Manual.ly Logo

Oase ProMax ClearDrain 7000 Manual

0.0 · 0 Ratings

PDF manual · 161 Pages

English

M: QW-35-FL
page

/ 161

Loading...
d82f5e5ceaf2f706954436dee50ff71bd421 page f
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
15
Switching off the unit
• Disconnect the power plug.
– When the pump is switched off, resid-
ual water in the hose may flow back
and out of the pump intake.
NOTE
Do not use the unit for long-term opera-
tion. Otherwise this will impair the operat-
ing life of the unit accordingly.
NOTE
Rinse the pump with clean water after
use.
REMEDY OF FAULTS
Malfunction
Cause
Remedy
Pump does not start.
Power supply interrupted
Check the fuse and electri-
cal plug connections.
Metal contacts soiled
• Clean the metal con-
tacts.
Pump switches off after a
short running period.
Overload protection has
switched the pump off due
to overheating.
• Clean the intake and
pressure hose.
• Allow the pump to cool
down.
Pump does not switch off
Metal contacts soiled
• Clean the metal con-
tacts.
The pump is running but is
not delivering, or the deliv-
ered quantity is insufficient
Pressure hose blocked
• Route the pressure hose
without kinks
• Check the outlet and
clean if necessary
Intake blocked
• Clean the intake
Air in the pressure hose
• Expel the air from the
pressure hose.
If applicable:
Non-return valve incorrectly
fitted in the pressure hose
or clogged
• Correctly fit the non-re-
turn valve.
• Clean the non-return
valve.
Impeller defective or worn
Contact OASE
• The impeller may only
be replaced by the
OASE Service.

Chat with your Oase ProMax ClearDrain 7000 manual using AI

Get instant AI answers from your Oase ProMax ClearDrain 7000 manual

Ask anything about the Oase ProMax ClearDrain 7000. Answers come from this manual, with the pages they are based on.

ProMax ClearDrain 7000 Maintenance Schedule

Remind me when maintenance is due
Semiannual
Clean the pump unit

Clean the unit as required but at least twice per year. Use recommended cleaning agents for limescale and rinse thoroughly with clean water.

Show in the manual (page 16)
Regularly
Clean metal contacts (ProMax ClearDrain 11000/14000)

Regularly clean the metal contacts to ensure the pump switches on and off reliably in automatic mode.

Show in the manual (page 16)
After each use
Rinse the pump with clean water

Rinse the pump with clean water after every use to maintain function and prevent damage.

Show in the manual (page 15)
Annually (before winter)
Store and protect from frost

If minus temperatures are expected, drain the unit, clean it thoroughly, check for damage, and store in a dry, frost-free place.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ProMax ClearDrain 7000?

Yes No

Frequently Asked Questions

A

Yes, the Oase ProMax ClearDrain 7000 is ideal for draining and transferring water from swimming pools. It efficiently handles large volumes of clear or slightly dirty water.

Is this answer helpful?

A

No, this pump is strictly not suitable for pumping drinking water. It is designed for rainwater, clear water, and wastewater only.

Is this answer helpful?

A

To achieve a low residual level of 1 mm, remove the spacer ring in manual mode. For 6 to 8 mm, install the spacer ring and secure it with the retaining ring using the bayonet closure.

Is this answer helpful?

A

The pump can effectively transport dirt and particles with a maximum grain size of 5 mm without blocking the intake.

Is this answer helpful?

A

No, the pump should not be used for long-term continuous operation such as permanent pond recirculation, as this will shorten its lifespan.

Is this answer helpful?

A

Since the unit is not frost-proof, you must drain it completely, clean it thoroughly, and store it in a dry, frost-free location before temperatures drop below freezing.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Automated operation via float switch saves time and effort
  • High flow rate of 7500 liters per hour ensures quick drainage
  • IPX8 rating provides complete waterproof protection
  • Adjustable residual water height allows for near-total draining
  • Handles particles up to 5 mm without clogging easily
VS

Disadvantages

  • Not suitable for long-term continuous circulation like pond filters
  • Cannot be used for drinking water or saltwater applications
  • Impeller replacement requires authorized service center intervention
  • Manual mode carries a risk of dry running if unattended
  • Power cable cannot be replaced by the user if damaged
M: QW-35-FL

Product Specification

Power

375W

Flow rate

1981.42 gph

Head height

22.97 ft

Submersion depth

22.97 ft

Pressure

10.16 psi

Pressure connection

1 1/4"

Features

without tank, IPX8

Cable length

32.81 ft

Weight

12.13 lb

M: QW-35-FL

Product Description

Oase ProMax ClearDrain 7000: The Ultimate Solution for Clear Water Management

The Oase ProMax ClearDrain 7000 Electric Clear Water Submersible Pump is a robust and efficient tool designed for homeowners and gardeners who demand reliability. This submersible pump excels at moving clear water, rainwater, or wastewater containing particles up to 5 mm. Whether you need to drain swimming pools, empty cisterns, or irrigate your garden, this unit delivers consistent performance with minimal effort.

Designed with versatility in mind, the ProMax ClearDrain 7000 features an adjustable handle and a float switch that automates the process. When water levels rise, the pump activates automatically; when levels drop, it shuts off to prevent dry running. For more precise control, the manual mode allows the pump to run continuously until manually switched off. The ability to adjust the residual water height means you can drain tanks almost completely, leaving only a few millimeters of water behind.

Safety is paramount in the design of this device. It includes metal contacts and sensors to monitor water levels accurately, ensuring the pump does not run dry under normal operation. The unit is rated IPX8, making it fully waterproof and suitable for deep immersion. With a maximum flow rate of 7500 liters per hour and a head height of 7 meters, it handles substantial volumes quickly. Always remember to rinse the pump with clean water after use to maintain its longevity and optimal function.

M: QW-35-FL

© Copyright 2026 Manual.ly