Manual.ly Logo

Oase LunAqua Classic LED Manual

0.0 · 0 Ratings

PDF manual · 95 Pages

English

M: QW-35-FL
page

/ 95

Loading...
a30f9d97b5176ccec7e3597e863c6f759c97 page 7
- EN -
7
- EN -
Translation of the original Operating Instructions
WARNING
• This unit can be used by children aged 8  and above and by per-
sons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they are supervised or have been
instructed on how to use the unit in a safe way and they understand
the hazards involved.
• Do not allow children to play with the unit.
• Only allow children to carry out cleaning and user maintenance un-
der supervision.
• Ensure that the unit is fused for a rated fault current of max. 30 mA
by means of a fault current protection device.
• Only connect the unit if the electrical data of the unit and the power
supply correspond. The unit data is to be found on the unit type plate,
on the packaging or in this manual.
• Possible death or severe injury from electrocution! Before reaching
into the water, disconnect all electrical units in the water from the
mains.
• Do not use the unit if electrical cables or housings are damaged.
• A damaged connection cable cannot be replaced. Dispose of the
unit.
Safety information
Correct electrical installation
• Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.
• A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experience, he
or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the
recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regula-
tions.
• For your own safety, please consult a qualified electrician.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
• Install the transformer at a minimum safety distance of 2 m from the water.
• Protect the plug connection from moisture.
• Only connect the unit to a correctly fitted socket.

Chat with your Oase LunAqua Classic LED manual using AI

Get instant AI answers from your Oase LunAqua Classic LED manual

Ask anything about the Oase LunAqua Classic LED. Answers come from this manual, with the pages they are based on.

LunAqua Classic LED Maintenance Schedule

As needed
Clean the device with clear water and a soft brush

If necessary, clean the unit with clear water using a soft brush. Ensure no moisture enters the unit.

When defective
Replace the LED bulb

Unscrew threaded ring, remove glass pane and O-ring, check for damage, replace defective bulb with original OASE part (max 1.3W). Do not touch new bulb with fingers.

When defective
Check and replace sealing rings

If water is inside the spotlight housing, check the sealing rings and replace them if they are defective or damaged.

Show in the manual (page 10)
When broken
Replace cracked glass pane

Immediately replace any glass pane that has cracks to maintain dust and water tightness of the unit.

Show in the manual (page 93)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend LunAqua Classic LED?

Yes No

Frequently Asked Questions

A

No, you must not operate this unit with a dimmer. The device contains sensitive electrical components that will be destroyed if connected to a dimming system.

Is this answer helpful?

A

No, the included power pack and plug connectors are only rain and splash-proof. They must not be placed inside the water and should be positioned at least 2 meters away from the water surface.

Is this answer helpful?

A

Each LED bulb has a maximum power rating of 1.3 watts, making the set highly energy-efficient for garden lighting applications.

Is this answer helpful?

A

Unscrew the threaded ring, remove the glass pane and O-ring, take out the old bulb, and insert a new one using a cloth to avoid touching it directly. Only use original OASE bulbs.

Is this answer helpful?

A

Children aged 8 and older may use the device if supervised or instructed on safe usage. Children must not play with the unit or perform maintenance without adult supervision.

Is this answer helpful?

A

If the connection cable is damaged, it cannot be replaced. You must dispose of the entire unit safely by cutting the cables and using the appropriate return system.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Fully assembled set saves installation time
  • Energy-efficient LED technology with low wattage
  • Available in single or triple spotlight configurations
  • Durable design suitable for both above and underwater use
  • Simple maintenance and bulb replacement process
VS

Disadvantages

  • Cannot be used with dimmer switches without damage
  • Power supply components are not waterproof
  • Requires specific distance (2m) from water for transformer
  • Damaged cables cannot be repaired and require disposal
  • Bulbs must be handled carefully to avoid skin oils
M: QW-35-FL

Product Specification

Type

Garden light, spotlight

Energy efficiency class of built-in lamp old

A++ (A++ to E)

Built-in LEDs

yes

Socket

no

Lamp

LED (built-in), 1.3W, warm white (3000K), 120lm

Total power

1.3W

Total luminous flux

120lm

Material

Plastic

Color

Black

Design

Round

Features

Adjustable

Protection class

IP68

Dimensions

2.95x4.49in (DxH)

M: QW-35-FL

Product Description

Illuminate Your Garden with the Oase LunAqua Classic LED Set

Transform your outdoor space into a stunning evening retreat with the Oase LunAqua Classic LED Set. This versatile lighting solution is designed specifically for water features, making it an ideal choice for garden ponds and fountain installations. Whether you wish to highlight the gentle flow of water or create dramatic underwater effects, this set provides reliable and efficient illumination.

The kit comes fully assembled, saving you time and effort during installation. It includes high-quality LED spotlights that are energy-efficient and long-lasting, consuming a maximum of 1.3 watts per bulb. The set is available in two configurations: Set 1 features a single spotlight perfect for smaller ponds, while Set 3 offers three spotlights to cover larger areas or multiple focal points. Each unit is paired with a dedicated transformer and a three-way distributor, ensuring all lights can be powered from a single source.

Safety is paramount when dealing with electrical equipment near water. The Oase LunAqua Classic LED Set adheres to strict safety standards, requiring connection via a residual current device with a maximum fault current of 30 mA. The transformer must be placed at least two meters away from the water's edge to ensure safe operation. While the LED units themselves are suitable for submersion, the power supply components are only splash-proof and rain-resistant, meaning they should never be submerged.

Installation is straightforward. You can place the foot of the spotlight on the ground or securely screw it onto a solid base or wall. The angle of the light can be adjusted to direct the beam exactly where needed before being fixed in place. Maintenance is equally simple; if the lamp glass becomes dirty, a soft brush and clear water will restore clarity. When replacing bulbs, always use original OASE parts and avoid touching the new bulb with bare fingers to prevent oil damage.

Remember, this device contains sensitive electronics and must never be operated with a dimmer switch, as doing so will destroy the unit. By following the provided guidelines, you ensure years of safe and beautiful lighting for your garden water features.

M: QW-35-FL

© Copyright 2026 Manual.ly