Manual.ly Logo

Liebherr ICNci 5173-22 Peak NoFrost Manual

0.0 · 0 Ratings

PDF manual · 38 Pages

English

M: OA-GPT-5-NAN
page

/ 38

Loading...
239e23fca3f17c8aa2178c19e35f1a124eaf page 1f
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system can be disassembled/
cannot be disassembled
Drawer on appliance base
or glass shelf
cannot be disassembled
Fully extendible* cannot be disassembled*
Partial pull-out fridge
compartment*
cannot be disassembled*
Partial pull-out freezer
compartment
can be disassembled
(see Partial pull-out freezer
compartment)
9.2.2 Drawer on telescopic rails
Partial pull-out freezer compartment
Disassembling pull-out system
Make sure the following prerequisites are met:
q
Drawer has been removed.
q
Glass shelf has been removed. (see 8.9 Glass shelves)
Fig. 148 Glass shelf with rails
u
Push up front click-in hooks. Fig. 148(1)
u
Move the pull-out rails to the side Fig. 148 (2) and to the
rear Fig. 148(3).
Installing pull-out system
Fig. 149 Glass shelf with rails
u
Hook in rail at the back. Fig. 149(1)
u
Hook in rail at the front. Fig. 149(2)
9.3 Defrosting the appliance
9.3.1 Defrosting the fridge compartment
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
u
Clean the drain opening regularly (see 9.4 Cleaning the
appliance) .
9.3.2 Defrosting the freezer compartment with
NoFrost
Defrosting is performed automatically with the NoFrost
system. The moisture is deposited on the evaporator, is peri‐
odically defrosted and evaporates.
The appliance does not need to be defrosted.
9.4 Cleaning the appliance
9.4.1 Ready
WARNING
Danger of electric shock!
u
Remove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
u
Do not damage the refrigeration circuit.
u
Empty the appliance.
u
Remove mains connector.
-or-
u
Activate CleaningMode. (seeCleaningMode)
9.4.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
u
Only use soft cleaning cloths and ph-neutral all-purpose
cleaners.
u
Do not uses abrasive sponges or steel wool which may
cause scratches.
u
Do not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
u
Plastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
u
Metal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
u
Drain hole: remove deposits using a thin item (for
example a cotton bud).
9.4.3 Cleaning the dry rear panel
You can remove the dry rear panel for cleaning.
Removing the rear panel
u
Remove all equipment parts.
Fig. 150
u
Hold the rear panel with both hands at the bottom and
pull downward vigorously at the same time.
u
Pull the rear panel out to the front by the bottom end.
w
The rear panel has been removed.
If you want to continue operating the appliance with the
rear panel removed:
u
Set the D-Value to D2. (see D-Value)
Maintenance
* Depending on model and options 31

Chat with your Liebherr ICNci 5173-22 Peak NoFrost manual using AI

Get instant AI answers from your Liebherr ICNci 5173-22 Peak NoFrost manual

Ask anything about the Liebherr ICNci 5173-22 Peak NoFrost. Answers come from this manual, with the pages they are based on.

ICNci 5173-22 Peak NoFrost Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Replace FreshAir carbon filter

Change the air filter every six months when the display reminder appears to guarantee air quality.

Show in the manual (page 20)
After 5 days out of use
Clean IceMaker lines and drawer

If the appliance is out of use for more than 5 days, clean the IceMaker with the TubeClean function and wash the drawer with warm water and detergent.

Show in the manual (page 31)
Regularly
Clean drain opening

Clean the drain opening regularly to ensure proper drainage during automatic defrosting.

Show in the manual (page 31)
As needed
Clean interior and components

Clean the interior, shelves, drawers, and VarioSafe parts using soft cloths and neutral cleaners; do not use abrasive agents.

Show in the manual (page 31)
Before first use
Clean IceMaker

Clean the IceMaker before using it for the first time by running the TubeClean function and washing the drawer.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ICNci 5173-22 Peak NoFrost?

Yes No

Frequently Asked Questions

A

NoFrost prevents ice formation in the freezer by depositing moisture on the evaporator and periodically defrosting and evaporating it automatically. This eliminates manual defrosting, keeps storage efficient, and maintains consistent cooling performance.

Is this answer helpful?

A

Install and register the SmartDevice app, then use the appliance WiFi function via the Touch & Swipe display to establish the connection. Follow the app setup prompts. Note: SmartDevice is not available in some countries.

Is this answer helpful?

A

MaxIce increases ice production by supplying more water and optimizing cycles. Clean the IceMaker using the TubeClean function with a 1.5 L container placed under the unit or by manual cleaning per the instructions to ensure hygienic lines and reliable ice production.

Is this answer helpful?

A

Use SuperFrost when freezing large amounts (activate ~6–24 hours prior depending on quantity). SuperCool quickly lowers fridge temperatures for newly added food. PowerCool optimizes air circulation at high ambient temperatures or humidity to prevent condensation.

Is this answer helpful?

A

Ensure adequate ventilation, avoid direct heat sources, keep vents and fan slits clear, minimize door openings, set appropriate temperatures, use HolidayMode during long absences, and replace the FreshAir carbon filter every six months.

