Manual.ly Logo

Ksix Sophia Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 24

Loading...
dfb7fa5426f94f2910b9a9962bac60bed564 page 2
Modo de empleo
Pulse el botón lateral durante 3 segundos para encender la luz.
Pulse el botón lateral durante 1 segundo para cambiar el modo de iluminación:
1. MODO NOCHE:
El sensor emitirá una luz azul que parpadeará 6 veces. Una vez activado este modo, la luz
solo se encenderá de noche. No se encenderá si es de día.
2. MODO DÍA:
El sensor emitirá una luz roja parpadeará 6 veces. Una vez activado este modo, la luz se
encenderá únicamente cuando detecte movimiento.
3. MODO FIJO:
El sensor no emitirá ninguna luz. Una vez activado este modo, la luz permanece fija y se
puede utilizar como linterna.
Pulse el botón lateral durante 3 segundos para apagar la luz.
Carga
Conecte el cable de carga micro USB incluido en el producto a un ordenador o una fuente
de alimentación con puerto USB A.
Se encenderán diferentes luces dependiendo del estado de la carga:
• Cargando: se encenderá una luz roja fija.
• Carga completa: la luz roja fija pasará a luz azul. Esto indicará que la carga se ha
completado.
• Protección por baja corriente: si el voltaje conectado a la luz es inferior a 2.7V, la luz roja
y la luz azul parpadearán 6 veces al mismo tiempo y la luz se apagará.
Instalación
• Asegure las 2 piezas metálicas con adhesivo en la parte trasera de la regleta diseñada
para ello (deberán estar fijadas como si fueran imán).
• Busque una superficie plana y limpie esa zona para obtener una mejor adherencia.
• Retire con cuidado el film protector de los adhesivos de ambas piezas metálicas y fije la
luz a la superficie deseada.
• Separe la luz de las piezas metálicas para cargar la luz, limpiarla o transportarla a modo
linterna.
Precauciones de seguridad
1. Este producto funciona con batería recargable.
2. No instale este producto en lugares húmedos.
3. No exponga el producto a altas temperaturas ni a la luz solar directa. Puede afectar al
correcto funcionamiento del mismo.
4. No instalar dos luces demasiado cerca. La iluminación de una de las dos puede afectar
al funcionamiento de la otra.
5. Mantenga el producto alejado del fuego y del agua para evitar el riesgo de fugas o
explosiones.
Recomendaciones de mantenimiento
• Limpie regularmente el producto con un paño seco. El producto debe estar
desconectado o apagado cuando se limpie.
• Mantenga los puertos y conectores del producto limpios de polvo, suciedades, etc., para
asegurar una correcta conexión.
• Evite roturas en el producto. No le coloque objetos encima ni lo doble con exceso de
fuerza.
• Si el producto tiene un cable, no lo doble y no lo estire con exceso de fuerza para no
dañarlo.
• No moje, ni sumerge el producto. Mantenga el producto siempre en un lugar seco y lejos
de la humedad.
• Cuando no utilice el producto, guárdelo en un lugar limpio y seco, lejos de la humedad y
de la suciedad.
• Si entra agua en el producto, desconéctelo inmediatamente de cualquier fuente de
energía o dispositivo a la que esté conectado.

Chat with your Ksix Sophia manual using AI

Get instant AI answers from your Ksix Sophia manual

Ask anything about the Ksix Sophia. Answers come from this manual, with the pages they are based on.

Sophia Maintenance Schedule

Regularly
Clean the product with a dry cloth

Ensure the product is disconnected or switched off before cleaning.

Regularly
Keep ports and connectors free from dust

Remove dust and lint to ensure proper connection.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Sophia?

Yes No

Frequently Asked Questions

A

Connect the included micro USB cable to a computer or power source. A red light indicates charging, and blue means full charge. Always disconnect if voltage is below 2.7V.

Is this answer helpful?

A

The sensor emits a blue light flashing 6 times. The lamp only turns on at night and stays off during the day to save energy.

Is this answer helpful?

A

Yes, but avoid damp locations directly. Keep it away from water to prevent leakage or explosion risks as per safety rules. Do not expose to high heat.

Is this answer helpful?

A

The device contains a 1800mAh lithium battery. It provides sufficient power for extended use before needing a recharge cycle of 4 to 5 hours.

Is this answer helpful?

A

Press the side button for 3 seconds. This will shut down the device regardless of the current active lighting mode.

Is this answer helpful?

A

No, do not wet the product. Keep it in a dry place to avoid moisture entering the internal components and causing damage or short circuits.

Is this answer helpful?

A

There is a 3-year warranty excluding consumable parts subject to wear and tear unless there is a manufacturing defect in materials.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High capacity lithium battery lasts long
  • Three useful lighting modes for different times
  • Motion sensor covers a wide area distance
  • Durable aluminium body resists physical damage
  • Easy installation without tools needed
VS

Disadvantages

  • Manual USB charging requires cables separate
  • Battery not removable if defective internally
  • Adhesive strength may decrease over time
  • Do not install in damp locations allowed
  • Close proximity lights may interfere with each other
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Ceiling light, Wall light, Surface mount light

Integrated LEDs

Yes

Socket

No

Material

Plastic, Aluminum

Color

white

Design

Oblong

Features

Wall adhesive, Battery-operated, Switch, Integrated motion sensor, USB charging port

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Ksix LED Light Sophia

Lighting your home has never been more versatile or efficient with the Ksix LED light Sophia. This innovative device combines modern technology with a sleek design to provide powerful illumination wherever you need it most. Whether you are looking for motion-activated security lighting or a convenient handheld torch for outdoor activities, this product adapts to your specific requirements effortlessly. The comprehensive Ksix LED light Sophia Manual ensures you understand every function before installation to maximize safety and utility.

Powered by a robust internal lithium battery with a capacity of 1800mAh, this light offers extended usage without the need for frequent recharging cycles. The unit features 80 high-quality LEDs producing a bright 200 lumens output with a neutral 4000K color temperature. The durable white painted aluminium body ensures significant longevity while resisting typical wear and tear in various environments. Motion detection is central to its operation, offering a wide 120-degree range detectable up to five meters away for maximum coverage.

Users can easily switch between three distinct modes using the convenient side button interface. Night mode activates only when darkness is detected, emitting a blue indicator light during setup. Day mode lights up strictly upon detecting movement, clearly indicated by a red flashing signal. Fixed mode turns the device into a steady torch for general illumination tasks whenever needed. The charging process is straightforward via a micro USB port, taking approximately four to five hours to reach full capacity. Visual indicators show red for charging and blue when complete.

Installation is simple and requires no drilling or specialized tools. Adhesive metal parts allow for temporary magnetic attachment to flat surfaces after proper cleaning. Always refer to specific safety guidelines regarding damp locations and extreme heat exposure to prevent damage. Proper maintenance involves regular cleaning with a dry cloth to ensure optimal performance over time.

This LED solution represents a smart step towards home automation and energy efficiency. With a long lifespan guarantee on components, durability is assured for years of service. Please consult the documentation for full legal warranty details from Atlantis Internacional regarding the BXTILED60B model. Enjoy reliable, flexible lighting solutions today for your interior or exterior spaces.

Notes

Ensure surfaces are clean and dry before adhesive application to prevent peeling. Keep the product away from fire sources and direct sunlight to avoid battery degradation.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly