Manual.ly Logo

Maxi-Cosi Tobi Manual

0.0 · 0 Ratings

PDF manual · 35 Pages

English

M: OA-GPT-5-NAN
page

/ 35

Loading...
00eedf932d603ea83a987ae43621e1227199 page 5
10 11
EN EN
B. Placing the child in the Tobi
• Place the child with his/her back straight in the Tobi.
20
• Slide the buckle sections together (part A on part B) and insert them into the belt buckle with a clearly
audible “click” (20). When the buckle is closed, the belt system is blocked and can only be pulled tighter.
If you need to make the belts longer, the buckle must first be opened again.
21
22
• Now pull the harness system tight by pulling on the adjustment belt (21,2). Pull until the indicator on the
belt buckle turns green (21,2). If this is still silver the belt should be pulled tighter (22). Make sure that the
indicator is green before driving. If it seems like the harness belt is still loose even though the indicator is
on green, the belt can be pulled more tightly. This will ensure optimum safety. While driving, it is possible
that the indicator reverts back to silver as a result of the child’s movements. This is normal and will not
affect the child’s safety.
•
NOTE! The tighter the belts fit around a child, the better the protection.
•
NOTE! Make sure the textured (anti-slip) side of the belt pads are positioned properly on your child’s
shoulders/chest.
•
NOTE! Make sure the belts are not twisted or folded double.
Always use the belt pads, as they are essential for your child’s safety.
Tell the child never to play with the belt buckle.
3.2 Seat positions (Adjusting the seat into sitting and reclining positions)
The Tobi can be set in 5 positions.
23
• Pull the positioning handle under the front of the seat upwards and then pull or push the seat forwards
or backwards (23).
• Release the positioning handle in the desired position and push until you hear a “click”.
•
NOTE! Check to make sure the Tobi is securely locked in the desired position by pulling on it.
Checklist…
To ensure the optimal safety of the child, check before every trip to make sure that …
• the entire Tobi is installed securely and firmly in the car,
• the height of the shoulder belts is suitable for your child,
• the belts are not twisted,
• the textured (anti-slip) side of the belt pads is positioned properly on your child’s shoulders/chest,
• the child is secure in the belts, the belt buckle is shut and the indicator is on green,
• the tether on the Tobi is not damaged. If it is damaged, do not use the Tobi in any circumstances and
contact your retailer or importer immediately.
3.3 Taking the child out
• Place the Tobi in the sitting position (also see section 3.2 Seat positions).
24
• Open the belt buckle by pressing the red button of the buckle (24).
25
• Loosen the shoulder belts by pulling them forwards as far as possible (25).
• Take the child out of the Tobi.
4. Maintenance
4.1 General
• NOTE! Perform these actions only while the Tobi is outside of the car.
• Use lukewarm water, soap and a cloth to clean the plastic parts of the seat. Do not use any aggressive
cleaning agents.
• The fabric parts can be cleaned according to the instructions on the washing label; hand washing in
luke-warm water and a mild detergent.
•
NOTE! Never use lubricants – not even for the moving parts of the Tobi.
• When the seat belt has been installed properly, the various “views” will look as follows:
Checklist…
To ensure the optimum safety of the child, after installing the seat check once more that…
• the seat belt is tight and that it is not twisted,
• the hip part of the seat belt passes over the red belt marks and belt tensioner(s),
• the (diagonal) shoulder part of the seat belt is attached properly and passes through the two belt slots,
along the red marks on the rear of the Tobi,
• both belt clamps are closed,
• the belt tensioner(s) is in the tensioned, vertical position,
• the entire Tobi is installed securely and firmly in the car.
B. Removing the Tobi
11
• Open the belt buckle of the seat belt (11).
12
• Next, open both belt clamps (12).
13
• Release the belt tensioner by pressing the button (13). The belt tensioner will now move down,
into the horizontal position.
14
• Remove the seat belt from the belt slots (14).
• Take the Tobi out of the car.
3. Placing your child in the Tobi
3.1 Using the harness system
A. Adjusting the height of the harness
Before placing the child in the Tobi and locking the harness belt, first determine the correct height of the
shoulder belts and headrest.
15
• Open the belt buckle (15) by pressing the red button of the belt buckle.
• The shoulder belts are now automatically released and can be made longer without pressing
any other buttons.
16
• Loosen the shoulder belts by pulling them forwards as far as possible (16).
•
NOTE! Do not pull on the belt pads when doing so.
17
• Place the child with his/her back straight in the Tobi and check the belt height (17).
18
• NOTE! The height of the shoulder belts is correct when the belt disappears into the shell slightly
above your child’s shoulders (18).
• Adjust the height of the shoulder belts in combination with and by means of the headrest.
19
• To move the shoulder belts and headrest to the required height, move the headrest by the handle on
the top at the same time forwards and up or down (19). The shoulder belts including headrest
can be set to 6 different heights.
Side view, Rear view Side view,
on the side of the roll-up on the side where the belt
mechanism. buckle is located.
Opposite side belt buckle.

Chat with your Maxi-Cosi Tobi manual using AI

Get instant AI answers from your Maxi-Cosi Tobi manual

Ask anything about the Maxi-Cosi Tobi. Answers come from this manual, with the pages they are based on.

Tobi Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace the car seat

Do not use the car seat for more than 5 years after purchase due to ageing of plastic materials.

Before every trip
Inspect the seat, harness, and tether

Check secure installation, belt routing, harness fit, buckle indicator, and that the tether is undamaged before every trip.

Regularly
Inspect EPS parts for damage

Check the expanded polystyrene (EPS) parts regularly for damage.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend Tobi?

Yes No

Frequently Asked Questions

A

The Tobi is intended for children approximately 9 months to 3.5 years old, covering a weight range of about 9–18 kg, corresponding to ECE R44/04 Group 1.

Is this answer helpful?

A

The seat must be installed on a forward-facing seat equipped with an automatic 3-point seat belt approved to standards such as ECE R16. If the car’s buckle protrudes above the Tobi frame or the belt positions are too far forward, choose a different seating position.

Is this answer helpful?

A

After buckling the harness, pull the adjustment strap until the buckle’s color indicator turns green. Ensure belts are flat, not twisted, belt pads are positioned on the child’s shoulders, and recheck before each trip.

Is this answer helpful?

A

Remove the fabric cover and belt pads and hand wash at a maximum of 30°C; do not tumble dry. Clean plastic parts with lukewarm soapy water. Keep the buckle and adjustment system free of dirt—vacuum out debris or rinse and dry; never use lubricants.

Is this answer helpful?

A

Stop using the seat immediately. Check and clean the buckle to remove dirt (shake out, rinse, blow out or vacuum). If problems persist or you cannot safely close the buckle, contact an authorized retailer or importer for inspection or service.

Is this answer helpful?

A

Yes, the Tobi may be used on a front seat with an airbag, but rear installation is recommended. If used on a front seat, move the seat to its rearmost position and consult your vehicle manual about disabling the airbag where possible.

Is this answer helpful?

A

The typical warranty period is 24 months covering manufacturing defects when used according to the manual. It excludes normal wear and tear, damage from accidents, misuse, liquid contact, unauthorized repairs, theft, or if identification labels are removed.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Simple visual belt routing with red marks reduces installation errors.
  • Buckle indicator turns green when harness tension is correct for quick checks.
  • Height-adjustable headrest and six harness positions for growing children.
  • Removable cover and belt pads washable by hand (max 30°C) for hygiene.
  • Five seat positions provide adjustable comfort from upright to recline.
VS

Disadvantages

  • Requires correct 3-point automatic belt and may not fit seats with front-positioned buckles.
  • Buckle and adjustment systems can be disrupted by dirt; regular cleaning needed.
  • Not suitable for rear-facing use; forward-facing only (9–18 kg range).
  • Warranty excludes damage from accidents, misuse, or unauthorized modifications.
  • Fabric should not be tumble-dried; washing and drying may be inconvenient.
M: OA-GPT-5-NAN

Product Specification

Group

1

Weight class

19.84-39.68 lb

Age group

9M-4Y

Harness technology

Five-point safety harness

Installation

forward-facing

Isofix

no

Features

height-adjustable headrest and shoulder straps, side impact protection, 5 sitting positions, recline position, removable\/washable cover, belt tensioner, installation indicators

Dimensions (WxHxD)

17.52x28.35x22.64in

Weight

19.29 lb

M: OA-GPT-54-NAN

Product Description

Maxi-Cosi Tobi 2019/2020 Manual

The Maxi-Cosi Tobi 2019/2020 is a forward-facing child car seat designed for toddlers roughly 9 months to 3.5 years (9–18 kg). Engineered with safety, comfort and ease of use in mind, the Tobi meets strict European regulations (ECE R44/04) and includes features intended to reduce incorrect installation and improve everyday usability. It fits on both front and rear seats equipped with an automatic 3-point seat belt and offers five seating positions so you can set it from upright to a more relaxed recline as needed.

Key design highlights include a height-adjustable headrest and shoulder harness with six settings, clear red belt routing marks to guide correct belt installation, and belt tensioners to secure the seat snugly. The harness system automatically releases when the buckle is opened, and the buckle includes a simple color indicator that turns green when the harness is tightened correctly. The seat shell, steel/plastic frame and energy-absorbing materials are combined with a removable fabric cover and comfortable belt pads that help keep straps positioned properly on the child’s shoulders and hips.

Installation and daily use are straightforward when the red routing marks are followed: route the hip belt under the shell, thread the shoulder belt through the marked slots, click the car buckle, close belt clamps, and use the tensioners to pull the belt vertical for maximum tightness. The harness is locked by inserting the buckle parts and tightened via an adjustment strap until the indicator shows green. The seat includes practical features such as spring-open harness straps when unbuckling, and a belt buckle that simultaneously functions as the control for harness length.

Maintenance is user-friendly: the fabric cover and pads are removable for hand washing (max 30°C), and plastic parts can be cleaned with mild soap and water. The manual emphasizes keeping the buckle and adjustment system free of dirt—vacuuming or rinsing is recommended for stubborn debris—and never using lubricants on moving parts. The Tobi is intended for intensive use for about 10 years, but the manufacturer recommends retiring the seat after significant impact in an accident and advises disposal or recycling guidelines for end-of-life handling.

A clear checklist encourages parents to verify correct installation before every trip: seat firmly fixed, belts untwisted, shoulder height appropriate, belt pads positioned correctly, buckle closed with green indicator, and no damage to the tether or EPS parts. Warranty coverage is typically 24 months for manufacturing defects when used according to instructions; normal wear, misuse, accidents, or unauthorized modifications are excluded.

Notes:

  • Suitable for children approx. 9 months to 3.5 years (9–18 kg). Follow red belt routing marks exactly.
  • Use only original accessories; do not modify the seat.
  • If any buckle or adjustment malfunction occurs, stop using the seat and contact an authorized retailer or importer.
  • Avoid leaving children unattended in the car; always secure the seat even when not in use.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly