Manual.ly Logo

Lian Li O11 Dynamic EVO RGB Manual

0.0 · 0 Ratings

PDF manual · 29 Pages

English

M: OA-GPT-5-NAN
page

/ 29

Loading...
2a8a276ebcdffe68b21351f098657451f2d0 page 18
Fit in/安裝扣位/
Emplacement de Montage
2.5" SSD installation/
2.5" SSD安裝
Installation d’un SSD 2.5"
3.5" HDD installation/
3.5" HDD安裝
Installation d’un HDD 3.5"
Pay attention to the installation orientation/
注意安裝⽅向/
Faites attention à l'orientation d'installation
2.5" SSD, 3.5" HDD installation
2.5" SSD ,3.5" HDD安裝 2.5" SSD ,3.5" HDD / 2.5" SSD ,3.5" HDD-Installation /
/ Installation de
Instalación de 2.5" SSD ,3.5" HDD / 2.5" SSD ,3.5" HDD
の取り付け
Gap for cable routing/
過線空間/Espace pour le
passage des câbles
Reverse
Remove Hard Drive Bracket
卸除硬碟安裝架 /Retirer le support de disque dur/Festplattenhalterung entfernen/
Quitar el soporte del disco duro/ハードドライブブラケットを取り外す
- 24 -
Push/推/Pousser

Chat with your Lian Li O11 Dynamic EVO RGB manual using AI

Get instant AI answers from your Lian Li O11 Dynamic EVO RGB manual

Ask anything about the Lian Li O11 Dynamic EVO RGB. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend O11 Dynamic EVO RGB?

Yes No

Frequently Asked Questions

A

The case supports Normal and Reverse orientations. Switching modes requires moving standoffs, changing the I/O shield position, and swapping PSU/hard drive bracket locations as described in the installation steps.

Is this answer helpful?

A

It supports up to three 120 mm or 140 mm fans, a 360 mm radiator, and in specific layouts a 420 mm radiator (requires brackets and overall thickness check ≤ 83 mm). Side and top mounts vary by mode; consult clearance specs before installation.

Is this answer helpful?

A

Both top and bottom ARGB strips contain 47 LEDs each. There are 14 lighting effects, 11 fixed colors in single-color mode, brightness control, memory function, and on-board buttons for Color (C), Mode (M), and Brightness (B).

Is this answer helpful?

A

Yes. The case supports optional vertical GPU kits (e.g., VG4 series) and includes an adjustable anti-sag bracket kit and adhesive-backed supports to accommodate GPU thickness and prevent sagging.

Is this answer helpful?

A

The chassis supports multiple 2.5" SSD mounts and removable HDD trays for 3.5" drives. Typical configurations include up to four 2.5" SSDs or combinations of 2.5" and 3.5" drives, depending on mode and bracket placement.

Is this answer helpful?

A

There are cable holders, removable cable clips, Velcro straps, and routing gaps for clean cable management. The manual recommends securing large cables in holders and smaller cables with Velcro for optimal organization.

Is this answer helpful?

A

Reinstall protective clips and secure removable parts like pillars and glass panels. The manual specifically recommends keeping the protecting clip on for transport to protect glass and internal components.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Highly modular design allowing Normal and Reverse motherboard orientations for versatile builds.
  • Supports large cooling setups including up to 420 mm radiators and multiple 120/140 mm fans.
  • Integrated ARGB with 47 LEDs top/bottom, 14 lighting effects, memory function, and on-board controls.
  • Generous storage and expansion: multiple 2.5" SSD mounts, removable HDD trays, and optional vertical GPU kits.
  • Thoughtful cable management with cable clips, holders, Velcro straps, and removable dust filters.
VS

Disadvantages

  • Converting between modes requires removing multiple brackets and repositioning standoffs, adding build complexity.
  • Large radiator installations (420 mm) need specific brackets and careful thickness checks (≤83 mm).
  • ARGB and lighting controls are primarily on-board; advanced sync may require motherboard compatibility or additional cables.
  • Glass panels and modular parts increase risk during transport—protective clips and careful packing are recommended.
  • Multiple installation styles for fan brackets may be confusing for first-time builders without careful reading.
M: OA-GPT-5-NAN

Product Specification

External

N/A

Internal

2x 2.5"/3.5" (crosswise, HDD cage), 2x 2.5", 2x 3.5" (instead of other fans 3x 4.72/5.51in) or variant 2: 2x 2.5"/3.5" (crosswise, HDD cage), 2x 2.5", 4x 2.5" (instead of other fans 3x 4.72/5.51in)

Ports

1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 2x USB-A 3.0 (5Gb/s), 1x 0.14in jack (Line-In/Out)

