Manual.ly Logo

Maxi-Cosi Tobi Manual

0.0 · 0 Ratings

PDF manual · 35 Pages

English

M: OA-GPT-5-NAN
page

/ 35

Loading...
00eedf932d603ea83a987ae43621e1227199 page 6
12 13
EN EN
A. Malfunction to the belt buckle
• When opening the belt buckle, the buckle sections are released slowly.
• The belt buckle can only be opened with considerable force.
• It is difficult to click the buckle sections into the buckle (too much resistance).
• The buckle will no longer close, the buckle sections will not go together.
• There is no “click” sound when closing the buckle.
B. Solving any problems
• Check the buckle for any dirt and if necessary clean by knocking the dirt out, rinsing, blowing clean or
vacuuming with a vacuum cleaner, for example.
•
NOTE! Never use lubricants!
If you are unable to close the belt buckle or if you are unsure whether you have solved the problem
correctly, contact your retailer or importer immediately (see back of instruction manual). Under no
circumstances should the Tobi be used.
5. General instructions
Always pay attention to the following…
• Always use the seat, even on short trips close to home, as this is when most accidents occur.
• Only use the Tobi in a car and not at home. Car seats are not designed for home use.
• The Tobi may be used in the front seat and in the back seat. Even if the car is equipped with an airbag!
However, we recommend installing it on the back seat. If this is not possible, make sure that, if installing
on a front seat equipped with an airbag, the seat is in the rearmost position. See the car manual, as more
and more cars have the possibility to easily switch off the airbag.
• The seat must always be secured with the seat belt, even when not in use. A loose seat could injure
other passengers in an emergency stop.
• Make sure that the Tobi is not jammed or wedged by heavy luggage, adjustable seats or closing doors.
• Never use the Tobi without the cover. Do not replace the cover by a cover other than the original as the
cover forms part of the total safety of the seat.
• Always cover up the Tobi when the car is parked in the full sun; plastic and metal parts may become
extremely hot, this can cause burns and may discolour the cover unnecessarily.
• To avoid damage to the fabric, do not remove the logos, etc. on the cover.
• Make sure that there is no baggage or other loose objects (for example on the rear shelf) in the car.
In an emergency stop or crash these become dangerous projectiles!
• When making long journeys, make sure to take frequent breaks in order to give your child some
room to move.
• Never leave your child alone in the car unattended.
• Keep the user instructions for future reference in the appropriate place at the back of the Tobi.
• The Tobi is developed for an intensive use of approximately 10 years.
• We advise to check the expanded polystyrene (EPS) parts regularly for damages.
• Do not use second-hand products whose history is unknown. Some parts could be broken, torn or
missing.
• The user should not make any modifications to the car seat or the belts. Also labels or warnings, etc. that
form part of the seat should not be removed in any circumstances!
• Replace the Tobi when it has been subject of violent stresses in an accident: the safety of your child can
no longer be guaranteed.
• The manufacturer knows that car seats may cause impressions in car upholstery or car seat belts.
These cannot be avoided, since the safety standards demand powerful and firm fastening methods.
That is why the manufacturer cannot be held liable for any damage as a result of these.
And of course …
• Always set a good example and wear your own safety belts!
4.2 Fabric cover
Removing the cover
24
25
• Open the belt buckle. Loosen the shoulder belts by pulling them forwards as far as possible (24, 25).
Unhook the elastic loops from the hooks on both sides of the positioning handle.
26
27
• Remove the elastic edge of the cover from the edges of the shell and then carefully loosen the cover at
the front (26, 27).
• Remove the belt buckle pad by pulling it carefully over the belt buckle sideways at an angle. Pass the
cover over the belt buckle (from back to front).
28
• Loosen the cover from the side points on both sides of the shell (28).
39
• Loosen the back flap of the cover and fold it forwards (29).
30
• Remove the cover carefully from the sides (30).
31
• Loosen the cover behind the belt clamps. The cover has been pushed behind the belt clamps here (31,1)
31
• Now pull the cover carefully over the headrest (31,2).
• Remove the cover.
32
• Remove the belt pads of the shoulder belts by loosening the Velcro and the poppers on the outside (32).
33
• Remove the belt behind the flap with the Velcro (33).
34
• Slide the hook clasp out of the loop of the belt pad (34).
35
• Remove the belt pad from the spring (35).
• Do this with both belt pads.
• Repeat the above, with the exception of the clasp, for the two hip belt pads. The hip belt pads are
attached to the belt with Velcro.
36
• Remove the headrest cover by removing the two elastic bands from the bottom flap under the plastic
part (36,1).
• Loosen the headrest cover on one side under a point and remove the cover carefully on this side of the
headrest.
• Carefully loosen the headrest cover at the edge under the handle at the top of the headrest.
36
• Now remove the headrest cover carefully (36,2).
Cleaning the cover
• Wash the cover and belt pads by hand (maximum of 30°C). Do not use a drier. Also see the care
instructions on the cover.
Tip: It is wise to buy an extra cover when purchasing the Tobi so that you can continue to use it even when
the cover is being washed and dried.
Reattaching the cover
• Repeat the above steps in the reverse order!
•
NOTE! First attach the 4 belt pads and the headrest cover before reattaching the cover.
• Slide the cover well into the cover edges of the shell all over.
• Check that the cover is tight fitting all over and secured properly.
4.3 Belt buckle and belt adjustment system functioning and cleaning
The proper functioning of the belt buckle and belt adjustment system is very important for the safety of
the child. The most common reason that the buckle and/or belt adjustment system does not function
properly is because it is dirty (from dust, grime, food particles, etc.). Make sure that the belt buckle stays
clean by vacuuming out all dirt. If the belt adjustment system is not functioning properly, contact your
supplier or importer immediately (see back of instruction manual for contact details). Do not use the
Tobi under any circumstances!
The following is a list of possible causes of function failure and possible solutions.

Chat with your Maxi-Cosi Tobi manual using AI

Get instant AI answers from your Maxi-Cosi Tobi manual

Ask anything about the Maxi-Cosi Tobi. Answers come from this manual, with the pages they are based on.

Tobi Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace the car seat

Do not use the car seat for more than 5 years after purchase due to ageing of plastic materials.

Before every trip
Inspect the seat, harness, and tether

Check secure installation, belt routing, harness fit, buckle indicator, and that the tether is undamaged before every trip.

Regularly
Inspect EPS parts for damage

Check the expanded polystyrene (EPS) parts regularly for damage.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend Tobi?

Yes No

Frequently Asked Questions

A

The Tobi is intended for children approximately 9 months to 3.5 years old, covering a weight range of about 9–18 kg, corresponding to ECE R44/04 Group 1.

Is this answer helpful?

A

The seat must be installed on a forward-facing seat equipped with an automatic 3-point seat belt approved to standards such as ECE R16. If the car’s buckle protrudes above the Tobi frame or the belt positions are too far forward, choose a different seating position.

Is this answer helpful?

A

After buckling the harness, pull the adjustment strap until the buckle’s color indicator turns green. Ensure belts are flat, not twisted, belt pads are positioned on the child’s shoulders, and recheck before each trip.

Is this answer helpful?

A

Remove the fabric cover and belt pads and hand wash at a maximum of 30°C; do not tumble dry. Clean plastic parts with lukewarm soapy water. Keep the buckle and adjustment system free of dirt—vacuum out debris or rinse and dry; never use lubricants.

Is this answer helpful?

A

Stop using the seat immediately. Check and clean the buckle to remove dirt (shake out, rinse, blow out or vacuum). If problems persist or you cannot safely close the buckle, contact an authorized retailer or importer for inspection or service.

Is this answer helpful?

A

Yes, the Tobi may be used on a front seat with an airbag, but rear installation is recommended. If used on a front seat, move the seat to its rearmost position and consult your vehicle manual about disabling the airbag where possible.

Is this answer helpful?

A

The typical warranty period is 24 months covering manufacturing defects when used according to the manual. It excludes normal wear and tear, damage from accidents, misuse, liquid contact, unauthorized repairs, theft, or if identification labels are removed.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Simple visual belt routing with red marks reduces installation errors.
  • Buckle indicator turns green when harness tension is correct for quick checks.
  • Height-adjustable headrest and six harness positions for growing children.
  • Removable cover and belt pads washable by hand (max 30°C) for hygiene.
  • Five seat positions provide adjustable comfort from upright to recline.
VS

Disadvantages

  • Requires correct 3-point automatic belt and may not fit seats with front-positioned buckles.
  • Buckle and adjustment systems can be disrupted by dirt; regular cleaning needed.
  • Not suitable for rear-facing use; forward-facing only (9–18 kg range).
  • Warranty excludes damage from accidents, misuse, or unauthorized modifications.
  • Fabric should not be tumble-dried; washing and drying may be inconvenient.
M: OA-GPT-5-NAN

Product Specification

Group

1

Weight class

19.84-39.68 lb

Age group

9M-4Y

Harness technology

Five-point safety harness

Installation

forward-facing

Isofix

no

Features

height-adjustable headrest and shoulder straps, side impact protection, 5 sitting positions, recline position, removable\/washable cover, belt tensioner, installation indicators

Dimensions (WxHxD)

17.52x28.35x22.64in

Weight

19.29 lb

M: OA-GPT-54-NAN

Product Description

Maxi-Cosi Tobi 2019/2020 Manual

The Maxi-Cosi Tobi 2019/2020 is a forward-facing child car seat designed for toddlers roughly 9 months to 3.5 years (9–18 kg). Engineered with safety, comfort and ease of use in mind, the Tobi meets strict European regulations (ECE R44/04) and includes features intended to reduce incorrect installation and improve everyday usability. It fits on both front and rear seats equipped with an automatic 3-point seat belt and offers five seating positions so you can set it from upright to a more relaxed recline as needed.

Key design highlights include a height-adjustable headrest and shoulder harness with six settings, clear red belt routing marks to guide correct belt installation, and belt tensioners to secure the seat snugly. The harness system automatically releases when the buckle is opened, and the buckle includes a simple color indicator that turns green when the harness is tightened correctly. The seat shell, steel/plastic frame and energy-absorbing materials are combined with a removable fabric cover and comfortable belt pads that help keep straps positioned properly on the child’s shoulders and hips.

Installation and daily use are straightforward when the red routing marks are followed: route the hip belt under the shell, thread the shoulder belt through the marked slots, click the car buckle, close belt clamps, and use the tensioners to pull the belt vertical for maximum tightness. The harness is locked by inserting the buckle parts and tightened via an adjustment strap until the indicator shows green. The seat includes practical features such as spring-open harness straps when unbuckling, and a belt buckle that simultaneously functions as the control for harness length.

Maintenance is user-friendly: the fabric cover and pads are removable for hand washing (max 30°C), and plastic parts can be cleaned with mild soap and water. The manual emphasizes keeping the buckle and adjustment system free of dirt—vacuuming or rinsing is recommended for stubborn debris—and never using lubricants on moving parts. The Tobi is intended for intensive use for about 10 years, but the manufacturer recommends retiring the seat after significant impact in an accident and advises disposal or recycling guidelines for end-of-life handling.

A clear checklist encourages parents to verify correct installation before every trip: seat firmly fixed, belts untwisted, shoulder height appropriate, belt pads positioned correctly, buckle closed with green indicator, and no damage to the tether or EPS parts. Warranty coverage is typically 24 months for manufacturing defects when used according to instructions; normal wear, misuse, accidents, or unauthorized modifications are excluded.

Notes:

  • Suitable for children approx. 9 months to 3.5 years (9–18 kg). Follow red belt routing marks exactly.
  • Use only original accessories; do not modify the seat.
  • If any buckle or adjustment malfunction occurs, stop using the seat and contact an authorized retailer or importer.
  • Avoid leaving children unattended in the car; always secure the seat even when not in use.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly