Manual.ly Logo

Lupine SL Nano Manual

0.0 · 0 Ratings

PDF manual · 11 Pages

English

M: OA-GPT-5-NAN
page

/ 11

Loading...
7635dbb00b1d56b9cd8be59aa12de8b98044 page 6
Hinweis auf eingeschränkte Verwendung:
Bei Fahrrädern mit elektrischer Tretunterstützung kann die Versorgung der
Beleuchtungsanlage über eine Kopplung an den Energiespeicher für den
Antrieb erfolgen, wenn nach entladungsbedingter Abschaltung des Unterstüt-
zungsantriebs noch eine ununterbrochene Stromversorgung der Beleuch-
tungsanlage über mindestens zwei Stunden gewährleistet ist und/ oder der
Antriebsmotor als Lichtmaschine übergangsweise benutzt werden kann, um
auch weiterhin die Lichtanlage mit Strom zu versorgen.
Verhalten bei Defekten:
Im Falle eines Defekts muss der Scheinwerfern bzw. Lichtquelle generell er-
setzt werden. Beim Ausfall einer LED-Lichtquelle des Abblendlichtes, wird das
Abblendlicht inkl. der Fernlichtfunktion deaktiviert. Ein Tausch bzw. Reparatur
ist nur bei Lupine möglich.
Hinweise
Mehr Informationen unter www.lupine.de
EG Konformitätserklärung: www.lupine.de/ce/
Safety instructions
Warning!
Avoid looking directly into the light emitted by the light or shining the light into
your own eyes or the eyes of another person. If the light accidentally shines
into your eyes, close your eyes and move your head out of the light beam. Do
not use any strongly focusing optical device to look at the light beam.
This device may then be used by children 8 years of age or older, persons
with limited physical, sensory or mental capabilities, as well as persons with no
previous experience in handling such devices, if they are supervised by a person
responsible for their safety.
Carry a spare light with you at all times, as the product can potentially fail
unexpectedly at any time.
Defects: Light source must be replaced in general if the light source (or one of
the LEDs) is defective.
Heat generation: The housing of SL may heat up; so make sure that you always
keep the light at a safe distance to any combustible or flammable materials.
Could cause fire or death! However, quiescent operation (without cooling the
light housing via airflow or the like) is possible at any time and will not damage
the product.
Water resistance: All SL components are waterproof and can of course be used
under extremely severe conditions. The lamp complies with IP protection class
68 but is NOT a diving lamp and is NOT suitable for use under water.
Cleaning: Do not use a strong water jet or heavy detergent to clean the lamp.

Chat with your Lupine SL Nano manual using AI

Get instant AI answers from your Lupine SL Nano manual

Ask anything about the Lupine SL Nano. Answers come from this manual, with the pages they are based on.

SL Nano Maintenance Schedule

As needed
Clean the lamp

Do not use a strong water jet or heavy detergent to clean the lamp.

On failure
Replace defective light source

If the LED light source is defective, replace the entire headlight; repairs are only possible at Lupine.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SL Nano?

Yes No

Frequently Asked Questions

A

The SL Nano offers DRL (~2 W), low beam (factory 5–8 W depending on mode), and high beam (factory 8–14 W). Maximum stated output is up to 900 lumens. ECO factory settings are High 14 W, Low 8 W, DRL 2 W.

Is this answer helpful?

A

All components are waterproof and the housing meets IP68, but the lamp is not suitable for underwater use. It is designed for severe weather conditions but should not be used as a diving light.

Is this answer helpful?

A

Position the clamp halves around the left side of the stem, insert the M4 bolt with O-ring(s) in order, and tighten the clamp to the lamphead with the supplied keys (3 mm at 2 Nm, final 2.5 mm at max 1 Nm). Keep the mount close to the stem and ensure notches interlock.

Is this answer helpful?

A

Check that the light cable is connected, the light input is activated in the bike’s software, and the drive unit voltage is sufficient (switch to 12 V if needed). Also verify compatibility at lupine.de and try resetting to factory settings.

Is this answer helpful?

