Manual.ly Logo

Milwaukee M18 HCCT-201C Manual

0.0 · 0 Ratings

PDF manual · 161 Pages

English

M: QW-35-FL
page

/ 161

Loading...
ca346e30573e7f37aad7d72b54636773754e page 17
Deutsch
2020
GB
English
Jammed Blades
Dirt and debris can cause the blades to become jammed together
after a cut
• Press and hold the hydraulic release button to ensure the tool
has reset.
• Remove the battery pack.
• Follow the picture description to open the cutting bars
• Clean any dirt and debris from the blades before starting another
cut.
Cutting Tips
• Do not attempt to make angled cuts as it will damage the device
and cutting blades.
• Cut clean material to extend the cutting blade life. Wipe dirt and
debris from material and cutting blades before beginning the cut.
MAINTENANCE
Remove the battery pack before starting any adjustment, cleaning
and maintenance work on the device.
Never open the device, removable battery or charger.
Check the device for any problems such as noise or jamming of
moving parts that could be aecting the device.
Check the device, jaws and crimping dies and cutting blades for
cracks and other signs of wear before each use.
Clean and grease the devices when you have nished work.
Clean and grease the drive rolls, the locking boldt and jaws.
Check that the jaws can move freely.
Replace the crimping dies and cutting blades when they become
chipped or damaged.
Check that the cutting edges are sharp and replace worn cutting
blades.
Always replace crimping dies and cutting blades as a set.
The ventilation slots of the device must be kept clear at all times.
To avoid injury and damage, never immerse the device, removable
battery or charger in liquid or allow liquid to penetrate them.
Further service and repair work may only be carried out by authori-
sed specialist workshops.
The device contains hydraulic uid. Hydraulic uids pose a hazard
to groundwater. Uncontrolled draining or improper disposal is
punishable by law.
The next service deadline is indicated by LED on the device.
This service must be performed at least every 2 years or after
30,000 crimping operations or at the latest when the LED display
indicates that a service is due.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on the
label and order the drawing at your local service agents or directly
at: Techtronic Industries GmbH, Max-Eyth-Straße10, 71364Win-
nenden, Germany.
ONEKEY™
To learn more about the ONE-KEY functionality of this device,
please refer to the Quick Start guide included with this product or
go to http://www.milwaukeetool.com/one-key
To download the ONE-KEY app, visit the App Store or Google Play
from your smart device.
We considered the result to be within our minimum acceptable per-
formance level according to EN 301 489-1/ EN 301 489-17. And we
will give the operation guidance to the customer in user manual.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.Temperatures in excess of 50°C (122°F) reduce
the performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition Every six
months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or
by burning them. Milwaukee Distributors oer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it o immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legisla-
tion requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
The user can transport the batteries by road without further
requirements.
Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries:
Ensure that battery contact terminals are protected and insulated
to prevent short circuit. Ensure that battery pack is secured against
movement within packaging. Do not transport batteries that are
cracked or leak. Check with forwarding company for further advice

Chat with your Milwaukee M18 HCCT-201C manual using AI

Get instant AI answers from your Milwaukee M18 HCCT-201C manual

Ask anything about the Milwaukee M18 HCCT-201C. Answers come from this manual, with the pages they are based on.

M18 HCCT-201C Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Recharge stored battery packs

If storage exceeds 30 days, recharge the battery pack every six months while stored at 30-50% charge.

Show in the manual (page 23)
Every 2 years or 30k crimps
Perform preventative service

Service must be performed at least every 2 years or after 30,000 crimping operations, or when the LED indicates.

Show in the manual (page 23)
Before each use
Inspect tool, jaws and dies for wear

Check the device, jaws, crimping dies and cutting blades for cracks and other signs of wear before each use.

Show in the manual (page 23)
After work
Clean and grease drive rolls, bolts and jaws

When finished working, clean and grease the drive rolls, locking bolts and jaws. Check that jaws move freely.

Show in the manual (page 23)
As needed
Replace damaged or worn dies and blades

Replace crimping dies and cutting blades when chipped or damaged. Always replace them as a set.

Show in the manual (page 23)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend M18 HCCT-201C?

Yes No

Frequently Asked Questions

A

The Milwaukee M18 HCCT-201C can crimp copper conductors with a maximum cross-section of 300 mm² using the appropriate dedicated dies.

Is this answer helpful?

A

A solid green LED light indicates the tool reached full crimping pressure and completed the operation successfully.

Is this answer helpful?

A

No, the device is not insulated. You must disconnect the power supply and verify the cable is dead before attempting any cuts.

Is this answer helpful?

A

Service is required every two years or after 30,000 crimping operations, whichever comes first, indicated by a flashing red and green LED.

Is this answer helpful?

A

The standard kit includes the tool, a 2.0 Ah battery, and a case, but the charger is typically sold separately unless specified in a bundle.

Is this answer helpful?

A

Always wear safety goggles, protective gloves, and hearing protection. Avoid loose clothing and keep hands away from moving parts.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • ONE-KEY technology for digital tracking and customization
  • High nominal force of 53 kN for large conductors
  • Clear LED status indicators for operation feedback
  • Includes 2.0 Ah battery and carrying case
  • Hydraulic release button prevents jaw jamming
VS

Disadvantages

  • Tool is not insulated and cannot cut live wires
  • Requires regular maintenance every 30,000 crimps
  • Weight varies between 3.7 kg and 4.3 kg depending on jaws
  • Limited cutting range compared to manual cutters for very thick cables
  • Battery life may be short with frequent heavy crimping tasks
M: QW-35-FL

Product Specification

Battery

18V, 2.0Ah, Li-Ion

Handle

Plastic

Features

Softgrip

Package Contents

Case, Charger, Battery

M: QW-35-FL

Product Description

Milwaukee M18 HCCT-201C Battery Crimping Pliers Review

The Milwaukee M18 HCCT-201C is a powerful hydraulic crimping and cutting tool designed for professional electricians who demand precision and speed. This kit includes the M18 battery crimping pliers, a durable carrying case, and a 2.0 Ah battery, making it ready for immediate use on any job site. The ONE-KEY technology integrated into this device allows users to customize settings, track usage data, and manage tools via a smartphone app, ensuring optimal performance and accountability.

Designed for heavy-duty applications, this tool features a nominal force of 53 kN, capable of compressing copper conductors up to 300 mm² and aluminum up to 150 mm². The hydraulic system ensures consistent pressure, while the LED indicators provide clear feedback: solid green confirms a successful crimp, solid red indicates insufficient pressure, and flashing red signals an incomplete operation. The device also tracks service intervals, alerting users when maintenance is due after 30,000 crimps.

Beyond crimping, the HCCT-201C serves as a robust cable cutter. It can cleanly cut insulated copper or aluminum cables up to 35 mm in diameter. Safety is paramount; the tool is not insulated, so operators must ensure all power sources are disconnected before cutting live circuits. The ergonomic handle with an insulated gripping surface provides comfort during extended use, reducing operator fatigue.

Maintenance is straightforward but critical. Users should regularly clean the jaws and lubricate the moving parts to prevent jamming. The device contains hydraulic fluid, which requires proper disposal according to environmental regulations. Service intervals are indicated by the LED display, prompting inspection every two years or after significant usage. With its compact design and high power output, the Milwaukee M18 HCCT-201C stands out as an essential addition to any electrical toolkit.

Notes

  • Always check battery capacity (minimum 33%) before starting work.
  • Do not attempt angled cuts as they may damage the blades.
  • Store batteries at temperatures below 27°C for long-term storage.
M: QW-35-FL

© Copyright 2026 Manual.ly