Manual.ly Logo

Oase ProMax Garden Automatic 3500 Manual

0.0 · 0 Ratings

PDF manual · 208 Pages

English

M: QW-35-FL
page

/ 208

Loading...
50a0ccc730511cbba1eb7bd7bdda7387c9f6 page f
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
15
INSTALLATION AND CONNECTION
NOTE
For permanent installation of the pump,
use flexible compression-proof hoses to
connect it to the pipe network to reduce
the noise of the pump.
NOTE
If the pump is used as a booster pump,
ensure that the max. internal pressure of
6 bar on the pressure side is not ex-
ceeded.
• The pump pressure is added to the pre-
pressure.
• Example: Pre-pressure = 1 bar, max.
pressure of the pump = 4.5 bar, total
pressure = 5.5 bar.
• Install the pump in a horizontal and sta-
ble position in a dry place.
– For permanent installation of the
pump, ensure that a sufficiently large
collecting basin can be positioned un-
derneath the discharge screw for
emptying the pump.
• If possible, install the pump in a higher
position than the container/reservoir
from which the water is to be pumped. If
this is not possible, a pressure-proof
valve must be fitted between the pump
and the suction hose.
• Only use vacuum-proof pressure hoses
on the pressure and suction side.
NOTE
OASE recommends: Additionally fasten
the suction hose (e.g. by tying it to a
wooden stake) to relieve the weight of
the hose on the pump.
B
• Screw a suction and pressure hose with
25.0 mm internal diameter (1") onto the
connections.
OPERATION
Start-up of the device
It is necessary to fill the pump and expel
the air from the suction line before using.
It can take several minutes to expel air
from the suction line.
How to proceed:
C
1. Unscrew the filter cover. A screwdriver
can be inserted from the side into the re-
cesses of the cover to aid unscrewing.
2. Open the shut-off device in the pressure
line.
3. Pour water into the infill opening of the
pre-filter until it overflows. At the same
time, keep the non-return valve opener
open until the water has expelled any
remaining air from the filter.
4. Screw the filter cover back on.
5. Insert the power plug into the socket.
– The pump is ready for operation.
6. Switch on the pump. (→ Operation)
– The pump starts pumping immedi-
ately. The emerging water still con-
tains some air.
NOTE
If no water is taken in after 5 minutes, the
dry run protection of the pump is acti-
vated.
7. Close the shut-off device of the pres-
sure line as soon as there is no more air
in the emerging water. Air has now been
expelled from the suction line.
Shutting down the pump
NOTE
Rinse out the pump with clean water after
use.
How to proceed:
1. Switch off the pump
2. Disconnect the power plug.

Chat with your Oase ProMax Garden Automatic 3500 manual using AI

Get instant AI answers from your Oase ProMax Garden Automatic 3500 manual

Ask anything about the Oase ProMax Garden Automatic 3500. Answers come from this manual, with the pages they are based on.

ProMax Garden Automatic 3500 Maintenance Schedule

Remind me when maintenance is due
Semiannual
Clean the unit and filter cartridge

Clean the pump at least twice per year. Remove the filter cover, take out the cartridge, and brush it under running water. Rinse all parts with clean water.

Show in the manual (page 19)
Yearly
Prepare for winter storage

If frost is expected, drain the unit as much as possible, clean it thoroughly, check for damage, and store it in a dry, frost-free place.

Show in the manual (page 20)
After every use
Rinse the pump with clean water

After shutting down the pump, rinse it thoroughly with clean water to prevent residue buildup.

Show in the manual (page 15)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ProMax Garden Automatic 3500?

Yes No

Frequently Asked Questions

A

No, this pump is not designed for swimming pools or long-term recirculation. It is intended for intermittent use such as filling containers, draining basins, or irrigation.

Is this answer helpful?

A

If the pump shuts down due to a fault indicated by yellow and red LEDs, press the ON/OFF button for at least 3 seconds but no more than 6 seconds to restart it.

Is this answer helpful?

A

No, the unit is not frost-proof. You must drain all water from the pump and hoses and store it in a dry, frost-free location before winter arrives.

Is this answer helpful?

A

The pump can handle water containing particles up to a maximum size of 2 mm. Larger debris may clog the filter or damage the impeller.

Is this answer helpful?

A

No, do not connect this pump to the domestic water supply. It is not suitable for drinking water or boosting pressure in potable water systems.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intelligent dry run protection with LED status indicators
  • Handles water extraction from wells and cisterns efficiently
  • Simple one-button operation with clear visual feedback
  • Durable construction suitable for regular garden irrigation tasks
  • Prevents overheating through automatic overload protection
VS

Disadvantages

  • Not suitable for continuous long-term pond recirculation
  • Cannot be used with salt water or dirty wastewater
  • Requires manual draining and indoor storage during winter
  • Limited to handling particles no larger than 2 mm
  • Must be installed at least 2 meters away from water bodies
M: QW-35-FL

Product Specification

Power

900W

Flow Rate

925.89 gal/h

Head Height

131.23ft

Suction Height

26.25ft

Pressure

58.02psi

Pressure Connection

1"

Suction Connection

1"

Features

without tank, IPX4

Cable Length

4.92ft

Weight

27.56lbs

M: QW-35-FL

Product Description

Elevate Your Garden with the Oase ProMax Garden Automatic 3500

Gardening requires reliable tools to manage water effectively, and the Oase ProMax Garden Automatic 3500 Electric Home Water Pump stands out as a robust solution for homeowners. This pump is designed specifically for transferring clear water or rainwater from various sources like wells, cisterns, or rain barrels. Whether you need to empty a pond, irrigate your vegetable patch, or fill large containers, this unit delivers consistent performance with its powerful motor.

The device features an intuitive control system centered around a single button equipped with LED status indicators. These lights provide immediate visual feedback on the pump's operation, alerting you to normal running conditions, standby modes, or potential issues like dry running. The built-in sensors actively monitor water flow and pressure, automatically shutting down the unit if it detects insufficient water intake to prevent damage. This intelligent protection system ensures longevity and safety during every use cycle.

Installation is straightforward, provided you follow the guidelines for safe electrical connection and proper hose setup. The pump should be placed in a dry, stable location, ideally higher than the water source to facilitate suction. It handles particles up to 2 mm in size, making it suitable for garden applications where minor debris might be present. However, it is strictly not intended for salt water, dirty wastewater, or drinking water supplies. Always ensure the unit is protected from rain and connected via a residual current device for maximum safety.

Maintenance is minimal but essential. Regular cleaning of the pre-filter prevents clogging and maintains optimal flow rates. The unit is not frost-proof, so it must be drained and stored indoors during winter months to avoid freezing damage. By adhering to these simple care routines, your Oase ProMax pump will remain a dependable asset in your garden toolkit for years to come.

Important Notes

  • Always drain the pump completely before storage to prevent frost damage.
  • Do not exceed the maximum internal pressure of 6 bar when using as a booster.
  • Ensure all extension cords are rated for outdoor use.
M: QW-35-FL

© Copyright 2026 Manual.ly