Is this answer helpful?

A

Confirm the alarm to silence the tone, check for causes like door left open, large warm loads, or power cuts, and ensure proper ventilation. If the fault persists, note the error code and contact customer service with model and serial numbers.

Is this answer helpful?

A

Yes via VarioTemp you can set the freezer between -2 °C and 14 °C for use as an additional cooling zone. Reaching new temperatures may take several hours depending on the initial and target temperatures.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • NoFrost technology prevents ice build-up and removes need for manual defrosting.
  • SmartDevice WiFi connectivity and intuitive Touch & Swipe display enable remote control and advanced settings.
  • IceMaker with MaxIce and TubeClean provides reliable ice production and hygienic line cleaning.
  • VarioSpace, adjustable shelves and VarioTemp allow flexible storage and use of freezer as cooling zone.
  • Energy-saving modes (EnergySaver, HolidayMode) and clear ventilation guidance support efficient operation.
VS

Disadvantages

  • Advanced menu access requires numeric code which can be inconvenient to set up.
  • SmartDevice features are restricted in some countries (e.g., Russia, Belarus, Kazakhstan).
  • SabbathMode suppresses alarms and reminders, creating risk after power outages if not checked.
  • Cleaning and servicing IceMaker and tubing may require regular attention and proper procedure.
  • Large or complex appliance may need careful installation and adequate ventilation to maintain efficiency.
M: OA-GPT-5-NAN

Product Specification

Type of construction

integrable (flat hinge)

Energy efficiency class

C (A to G)

Energy consumption

146 kWh/yr

Front color

silver

Side color

white

Fridge compartment capacity

6.50 cu ft (top)

Freezer compartment capacity

2.51 cu ft (bottom)

Total capacity

9.01 cu ft

Star rating

4

Freezing capacity in 24h

13.23 lb

Storage time during power failure

9 hr

Display

Touchscreen

Features

Vegetable drawer (EasyFresh), NoFrost, Fast cooling, Fast freezing, Dynamic cooling, LED lighting, Divisible glass shelf, Door soft close, Door alarm, Ice dispenser (internal, fixed water connection)

Smart Home

App control (Wi-Fi (WLAN), SmartDevice)

Climate class

SN/N/ST/T

Noise level

33 dB

Airborne acoustical noise emission class

B (A to D)

Door system

Door hinge right, reversible

Dimensions

22.01x69.69x21.50 in (WxHxD)

Installation dimensions

22.05-22.44x69.76-70.39x21.65 in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Liebherr ICNci 5173-22 Peak NoFrost Manual

The Liebherr ICNci 5173-22 Peak NoFrost is a high-end integrated fridge-freezer designed for modern kitchens, combining efficient NoFrost freezing with smart connectivity and precise temperature control. Built for domestic and household-like use, this model emphasizes food preservation, energy efficiency, and user convenience through an intuitive Touch & Swipe display and optional SmartDevice WiFi integration.

The appliance offers separate fridge and freezer zones, an EasyFresh humidity-controlled drawer for fruits and vegetables, and versatile VarioSpace storage for bulky items. The NoFrost system prevents ice build-up in the freezer, eliminating manual defrosting. A factory-set D-Value accommodates a removable dry rear panel for cleaning while preserving energy performance when reinstalled. The freezer includes an IceMaker with optional MaxIce and TubeClean features for automated ice production and hygienic line cleaning. VarioTemp lets you convert the freezer into an adjustable cooling zone (-2 °C to 14 °C) for flexible storage needs.

Operation is centered on the Touch & Swipe display, which organizes functions into Main, Settings, and Advanced menus (Advanced requires a numeric code). Key functions include SuperCool and PowerCool for rapid cooling, SuperFrost for fast freezing, PartyMode (combines fast cooling/freezing and MaxIce), HolidayMode to lower energy use during absences, SabbathMode for religious observance compliance, CleaningMode for safe maintenance, and EnergySaver to reduce consumption. Display brightness, door alarm timing, language, temperature unit, and IceMaker water flow are user-configurable.

Practical features ensure everyday ease: adjustable shelves and VarioSafe compartments, removable drawers and glass shelves for VarioSpace, a FreshAir carbon filter to neutralize odors, bottle and egg holders, a covered ice cube tray, and freezer packs for power-outage protection. Safety and installation guidance cover flammable refrigerant precautions, correct ventilation, climate class suitability, and recommended ambient ranges. The manual also lists troubleshooting steps, fault messages, operating noises, technical specs (including ice production rates and maximum freezing capacity), and customer service instructions.

Before initial use, remove transport materials, install per the guide, and allow the fridge to reach set temperatures (about 6 hours recommended). If equipped, prime and clean the IceMaker per instructions. The manual stresses proper packaging and storage of food, safe defrosting and re-freezing rules, and periodic maintenance like replacing the FreshAir carbon filter every six months.

Notes:

  • NoFrost eliminates manual freezer defrosting but regular cleaning of drains and components is advised.
  • SmartDevice features require app installation and registration; not available in all countries.
  • SabbathMode suspends many electronic alerts and modifies behavior—exercise caution after power outages as alarms may not sound.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly