Manual.ly Logo

NVIDIA Mellanox ConnectX-3 Pro Manual

0.0 · 0 Ratings

PDF manual · 66 Pages

English

M: QW-35-FL
page

/ 66

Loading...
59e6dd2f6e8f145372ac1f88b9839d02948c page 2
Document Number: MLNX-15-887
Rev 1.4
Mellanox Technologies
2
Mellanox Technologies
350 Oakmead Parkway Suite 100
Sunnyvale, CA 94085
U.S.A.
www.mellanox.com
Tel: (408) 970-3400
Fax: (408) 970-3403
© Copyright 2017. Mellanox Technologies Ltd. All Rights Reserved.
Mellanox®, Mellanox logo, Accelio®, BridgeX®, CloudX logo, CompustorX®, Connect-IB®, ConnectX®,
CoolBox®, CORE-Direct®, EZchip®, EZchip logo, EZappliance®, EZdesign®, EZdriver®, EZsystem®,
GPUDirect®, InfiniHost®, InfiniBridge®, InfiniScale®, Kotura®, Kotura logo, Mellanox CloudRack®, Mellanox
CloudXMellanox®, Mellanox Federal Systems®, Mellanox HostDirect®, Mellanox Multi-Host®, Mellanox Open
Ethernet®, Mellanox OpenCloud®, Mellanox OpenCloud Logo®, Mellanox PeerDirect®, Mellanox ScalableHPC®,
Mellanox StorageX®, Mellanox TuneX®, Mellanox Connect Accelerate Outperform logo, Mellanox Virtual Modular
Switch®, MetroDX®, MetroX®, MLNX-OS®, NP-1c®, NP-2®, NP-3®, NPS®, Open Ethernet logo, PhyX®,
PlatformX®, PSIPHY® , SiPhy®, StoreX®, SwitchX®, Tilera®, Tilera logo, TestX®, TuneX®, The Generation of
Open Ethernet logo, UFM®, Unbreakable Link®, Virtual Protocol Interconnect®, Voltaire® and Voltaire logo are
registered trademarks of Mellanox Technologies, Ltd.
All other trademarks are property of their respective owners.
For the most updated list of Mellanox trademarks, visit http://www.mellanox.com/page/trademarks
NOTE :
THIS HARDWARE , SOFTWARE OR TEST SUITE PRODUCT ( PRODUCT (S) ) AND ITS RELATED
DOCUMENTATION ARE PROVIDED BY MELLANOX TECHNOLOGIES AS-ISﺴ WITH ALL FAULTS OF ANY
KIND AND SOLELY FOR THE PURPOSE OF AIDING THE CUSTOMER IN TESTING APPLICATIONS THAT
USE THE PRODUCTS IN DESIGNATED SOLUTIONS . THE CUSTOMER 'S MANUFACTURING TEST
ENVIRONMENT HAS NOT MET THE STANDARDS SET BY MELLANOX TECHNOLOGIES TO FULLY
QUALIFY THE PRODUCT (S) AND/OR THE SYSTEM USING IT . THEREFORE , MELLANOX TECHNOLOGIES
CANNOT AND DOES NOT GUARANTEE OR WARRANT THAT THE PRODUCTS WILL OPERATE WITH THE
HIGHEST QUALITY . ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING, BUT NOT LIMITED TO , THE
IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT ARE DISCLAIMED . IN NO EVENT SHALL MELLANOX BE LIABLE TO CUSTOMER OR
ANY THIRD PARTIES FOR ANY DIRECT , INDIRECT, SPECIAL , EXEMPLARY , OR CONSEQUENTIAL
DAMAGES OF ANY KIND (INCLUDING, BUT NOT LIMITED TO , PAYMENT FOR PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE , DATA, OR PROFITS ; OR BUSINESS INTERRUPTION )
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY ,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY FROM THE USE OF THE
PRODUCT (S) AND RELATED DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE .

Chat with your NVIDIA Mellanox ConnectX-3 Pro manual using AI

Get instant AI answers from your NVIDIA Mellanox ConnectX-3 Pro manual

Ask anything about the NVIDIA Mellanox ConnectX-3 Pro. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Mellanox ConnectX-3 Pro?

Yes No

Frequently Asked Questions

A

It supports RHEL, CentOS, Ubuntu, Windows Server, FreeBSD, OpenFabrics Enterprise Distribution, and VMware ESXi.

Is this answer helpful?

A

Yes, it is backward compatible with PCIe 2.0 and 1.1, though it will operate at the lower speed of the slot.

Is this answer helpful?

A

No, SFP+ optical transceiver modules and copper cables must be purchased separately.

Is this answer helpful?

A

Download the MLNX_EN driver package from the Mellanox website and run the install.sh script in the terminal.

Is this answer helpful?

A

Typical power consumption is around 6W with passive cables, with a maximum of approximately 6.7W depending on the model.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports PCIe 3.0 x8 with speeds up to 8GT/s
  • Enables RDMA over Converged Ethernet (RoCE) for low latency
  • Hardware offload for NVGRE and VXLAN overlay networks
  • Compatible with major OS including Linux, Windows, and VMware
  • GPUDirect RDMA support for enhanced GPU performance
VS

Disadvantages

  • Requires specific PCIe x8 slots for full speed operation
  • SFP+ modules and cables sold separately
  • May require driver updates for latest OS versions
  • Not compatible with older PCIe 1.0 or 2.0 x4 slots at full speed
  • Complex firmware update process for some users
M: QW-35-FL

Product Specification

Type

LAN Adapter

Form Factor

1x PCIe Card (interchangeable bracket: full height and low profile bracket included)

Connection

1x PCIe 3.0 x8

Interface

1x SFP+

Transmission

1x SFP+ (1G/10Gb/s)

Power Supply

Power supply only via connection

Chipset

Mellanox ConnectX-3 Pro (LAN Adapter)

Dimensions

5.6x2.1 inches (WxD, without bracket)

Features

VLAN, LACP, VXLAN, NVGRE, RoCE, SR-IOV, iSCSI, iSER, NC-SI, 9.6kB Jumboframes

Manufacturer Warranty

one year

M: QW-35-FL

Product Description

NVIDIA Mellanox ConnectX-3 Pro 10G LAN Adapter Overview

The NVIDIA Mellanox ConnectX-3 Pro is a high-performance Ethernet adapter designed for modern data centers and enterprise environments. Built on the MT27528A integrated circuit, this card delivers exceptional throughput and low latency, making it ideal for High-Performance Computing (HPC) and virtualized infrastructure.

Key Features and Performance

This adapter supports PCIe Gen 3.0 x8 interfaces with speeds up to 8GT/s, ensuring compatibility with existing systems while offering significant bandwidth improvements over previous generations. It features single or dual SFP+ ports capable of 10 Gigabit Ethernet speeds, adhering to IEEE 802.3 standards. The hardware includes advanced offload engines for NVGRE and VXLAN overlay networks, allowing data center operators to decouple network layers without sacrificing performance.

Advanced Capabilities

ConnectX-3 Pro introduces RoCE (RDMA over Converged Ethernet), enabling efficient remote direct memory access over Layer 2 Ethernet. This reduces CPU overhead significantly, freeing up processing power for critical applications. The card also supports GPUDirect RDMA, which allows GPUs to directly read and write host memory, eliminating unnecessary data copies and boosting application performance for AI and machine learning workloads.

Installation and Compatibility

Installation requires a system with an available PCI Express x8 slot. The card comes with both short and tall brackets to fit various chassis types. It supports a wide range of operating systems including Linux distributions like RHEL, CentOS, and Ubuntu, as well as Windows Server and VMware ESXi environments. Drivers are available through the Mellanox website for seamless integration.

Reliability and Management

The adapter includes robust LED indicators for monitoring physical and logical link status. Firmware updates can be performed easily using the Mellanox Firmware Tools (MFT) package. The card ensures reliability with features like Quality of Service (QoS) support and hardware-based I/O virtualization via SR-IOV, providing guaranteed isolation for virtual machines.

Important Notes

  • Ensure proper ESD protection during installation.
  • Verify BIOS updates before installing the adapter.
  • Use approved cables and transceivers for optimal performance.
M: QW-35-FL

© Copyright 2026 Manual.ly