Manual.ly Logo

Milwaukee M18 HCCT-201C Manual

0.0 · 0 Ratings

PDF manual · 161 Pages

English

M: QW-35-FL
page

/ 161

Loading...
ca346e30573e7f37aad7d72b54636773754e page 14
Deutsch
1717
GB
English
TECHNICAL DATA
Crimping- and Cutting Tool
M18 HCCT
Production code 4675 37 02...
... 000001-999999
Frequency band 2402-2480 MHz
Radio-frequency power 1.8 dBm
Battery voltage 18 V
Nominal force 53 kN
Compression range : Diameter max.
Copper
Aluminium
300 mm²
150 mm²
Cutting range depends on material
Copper- / Aluminium-Cable max. 35 mm
Other materials and their diameter are depending on the
specic jaws.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah…9,0Ah)
with press jaws
with cutting jaws
3,7 kg… 4,3 kg
3,7 kg… 4,3 kg
Deviating weights depend on the specic jaws.
Recommended Ambient Operating
Temperature
-18°C ... +50°C
Recommended battery types M18B...
Recommended charger M12-18...
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 74,6 dB (A)
Sound power level (Uncertainty K=3dB(A)) 85,6 dB (A)
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
h
0,77 m/s
2
Uncertainty K= 1,5 m/s
2
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for dierent
applications, with dierent accessories or poorly maintained, the
vibration emission may dier. This may signicantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signicantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
9
1
8
2
4 5
10
6
7
3
11
11
12
13
Device description
1
Hydraulic release button
2
Locking bolts
3
Die release tabs
4
Crimping jaws
5
Trigger
6
ONE KEY indicator
7
LED
8
Hanger
9
LED /Crimping indicator
10
Battery
11
Handle
Insulated gripping surface
12
Cutting blades
13
Cutting jaws
LED indicator Denition
Solid Green
Tool completed the operation and reached
full crimping pressure.
Solid Red
Tool completed the operation but did NOT
reach full crimping pressure.
Flashing Red
Tool did NOT complete the operation.
Flashing Red / Green
(after Solid Green or
Solid Red)
Tool has reached its service interval (30000
crimps). Red/Green ashing will begin after
the solid Red or Green indicator for the
operation is displayed.
MILWAUKEE recommends that the device
be inspected and preventative maintenance
completed.

Chat with your Milwaukee M18 HCCT-201C manual using AI

Get instant AI answers from your Milwaukee M18 HCCT-201C manual

Ask anything about the Milwaukee M18 HCCT-201C. Answers come from this manual, with the pages they are based on.

M18 HCCT-201C Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Recharge stored battery packs

If storage exceeds 30 days, recharge the battery pack every six months while stored at 30-50% charge.

Show in the manual (page 23)
Every 2 years or 30k crimps
Perform preventative service

Service must be performed at least every 2 years or after 30,000 crimping operations, or when the LED indicates.

Show in the manual (page 23)
Before each use
Inspect tool, jaws and dies for wear

Check the device, jaws, crimping dies and cutting blades for cracks and other signs of wear before each use.

Show in the manual (page 23)
After work
Clean and grease drive rolls, bolts and jaws

When finished working, clean and grease the drive rolls, locking bolts and jaws. Check that jaws move freely.

Show in the manual (page 23)
As needed
Replace damaged or worn dies and blades

Replace crimping dies and cutting blades when chipped or damaged. Always replace them as a set.

Show in the manual (page 23)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend M18 HCCT-201C?

Yes No

Frequently Asked Questions

A

The Milwaukee M18 HCCT-201C can crimp copper conductors with a maximum cross-section of 300 mm² using the appropriate dedicated dies.

Is this answer helpful?

A

A solid green LED light indicates the tool reached full crimping pressure and completed the operation successfully.

Is this answer helpful?

A

No, the device is not insulated. You must disconnect the power supply and verify the cable is dead before attempting any cuts.

Is this answer helpful?

A

Service is required every two years or after 30,000 crimping operations, whichever comes first, indicated by a flashing red and green LED.

Is this answer helpful?

A

The standard kit includes the tool, a 2.0 Ah battery, and a case, but the charger is typically sold separately unless specified in a bundle.

Is this answer helpful?

A

Always wear safety goggles, protective gloves, and hearing protection. Avoid loose clothing and keep hands away from moving parts.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • ONE-KEY technology for digital tracking and customization
  • High nominal force of 53 kN for large conductors
  • Clear LED status indicators for operation feedback
  • Includes 2.0 Ah battery and carrying case
  • Hydraulic release button prevents jaw jamming
VS

Disadvantages

  • Tool is not insulated and cannot cut live wires
  • Requires regular maintenance every 30,000 crimps
  • Weight varies between 3.7 kg and 4.3 kg depending on jaws
  • Limited cutting range compared to manual cutters for very thick cables
  • Battery life may be short with frequent heavy crimping tasks
M: QW-35-FL

Product Specification

Battery

18V, 2.0Ah, Li-Ion

Handle

Plastic

Features

Softgrip

Package Contents

Case, Charger, Battery

M: QW-35-FL

Product Description

Milwaukee M18 HCCT-201C Battery Crimping Pliers Review

The Milwaukee M18 HCCT-201C is a powerful hydraulic crimping and cutting tool designed for professional electricians who demand precision and speed. This kit includes the M18 battery crimping pliers, a durable carrying case, and a 2.0 Ah battery, making it ready for immediate use on any job site. The ONE-KEY technology integrated into this device allows users to customize settings, track usage data, and manage tools via a smartphone app, ensuring optimal performance and accountability.

Designed for heavy-duty applications, this tool features a nominal force of 53 kN, capable of compressing copper conductors up to 300 mm² and aluminum up to 150 mm². The hydraulic system ensures consistent pressure, while the LED indicators provide clear feedback: solid green confirms a successful crimp, solid red indicates insufficient pressure, and flashing red signals an incomplete operation. The device also tracks service intervals, alerting users when maintenance is due after 30,000 crimps.

Beyond crimping, the HCCT-201C serves as a robust cable cutter. It can cleanly cut insulated copper or aluminum cables up to 35 mm in diameter. Safety is paramount; the tool is not insulated, so operators must ensure all power sources are disconnected before cutting live circuits. The ergonomic handle with an insulated gripping surface provides comfort during extended use, reducing operator fatigue.

Maintenance is straightforward but critical. Users should regularly clean the jaws and lubricate the moving parts to prevent jamming. The device contains hydraulic fluid, which requires proper disposal according to environmental regulations. Service intervals are indicated by the LED display, prompting inspection every two years or after significant usage. With its compact design and high power output, the Milwaukee M18 HCCT-201C stands out as an essential addition to any electrical toolkit.

Notes

  • Always check battery capacity (minimum 33%) before starting work.
  • Do not attempt angled cuts as they may damage the blades.
  • Store batteries at temperatures below 27°C for long-term storage.
M: QW-35-FL

© Copyright 2026 Manual.ly