NAD CI 8-120 DSP Manual
PDF manual · 18 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your NAD CI 8-120 DSP manual using AI
Get instant AI answers from your NAD CI 8-120 DSP manual
Ask anything about the NAD CI 8-120 DSP. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend CI 8-120 DSP?
Yes NoFrequently Asked Questions
The amplifier delivers more than 120 watts per channel into 8 ohms with all channels driven. In two-channel drive scenarios, it exceeds 130 watts. Bridged mode capability allows for over 200 watts per channel into 8 ohms.
Is this answer helpful?
Use a standard Ethernet cable to connect the LAN port on the rear panel to your router. Ensure both devices are on the same network and use an IP scanner to find the unit's address based on its MAC ID.
Is this answer helpful?
Yes, the unit features a +12V Trigger input that allows compatible external devices to switch the amplifier from standby to operating mode automatically. This function must be enabled via the rear panel switch.
Is this answer helpful?
The amplifier has thermal protection that activates if the internal temperature exceeds 70 degrees Celsius. It will enter protection mode to prevent damage, indicated by red LED lights on the front panel.
Is this answer helpful?
Yes, the web interface includes a Save Settings feature that exports your current configuration to a file. You can later load these settings back onto the unit or transfer them to another device.
Is this answer helpful?
Absolutely. Bridge mode combines adjacent output channels to drive a single speaker with increased power. This can be enabled or disabled through the Input/Output menu in the web interface.
Is this answer helpful?
The gross dimensions are 483mm wide, 45mm high, and 435mm deep. It is designed to fit standard 19-inch equipment racks and weighs approximately 10 kilograms.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Delivers over 120 watts per channel with low distortion
- Advanced DSP allows for precise audio tuning and room correction
- Web-based interface offers easy configuration and monitoring
- Multiple power modes including ultra-low consumption Eco Standby
- Robust protection circuitry ensures long-term reliability
Disadvantages
- Requires network setup for full feature access
- Fan noise may be audible in very quiet environments at high loads
- Power consumption increases significantly when Always On mode is active
- Bridge mode requires careful wiring configuration
- No built-in streaming capabilities like Wi-Fi or Bluetooth
Product Specification
Channels
8
Power per channel
120W (8 ohm), 135W (4 ohm)
Connections
6x Stereo Line In (RCA), 2x Stereo Line Out (RCA), RJ-45
Power consumption
3W mute, 0.5W standby
Color
black
Dimensions
19.02x1.77x17.13 in (WxDxH)
Weight
16.98 lbs
Product Description
Elevate Your Audio Experience with the NAD CI 8-120 DSP
The NAD CI 8-120 DSP represents a pinnacle of multi-channel amplification technology designed for high-end custom installations. This eight-channel powerhouse delivers robust performance, ensuring that every corner of your home or commercial space is filled with crystal-clear audio. With continuous output power exceeding 120 watts per channel into 8 ohms, this unit provides the headroom necessary for dynamic and immersive soundscapes.
Designed for flexibility, the amplifier features advanced Digital Signal Processing capabilities accessible through an intuitive web-based user interface. Users can configure input and output assignments, adjust gain levels, and apply precise equalization presets to tailor the audio response to their specific room acoustics. The inclusion of Global A and B inputs allows for seamless integration with external preamplifiers or processors, offering priority switching capabilities for complex system setups.
Energy efficiency is a core component of the design, featuring multiple power modes including Eco Mode which reduces consumption to less than 0.5 watts in standby. The unit also supports remote triggering via +12V signals, enabling automated control within smart home ecosystems. Robust protection circuits safeguard against overcurrent, DC errors, and overheating, ensuring long-term reliability even under demanding conditions.
Installation is streamlined with detachable terminal blocks for speaker connections and comprehensive safety guidelines regarding ventilation and placement. Whether configured for stereo bridging or full multi-zone distribution, the NAD CI 8-120 DSP stands as a versatile solution for audiophiles seeking precision and power in a compact rack-mountable chassis.
Search for 67,706 Manuals online
Type-in Brand or Model