Manual.ly Logo

Monacor PA-806DAP Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: QW-35-FL
page

/ 16

Loading...
a42baf5c1640a9c5646fa19242bb003d5673 page a
10
English
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Español
Español Página
Nederlands
Nederlands Pagina
Polski
Polski Strona
PA Mixing Amplifier
These instructions are intended for installers of
PA systems and for users without any specific
technical knowledge (chapter 4). Please read
the instructions carefully prior to installation and
keep them for later reference.
1 Applications
This amplifier with a power rating of 120 W
is specially designed for PA systems. Either
use 100 V or 70 V speakers or low-impedance
speakers (minimum impedance: 4 Ω). Apart from
mains operation, it also allows 24 V operation for
mobile applications.
For reproducing speech and music, up to
3microphones and up to 4 other audio sources
can be connected. The connection TEL INPUT is
available for important (emergency) announce-
ments. In addition, a remotely controllable music
module with Bluetooth receiver, DAB+/ FM radio
and audio player for micro SD memory cards / USB
flash drives* is integrated.
*
Due to the large number of storage device manufac-
turers and device drivers, it cannot be guaranteed that
all storage media are compatible with the audio player.
2 Safety Notes
This product corresponds to all relevant directives
of the EU and is therefore marked with .
WARNING
This product uses dangerous
mains voltage. Leave servicing to
skilled personnel only and do not
insert anything into the air vents.
Risk of electric shock!
During operation, there is a hazard of contact
with a dangerous voltage of up to 100 V at the
terminals SPEAKER OUTPUT. Always put the
protective caps on the terminals when oper-
ating the product.
•
The product is suitable for indoor use only.
Protect it against dripping water, splash water
and high air humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the product.
•
The heat generated inside the product must
be dissipated by air circulation. Never cover
the air vents of the housing.
•
Do not use the product and immediately dis-
connect it from the power supply
1. if the unit or the mains cable is visibly dam-
aged,
2.
if a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3. if malfunctions occur.
In any case the product must be repaired by
skilled personnel.
•
Never pull the mains cable to disconnect the
mains plug from the mains socket, always
seize the plug.
•
For cleaning the product only use a dry, soft
cloth; never use water or chemicals.
•
No guarantee claims for the product and no
liability for any resulting personal damage or
material damage will be accepted if the prod-
uct is not correctly used or if it is not expertly
repaired.
If the product is to be put out of opera-
tion definitely, dispose of the product in
accordance with local regulations
3 Installation
Set up the amplifier on a flat, horizontal surface
so that air will be able to flow freely through the
air vents on the sides and on the rear to ensure
sufficient cooling. Always switch off the ampli-
fier before making or changing any connec-
tions. After connecting, put the protective
caps on the screw terminals to protect you
against any accidental contact.
3.1 Inputs
1)
To connect a microphone, use the jack CH 1,
CH 2 or CH 3. The input CH 1 or TEL INPUT
has highest priority (selectable with DIP switch
No.4), i. e. when a signal is available at one
of these two inputs, all other channels will be
muted. Set the DIP switches SELECT to the
required positions:
English
English Page

Chat with your Monacor PA-806DAP manual using AI

Get instant AI answers from your Monacor PA-806DAP manual

Ask anything about the Monacor PA-806DAP. Answers come from this manual, with the pages they are based on.

PA-806DAP Maintenance Schedule

As needed
Clean the product with a dry, soft cloth

For cleaning the product only use a dry, soft cloth; never use water or chemicals.

Show in the manual (page 10)
When not used for long periods
Remove battery from remote control

If the remote control is not used for a longer period of time, remove the battery as a precaution against leakage damage.

Show in the manual (page 12)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PA-806DAP?

Yes No

Frequently Asked Questions

A

It supports both 230-volt AC operation for mains power and 24-volt DC input suitable for mobile applications or backup power sources.

Is this answer helpful?

A

Yes, it has integrated Bluetooth 4.2 receiver to stream music from smartphones and tablets wirelessly to the speakers.

Is this answer helpful?

A

You can connect up to three microphones. The input priority settings allow you to choose which microphone channel takes precedence.

Is this answer helpful?

A

Yes, the telephone input prioritizes emergency announcements and mutes all other channels when active for safety purposes.

Is this answer helpful?

A

It supports speakers ranging from 4 to 16 ohms as well as 70V and 100V constant voltage lines for commercial installations.

Is this answer helpful?

A

Use a dry soft cloth. Never use water or chemicals on the housing to prevent electrical damage or safety hazards.

Is this answer helpful?

A

Yes, the built-in player reads MP3 and WAV files from Micro SD cards or USB flash drives automatically upon startup.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • 120-Watt power output handles large speaker loads for extensive coverage areas effectively
  • Dual voltage support allows 230V AC or 24V DC input compatibility for flexible installation
  • Integrated Bluetooth and DAB Plus radio for modern media access without extra hardware
  • Priority input for emergency telephone calls overrides all other channels during critical alerts
  • Infrared remote control provides convenient operation of the music module and functions
VS

Disadvantages

  • Phantom power limited to CH 1 only restricts mic choices for balanced setups
  • Overload protection cuts power if impedance is wrong requiring manual reset
  • Signal interruption occurs if only one insertion jack is used for processing gear
  • Stereo signals are converted to mono by the amplifier which may reduce fidelity
  • Compatible storage media cannot be guaranteed for all manufacturers or drivers
M: QW-35-FL

Product Specification

Type

Zone Mixer

Channels

1

Format

19" Rack (3HE)

Features

USB

M: QW-35-FL

Product Description

Monacor PA DAP Experience

The Monacor PA-812DAP stands out as a versatile mixing amplifier designed for professionals and specialists. Whether you are installing a public address system or managing audio for events, this device offers robust performance. It integrates seamlessly into existing setups while providing modern connectivity options that enhance user experience and functionality.

Versatile Audio Capabilities

One of the standout features is the ability to handle multiple audio sources simultaneously. You can connect up to three microphones for clear voice transmission with phantom power support on the primary channel. Additionally, four other audio sources can be mixed in, ranging from mobile devices playing Bluetooth tracks to digital radio frequencies and satellite options available. The built-in music module simplifies media playback significantly. Users appreciate the support for Micro SD memory cards and USB storage devices, allowing easy access to playlists without additional hardware. This capability ensures that background music or announcements are always ready for listeners throughout the venue reliably.

Flexible Power and Installation

This unit is not limited to standard wall power. It supports 230-volt operation for permanent installations. The power consumption is 250 VA for AC input. For mobile scenarios, the 24-volt DC input option ensures reliability where grid power is unavailable. This flexibility makes it suitable for both indoor commercial spaces and mobile applications. Safety is paramount during setup. Users must ensure proper ventilation around the device to prevent overheating. Protective caps should remain on terminals when not in use to avoid accidental contact with electrical components. Proper grounding ensures consistent performance over time.

Safety and Compliance

Handling high voltage requires caution. The unit carries the CE mark, indicating compliance with European directives during manufacturing and assembly. Always follow the guidelines regarding moisture and temperature. Operating the unit within the specified range of 0 to 40 degrees Celsius ensures longevity and stable performance. The integrated protection circuitry monitors load conditions to prevent damage during high demand periods. If the protection LED lights up, the system has detected a fault or overload condition requiring immediate attention. Ignoring warnings can result in equipment failure or safety hazards. Regular maintenance checks are recommended to ensure long-term reliability.

Connectivity and Control

The interface includes an infrared remote control for convenient operation of the music module. Bass and treble controls allow for precise sound shaping to suit the environment. Emergency announcements can be prioritized using the telephone input, ensuring critical messages cut through music. The speaker outputs support both high voltage lines and low impedance speakers. Detailed technical specifications help technicians configure the system correctly. Referencing the Monacor PA DAP Manual helps optimize installation procedures. Bluetooth pairing uses a standard PIN for secure access and easy connection setup.

M: QW-35-FL

© Copyright 2026 Manual.ly