A

No. If an LED or the light source fails the entire headlight must be replaced or serviced by Lupine. Replacement or repair is handled only by Lupine to maintain safety and performance.

Is this answer helpful?

A

Yes. When DRL is active the built-in ambient sensor measures light every ~5 seconds and will automatically switch to low beam when it becomes sufficiently dark. It does not automatically revert from low beam to DRL.

Is this answer helpful?

A

Compatibility depends on the e-bike drive system. The bike must provide stable power and light input activation; some systems require dealer activation. The headlight can be used if the drive prevents deep battery discharge and/or supplies sufficient light power.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact CNC aluminum body (30x41x41 mm) with IP68 waterproofing.
  • Up to 900 lumens with selectable DRL, low and high beam modes.
  • Built-in ambient light sensor for automatic DRL-to-low-beam switching.
  • Simple clamp mount and optional stem kit for centered installation.
  • Robust thermal design allows stationary operation without damage.
VS

Disadvantages

  • Not suitable for underwater use despite IP68 rating.
  • If an LED fails, entire lamp must be replaced—no user repair.
  • Requires compatible bike drive and light input activation on some e-bikes.
  • Small size limits heat dissipation at very high continuous output.
  • Wired remote required for mode indication and switching; adds cabling.
M: OA-GPT-5-NAN

Product Specification

Type

Front light

Colors

black, grey

Max. light output

900lm

Light source

2x LED

Light mode

Continuous light

Power supply

36V (E-Bike)

Mounting

Bracket

Dimensions

1.18x1.61x1.61in

Weight

0.11 lb

Special features

waterproof, dustproof, exclusively for e-bikes, StVZO compliant

M: OA-GPT-54-NAN

Product Description

Lupine SL Nano Front Light Manual — Compact Power for Every Ride

The Lupine SL Nano Front Light is a compact, high-performance bicycle headlight designed for reliable daytime visibility and powerful low- and high-beam illumination. Engineered from CNC-machined 6061-T6 aluminum and sealed to IP68 standards, the SL Nano packs two Osram automotive LEDs behind a biconical TIR lens into a tiny 30 x 41 x 41 mm housing. It delivers up to 900 lumens (max), with configurable outputs for daytime running light (DRL), low beam and high beam, and offers robust thermal design so it can safely operate while stationary or in motion.

Practical installation and durability are central to the SL Nano. The mount uses a simple clamp system with M4 hardware and O-rings to secure the lamp near the stem; recommended mount heights are 400–1,200 mm with the light cone’s half-height positioned at 5 m. An optional stem kit enables centric mounting on wider stems. The wired remote button mounts beside the grip and indicates active modes with colored LEDs: green for low beam, blue for high beam, and off or no light for DRL or standby.

User controls and electronics offer flexible programming. Out of the box the lamp defaults to ECO settings (factory low/high/DRL wattages), but users can customize output levels and toggle modes via the wired remote and the bike’s display. A built-in ambient light sensor (measuring every ~5 seconds) automatically switches DRL to low beam when darkness is detected. The lamp operates from 6–12 V systems; compatibility with the bike’s drive unit and activation of the light input in the drive software may be required.

Safety and maintenance are emphasized: never look directly into the beam or use strongly focusing optics; keep the housing away from flammable materials because it can heat in use; and carry a spare light since LED or light-source failures require replacement of the entire lamp—repairs and replacements are handled by Lupine. While the unit is fully waterproof and rated IP68, it is not intended for underwater use. Clean with gentle methods only.

With straightforward mounting, clear troubleshooting steps (check cable, activation, voltage, or return to factory settings), and robust materials and sealing, the SL Nano suits commuters and e-bike riders who need a compact, dependable headlight that balances daytime visibility and night-time illumination.

Notes

  • Factory ECO mode: High beam 14 W, Low beam 8 W, DRL 2 W. Custom lower-power presets available.
  • If one LED fails, headlight functions may be disabled; replacement required via Lupine.
  • Compatible with e-bike systems only if the drive provides stable light power and proper cut-off/charging safeguards.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly