Manual.ly Logo

Mafell KSS40 18Mbl Manual

0.0 · 0 Ratings

PDF manual · 110 Pages

English

M: claude-opus-5-5
page

/ 110

Loading...
575b20371ef5fc844bc5aace7612e9356326 page 15
-21-
- Remove the rechargeable batteries from the
machine before carrying out any setting, retooling,
maintenance or cleaning tasks.
- Ensure that the machine is switched off when you
push in the rechargeable battery.
Do not use:
- Cracked and misshapen saw blades.
- Saw blades made of high speed steel (HSS saw
blades).
- Blunt saw blades as they impose an excessive
load on the motor.
- Saw blades with a basic body with a thickness
greater than, or a cutting width (setting) less than,
the thickness of the riving knife / splitter.
- Saw blades which are not suitable for the saw
blade's idling speed.
Instructions on the use of personal protective
equipment:
- Always wear ear protectors during work.
- Always where a dust mark during work.
Instructions on operation:
- Do not reach with your hands into the sawing area
and do not touch the saw blade. With your other
hand, support the supplementary handle or the
motor casing.
- Do not reach under the workpiece.
- Adapt the cutting depth to the workpiece thickness.
- Never support the workpiece in your hand or over
your leg. Secure the workpiece against a sturdy
support.
- When sawing with connected guide rail, the
machine may only be removed from the workpiece
if it is in home position and the retractable saw
guard is closed.
- Only hold the device by its isolated handle
surfaces when carrying out work during which the
cutting tool could hit concealed power cables.
- Always use a limit stop or a straight edge guide for
longitudinal cutting.
- Always use correctly sized saw blades with
matching mounting hole (e.g. star-shaped or
round).
- Never use damaged or incorrect saw blade
washers or screws.
- Hold the saw with both hands and bring your arms
into a position where you are able to resist the
backlash forces. Always stay on the side of the
saw blade, never bring the saw blade in line with
your body.
- If the saw blade jams or sawing is interrupted for
another reason, release the on/off switch and keep
the saw steady in the workpiece until the saw
blade stands completely still. Never try to remove
the saw from the workpiece or to pull it backwards
while the saw blade is still moving or while a
backlash could occur.
- If you would like to restart a saw that is stuck in the
workpiece, centre the saw blade in the saw slit and
check whether the saw teeth are stuck in the
workpiece.
- Support large plates to reduce the risk of backlash
caused by a jammed saw blade.
- Do not use any blunt or damaged saw blades.
- Before starting to saw, tighten the cutting depth
and cutting angle adjustments.
- Be especially careful when making a "plunge cut"
into a concealed area, e.g. into an existing wall.
- Prior to every use, check whether the lower saw
guard is closing properly. Do not use the saw if the
lower saw guard is not freely movable and does
not close immediately. Never clamp or tie down the
lower saw guard in an open position.
- Check the function of the spring for the lower saw
guard. Have the device serviced if the bottom saw
guard and the spring are not in perfect working
order.
- Only manually open the lower saw guard for
special cuts, such as "plunge and angle cuts".
Open the lower saw guard using the retracting
lever and release the lever as soon as the saw
blade has penetrated the workpiece.
- Do not place the saw on the work bench or on the
floor without the lower saw guard covering the saw
blade.
- Use the saw blade that matches the riving
knife/splitter.
- Adjust the riving knife/splitter as described in the
operating instructions.

Chat with your Mafell KSS40 18Mbl manual using AI

Get instant AI answers from your Mafell KSS40 18Mbl manual

Ask anything about the Mafell KSS40 18Mbl. Answers come from this manual, with the pages they are based on.

KSS40 18Mbl Maintenance Schedule

Remind me when maintenance is due
Yearly (approx)
Professional inspection by authorized service

After longer periods of operation, hand the machine to an authorized MAFELL service shop for inspection.

Show in the manual (page 25)
Before every use
Check lower saw guard function

Verify the lower guard closes properly and moves freely before each operation. Do not use if it is stuck or does not close immediately.

Show in the manual (page 21)
After long storage
Clean machine and protect metal parts

If not used for a long time, clean the machine thoroughly and spray bare metal parts with a rust inhibitor.

Show in the manual (page 25)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend KSS40 18Mbl?

Yes No

Frequently Asked Questions

A

The Mafell KSS40 offers a maximum cutting depth of 42 mm at 0 degrees and 29 mm at a 45-degree angle. This allows for deep cuts in solid wood and various panel materials while maintaining stability.

Is this answer helpful?

A

The standard package includes two 18V 5.2Ah lithium-ion batteries. This dual-battery setup ensures you have a spare ready while one charges, minimizing downtime on the job site.

Is this answer helpful?

A

Yes, the KSS40 is fully capable of plunge cuts. You must open the lower guard manually using the lever, position the machine against a stop, and then press the plunge lever to lower the blade vertically into the material.

Is this answer helpful?

A

The KSS40 is specifically optimized for the Mafell FLEXI rail system. While it can cut freehand or with a parallel stop, using third-party rails may affect the precision and fit of the guide elements.

Is this answer helpful?

A

Key safety features include an upper fixed guard, a lower retractable guard, an electronic brake that stops the blade quickly, a riving knife to prevent kickback, and isolated handles to protect against hidden wiring.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High torque 18V motor delivers 6700 RPM for fast, clean cuts in solid wood and panels
  • Includes two 5.2Ah batteries and a fast charger for extended continuous work time
  • Advanced safety features include automatic blade brake and retractable lower guard
  • Compatible with FLEXI rail system for ultra-precise long cuts up to 140 cm
  • Lightweight design at 2.8 kg reduces user fatigue during prolonged overhead work
VS

Disadvantages

  • Higher initial investment cost compared to standard corded circular saws
  • Requires specific Mafell accessories and blades for optimal compatibility
  • Battery life can decrease significantly in extremely cold temperatures below 0°C
  • Maximum cutting depth is limited to 42 mm which may be insufficient for thick timber
  • Dust collection efficiency depends heavily on using an external vacuum extractor
M: QW-35-FL

Product Specification

Type

Circular saw

Battery

2x Battery (18V, 5.2Ah, Li-Ion)

No-load speed

6700 rpm

Blade diameter

4.72 inches

Cutting capacity

1.65 inches (cut depth at 0 degrees), 1.06 inches (cut depth at 45 degrees tilt)

Bevel angle

45 degrees/60 degrees

Arbor hole

0.79 inch

Features

Fence, dust extraction, bevel function

Weight

8.05 lbs

Package contents

Case (T-Max), charger, 2x battery, dust bag, guide rail (FX140)

M: QW-35-FL

Product Description

Mafell KSS40 18Mbl Akku-Handkreissäge: Precision Power in Your Hands

The Mafell KSS40 18Mbl is a top-tier cordless cross-cutting system designed for professional carpenters and woodworkers who demand absolute precision. This versatile tool combines the freedom of battery power with the robust performance of a high-end table saw. Equipped with two 5.2Ah batteries, a dedicated charger, and a durable transport case, this kit is ready to tackle any project from fine joinery to heavy-duty framing.

At the heart of the KSS40 lies an 18-volt motor capable of reaching 6700 RPM at no load. It features a cutting depth of up to 42 mm at 0 degrees and 29 mm at 45 degrees, allowing for deep bevel cuts in solid wood and panel materials alike. The machine includes essential accessories like a carbide-tipped circular saw blade with 24 teeth, a riving knife to prevent kickback, and a parallel stop for consistent rip cuts. For even greater accuracy, the system supports the FLEXI rail FX 140, enabling perfectly straight cuts up to 140 cm without the need for a separate guide rail setup.

Safety is paramount in the design of the KSS40. It comes equipped with both upper fixed and lower retractable saw guards that automatically cover the blade when not in use. The electronic brake ensures the blade stops almost instantly after releasing the trigger. The handle is ergonomically designed with isolated surfaces to protect against hidden electrical cables, and the machine weighs only 2.8 kg without the parallel stop, making it easy to maneuver on-site.

Whether you are creating shadow gaps, performing plunge cuts into existing walls, or executing precise mitre joints, the KSS40 adapts to your needs. The included chip extraction port allows for connection to dust extractors, keeping your workspace clean and reducing health risks associated with wood dust. With its comprehensive set of safety instructions and low vibration levels below 2.5 m/s², this saw ensures a comfortable and secure working experience.

M: claude-opus-5-5

© Copyright 2026 Manual.ly