 89 dB sensitivity (1 W/1 m). Inputs include stereo RCA (Cinch) and a 3.5 mm stereo jack for easy connection to mixers, computers, and portable players. A speaker output terminal links to the passive cabinet; correct polarity must be observed during hookup.

AUDIO CONTROL: Separate controls for volume, bass and treble (±12 dB) let you tailor the sound for different rooms and sources. The unit’s auto-on/auto-standby mode preserves energy by switching to standby after no input is detected and returning to operation when signal resumes.

SAFETY & INSTALLATION: The speakers adhere to Protection Class II (double insulated). The package includes a power cord, speaker cable and mounting brackets. Installation notes stress stable mounting, ventilation for the active speaker’s cooling fins, and avoiding exposure to moisture or extreme temperatures. Follow basic electrical safety: use correct mains voltage (230 V/50 Hz), replace fuses only with equivalent types, and disconnect power before cleaning.

MAINTENANCE & ENVIRONMENT: There are no user-serviceable parts inside apart from the fuse; authorized service is recommended for repairs. For end-of-life disposal, follow local recycling regulations and remove batteries for separate disposal if present.

Notes

  • Ideal for small rooms, desktop monitoring, and lightweight portable setups.
  • Not intended for outdoor use or heavy-duty professional touring.
  • Observe polarity when connecting passive speaker to the active unit.
  • Keep cooling fins uncovered and allow adequate ventilation.
  • Replace blown fuses only when the unit is disconnected and with the same fuse type.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly