Manual.ly Logo

Oase LunAqua Maxi LED Manual

0.0 · 0 Ratings

PDF manual · 118 Pages

English

M: QW-35-FL
page

/ 118

Loading...
cacf1c8b37e400004f8e1da9da302303c9a5 page 9
- EN -
9
- EN -
Translation of the original Operating Instructions
Information about these operating instructions
Welcome to OASE Living Water. You made a good choice with the purchase of this product Lunaqua Maxi LED.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
GB
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an
imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger
, which can lead to death or severe injuries if the appropriate
measures are not taken.
Important information for trouble
-free operation.
Scope of delivery
Fig. A
Lunaqua Maxi
Quantity
Description
Set 1
1
1
LED spot including light bulb and 30° lens
2
1
Ground stake
3
1
Transformer with connection cable
4
1
Fastening set
5
1
10° replacement lens
Intended use
Lunaqua Maxi LED, referred to as "unit", may only be used as specified in the following:
• For use in water fountain systems and ponds.
• For use above and under water.
• Operation under observance of the technical data.
Ensure that the safety transformer is only operated at ambient temperatures of -10 °C to +40 C.
• Install the transformer at a minimum safety distance of 2 m from the water.

Chat with your Oase LunAqua Maxi LED manual using AI

Get instant AI answers from your Oase LunAqua Maxi LED manual

Ask anything about the Oase LunAqua Maxi LED. Answers come from this manual, with the pages they are based on.

LunAqua Maxi LED Maintenance Schedule

As needed
Clean the unit with clear water and soft brush

If necessary, clean the unit with clear water using a soft brush. Ensure no moisture enters the unit. Switch off power before cleaning.

Show in the manual (page 13)
During storage
Clean and inspect for damage before storing

Before storage, clean the unit and check for damage. Store at a dry place inaccessible to children.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend LunAqua Maxi LED?

Yes No

Frequently Asked Questions

A

Yes, the Lunaqua Maxi LED spots are designed for use both above and under water in ponds and fountains. However, ensure the power supply remains outside the water.

Is this answer helpful?

A

No, the transformer and plug connections are only rain and splash-proof. They must be installed at least two meters away from the water and never submerged.

Is this answer helpful?

A

No, the LED light cannot be operated with a dimmer. Connecting it to a dimmable power supply may damage the sensitive electronic components.

Is this answer helpful?

A

If the cable or housing is damaged, the unit cannot be repaired. It must be disposed of safely and replaced with a new unit to ensure safety.

Is this answer helpful?

A

You can swap the standard 30-degree lens for the included 10-degree lens. Ensure the device is powered off before unscrewing the front cap to replace the lens.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Includes three powerful LED spots for comprehensive coverage
  • Versatile lens options with both 30 and 10-degree beams included
  • Safe operation with required transformer distance from water
  • Easy installation with ground stakes and mounting hardware
  • Durable construction suitable for pond and fountain environments
VS

Disadvantages

  • Power cables and connectors are not fully waterproof
  • Cannot be connected to dimmable power supplies
  • Transformer must be kept dry and away from direct water contact
  • LED brightness naturally decreases over long operating hours
  • Units cannot be repaired if cables or housing are damaged
M: QW-35-FL

Product Specification

Type

Garden light, spotlight

Old energy efficiency class of built-in lamp

A++ (A++ to E)

Built-in LEDs

yes

Socket

no

Lamp

LED (built-in), 3W, warm white (2700K), 180lm

Total power consumption

3W

Total luminous flux

180lm

Material

Stainless steel, plastic

Color

stainless steel, black

Design

round

Features

adjustable

Protection class

IP68

Dimensions

2.05x4.61 in (DxH)

M: QW-35-FL

Product Description

Transform Your Garden with the Oase LunAqua Maxi LED Set 3

Enhance the beauty of your outdoor water features with the Oase LunAqua Maxi LED Set 3 Garden Spot. This versatile lighting solution is designed specifically for ponds and fountain systems, offering a safe and effective way to illuminate water surfaces both above and below the line. Whether you are highlighting a koi pond or accentuating a garden stream, this set provides professional-grade illumination that brings your landscape to life after sunset.

The kit includes three high-performance LED spots, each equipped with a standard 30-degree lens for broad coverage. For those seeking a more focused beam, a 10-degree replacement lens is included in the package, allowing you to customize the light spread to suit specific design needs. Each unit comes with a sturdy ground stake for easy installation in soil, ensuring stability against wind and weather. The system operates via a dedicated safety transformer, which must be placed at least two meters away from the water to prevent electrical hazards.

Installation is straightforward, whether you choose to drive the stakes into the ground or mount the fixtures to a wall using the provided fastening hardware. The units are built to withstand outdoor conditions, though it is crucial to remember that the power supply and connectors are only splash-proof, not fully waterproof. Regular maintenance involves simple cleaning with fresh water and a soft brush to remove algae or debris that might dim the light output. Safety is paramount; always disconnect power before reaching into the water or performing any adjustments. This product represents a reliable choice for creating stunning visual effects in any living water environment.

M: QW-35-FL

© Copyright 2026 Manual.ly