PCI slots

7

Fans (front)

N/A

Fans (rear)

1x 4.72in (optional)

Fans (left)

3x 4.72in (optional, instead of 2x 3.5"/4x 2.5") or 3x 5.51in (optional, instead of 2x 3.5"/4x 2.5") with case configuration Reverse Mode

Fans (right)

3x 4.72in (optional, instead of 2x 3.5"/4x 2.5") or 3x 5.51in (optional, instead of 2x 3.5"/4x 2.5") with case configuration Normal Mode

Fans (top)

3x 4.72in (optional) or 3x 5.51in (optional)

Fans (bottom)

3x 4.72in (optional) or 3x 5.51in (optional)

Radiator sizes

N/A front, 14.17/16.54in top, 11.02/14.17in left (only with Reverse Mode, instead of 2x 3.5"/4x 2.5"), 11.02/14.17in right (only with Normal Mode, instead of 2x 3.5"/4x 2.5"), 14.17in bottom

Motherboard

up to ATX (11.02in wide)

Supported Motherboards

Mini-ITX (6.7"x6.7")/µATX (9.6"x9.6")/ATX (12"x9.6")/E-ATX (12"x11.02")

PSU

ATX (max. 8.66in deep)

PSU position

bottom (vertical)

CPU cooler

max. 6.57in height

Graphics cards

max. 17.94in

Lighting

integrated LED control, integrated RGB LED lighting

Dimensions (WxHxD)

11.42x18.54x18.82in

Volume

17.25gal

Weight

35.27lb

Case type

Mid-Tower

Front

closed, glass

Top

partially closed, mesh, mostly fan grille

Bottom

partially closed, mostly fan grille, external dust filter

Left

closed, glass

Right

partially closed, mesh, mostly fan grille

Rear

partially closed, fan grille top right, PCI slots bottom (7x horizontal)

Front I/O Position

Case side: modular (Front/left/right), Height: bottom, Position: modular

Motherboard orientation

Motherboard orientation modular: to the left or to the right; Connectors: rear connectors

Special features

Aluminum case, cable management, dust filter, graphics card vertically mountable (optional), I/O panel position optionally modular, glass side panel, multi-chamber design

Note on E-ATX

Motherboard and case manufacturers designate different dimensions as E-ATX. Motherboards with E-ATX/SSI EEB dimensions of 12.01"x12.99" or 12"x13" are not supported.

USB notation

Link

M: OA-GPT-54-NAN

Product Description

Lian Li O11 Dynamic EVO RGB — Sleek, Modular, RGB-Focused Chassis

The Lian Li O11 Dynamic EVO RGB blends premium build quality with flexible configuration options aimed at enthusiasts and custom builders. Its hallmark is a roomy interior that supports multiple cooling setups, including triple 120/140 mm fan mounts and large radiators up to 420 mm. Dual glass panels and refined aluminum trim deliver a striking showcase for components and ARGB lighting.

This chassis is designed for modularity: the front pillar, side and front glass, top cover, and multiple fan brackets are removable to accommodate different layouts. The case supports both normal and reverse motherboard orientations, with clearly documented steps to swap standoffs, I/O shield position, and PSU/hard drive bracket placement. That flexibility allows builders to prioritize airflow, cable routing, or display orientation depending on the build.

ARGB lighting is integrated with 47 LEDs in both the top and bottom strips, offering 14 lighting effects, memory function, and on-board controls for color, mode, and brightness. The front I/O includes audio combo jack, two USB 3.0 ports, and a USB 3.1 Type-C, with configurable I/O module positions and a removable cable clip for tidy routing.

Storage and expansion are generous: multiple 2.5" SSD mounts, removable HDD trays, and an optional vertical GPU kit/anti-sag bracket support large GPU builds. The case provides clear guidance for radiator mounting (including a dedicated 420 mm bracket) and includes anti-vibration rings, cable ties, Velcro straps, and spare standoffs. Fan brackets can be reversed in four styles for front- or motherboard-facing airflow, and dust filters are removable for easy maintenance.

Assembly and customization are emphasized with detailed hardware lists, labeled screws, and dedicated brackets for PSU and HDD mounting. Cable management features include multiple cable holders, velcro straps, and routing gaps. The chassis also supports optional kits such as vertical GPU mounts and front mesh upgrades.

Notes:

  • Both top and bottom ARGB strips contain 47 LEDs and default to the Fireworks effect with memory function.
  • The case supports ATX and E-ATX motherboards; check radiator thickness limits (e.g., 420 mm overall thickness ≤ 83 mm) before installation.
  • Follow recommended sequences when converting between Normal and Reverse modes to avoid rework.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly