Manual.ly Logo

Mesto RS125 3552 Manual

0.0 · 0 Ratings

PDF manual · 133 Pages

English

M: QW-35-FL
page

/ 133

Loading...
ee7b1621d808e91656c4ceaa72eeb3a9243c page e
14 15
for purchasing your new backpack spraying device. Thank you for the trust you have
shown in our brand.
Your satisfaction with our products and services is very important to us.
Please contact us if your expectations are not met.
You will nd our address on the title page of these instructions for use.
The backpack spraying device is designed for the spraying of plant protection products,
including weed killers in the stipulated concentrations, as well as cleaning agents, disinfec-
tants and construction chemicals. The spray product manufacturer has to approve that they
can be applied with spraying devices. Nitric acid, acetic acid and propionic acid must only
be used in a concentration of up to 10%, phosphoric acid and sulfuric acid in a concentra-
tion of up to 30%, and potassium hydroxide solution and caustic soda in a concentration of
up to 20%.
Follow the instructions of the spray product manufacturers before each application. The
backpack spraying device may be used outdoors or in well ventilated rooms only.
Have the salesperson or an expert show you how to operate the device if you are working
with it for the rst time.
Welcome and congratulations
Usage
GB IRL AUS USA NZ CDN IND
At the time of manufacture, there are no known harmful e󰀨ects to the device caused by plant
protection products approved by the Federal O󰀩ce of Consumer Protection and Food Safety.
Not suitable for
• inammable liquids
• corrosive substances (certain disinfecting and impregnating agents, acids and bases)
• Liquids containing ammonia
• liquids at temperatures above 40 °C (104° F)
• solvents and liquids containing solvents
• viscous or sticky liquids or liquids that form residues (dyes, greases)
• use in applications for foodstu󰀨s.
Under no circumstances should you use
• external pressure sources without original compressed air valve
• for aming
• for storing and holding liquids
• as an eyewash.
You should only use other products if harmful e󰀨ects on the device and endangerment of
people and the environment can be excluded. Upon request, we will provide you with a list
of active ingredients used in the spraying device.
Make certain to read the instructions for use before using the device!
Keep the instructions for use in a safe place where they can be easily found.
Particular safety measures are required when working with the device.
Improper use may result in dangerous injuries and environmental damage.
7393400_0618_ RS12_-RS18_16spr.indd 14 08.06.2018 11:04:54

Chat with your Mesto RS125 3552 manual using AI

Get instant AI answers from your Mesto RS125 3552 manual

Ask anything about the Mesto RS125 3552. Answers come from this manual, with the pages they are based on.

RS125 3552 Maintenance Schedule

Remind me when maintenance is due
Every 2 years
External inspection by expert

Unless local laws specify otherwise, have an expert perform an external test of the device every 2 years.

Show in the manual (page 18)
Every 5 years
Internal inspection by expert

Unless local laws specify otherwise, have an expert perform an internal test of the device every 5 years.

Show in the manual (page 18)
After every use
Rinse tank and wipe device

Activate shut-off valve to depressurize. Dilute remaining liquid twice with 0.5L water each time and spray. Wipe device with a moist cloth.

Show in the manual (page 18)
Every 5 fillings
Pump device completely empty

To prevent the pressure vessel from filling with liquid, pump the device completely empty at least after every fifth filling.

Show in the manual (page 17)
Every 50 uses or Yearly
Grease diaphragm

Perform this maintenance after 50 uses, upon malfunction, or at least once a year (preferably after winter). Grease the diaphragm [24].

Show in the manual (page 18)
Every 50 uses or Yearly
Oil pump rod

Perform this maintenance after 50 uses, upon malfunction, or at least once a year. Oil the pump rod [33].

Show in the manual (page 18)
Every 50 uses or Yearly
Grease shaft bearings

Perform this maintenance after 50 uses, upon malfunction, or at least once a year. Grease the bearing points on the shaft [16].

Show in the manual (page 18)
Every 50 uses or Yearly
Clean nozzle and insert

Perform this maintenance after 50 uses, upon malfunction, or at least once a year. Clean the nozzle [41] and insert [40] under running water, using a brush if necessary.

Show in the manual (page 18)
Every 50 uses or Yearly
Clean filter

Perform this maintenance after 50 uses, upon malfunction, or at least once a year. Clean the filter [38] under running water.

Show in the manual (page 18)
Every 10 years
Strength test by expert

Unless local laws specify otherwise, have an expert perform a strength test of the device every 10 years.

Show in the manual (page 18)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend RS125 3552?

Yes No

Frequently Asked Questions

A

You can use plant protection products, cleaning agents, and disinfectants approved for sprayers. Avoid flammable liquids, corrosive acids above 10%, and ammonia-based fluids.

Is this answer helpful?

A

Hold the spray wand upward during the first spray and operate the shut-off valve until no air-mixed liquid comes out. Ensure the nozzle insert is clean and properly seated.

Is this answer helpful?

A

No, never leave liquid in the device. Always drain and rinse the tank after use to prevent corrosion and damage to seals.

Is this answer helpful?

A

The device must not be exposed to temperatures above 40 degrees Celsius. Do not leave it in direct sunlight or near heat sources.

Is this answer helpful?

A

Perform basic maintenance after every 50 uses or at least once a year. Grease the diaphragm, oil the pump rod, and clean the filter regularly.

Is this answer helpful?

A

No, the warranty covers material and processing errors but excludes wearing parts like O-rings, diaphragms, and seals damaged by normal use.

Is this answer helpful?

A

Check if the diaphragm is defective or if foreign objects are blocking the valves. Clean the intake and pressure valves or replace the diaphragm if necessary.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable polypropylene tank resistant to corrosion
  • Ergonomic design with comfortable back cushion
  • Adjustable pump handle for left or right-handed use
  • Maximum pressure of 6 bar ensures efficient spraying
  • Clear troubleshooting guide included in manual
VS

Disadvantages

  • Not suitable for viscous liquids like paints or fats
  • Requires manual pumping which can be tiring over time
  • Cannot be used with liquids above 40 degrees Celsius
  • Residual quantity remains in the tank after emptying
  • Regular maintenance required to prevent leaks
M: QW-35-FL

Product Specification

Tank Volume

3.17 gal

Operating Pressure

86.96 psi

Hose Length

4.92 ft

Features

Shoulder Strap

Nozzle

Fog Nozzle

M: QW-35-FL

Product Description

The Mesto 3552 RS125 Back Sprayer Manual: A Comprehensive Guide for Efficient Gardening

The Mesto 3552 RS125 Back Sprayer Manual serves as an essential companion for anyone looking to maintain a pristine garden or manage agricultural tasks with precision. This manual is not just a collection of instructions; it is a roadmap to mastering the operation, safety, and maintenance of one of the most reliable sprayers in the market. Designed by Mesto Spritzenfabrik Ernst Stockburger GmbH, the RS125 model stands out for its durability and user-friendly design, making it ideal for applying plant protection products, cleaning agents, and disinfectants.

Understanding the Device

The RS125 is built with a polypropylene tank that holds up to 12 liters of liquid. Its lightweight construction ensures comfort during extended use, while the ergonomic carrying straps and back cushion provide support. The device operates at a maximum pressure of 6 bar, ensuring a fine mist for effective coverage without waste. Safety is paramount, with specific warnings against using the sprayer with flammable liquids, corrosive substances beyond recommended concentrations, or liquids exceeding 40 degrees Celsius.

Assembly and Operation

Setting up the sprayer is straightforward. The manual guides users through attaching the carrying strap, securing the pump lever, and connecting the hose and spray wand. A key feature is the adjustable pump handle, which can be mounted on either side to suit the user's preference. Once assembled, the device requires careful filling. Users should fill the tank one-third with water, add the chemical agent, and then top up with water to prevent splashing and ensure proper mixing.

Maintenance and Care

Longevity depends on proper care. The manual emphasizes regular maintenance, such as greasing the diaphragm and oiling the pump rod after every 50 uses or at least once a year. Cleaning the nozzle and filter after each use prevents clogging and ensures consistent spray patterns. Storing the device with the cap removed in a dry, frost-free environment helps preserve its integrity.

Troubleshooting

Common issues like lack of pressure or dripping nozzles are addressed with clear troubleshooting steps. Whether replacing a defective valve disc or lubricating moving parts, the guide empowers users to resolve problems quickly, minimizing downtime.

Important Notes

  • Always wear protective gear when handling chemicals.
  • Never leave liquid in the tank overnight.
  • Use only original Mesto spare parts for repairs.
M: QW-35-FL

© Copyright 2026 Manual.ly