Manual.ly Logo

Ksix Sophia Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 24

Loading...
dfb7fa5426f94f2910b9a9962bac60bed564 page 6
Instructions for use
Press the side button for 3 seconds to turn on the light.
Press the side button for 1 second to change the lighting mode:
1. NIGHT MODE:
The sensor will emit a blue light flashing 6 times. Once this mode is activated, the light will
only turn on at night. It will not turn on during the day.
2. DAY MODE:
The sensor will emit a red light flashing 6 times. Once this mode is activated, the light will
only turn on when motion is detected.
3. FIXED MODE:
The sensor will not emit any light. Once this mode is activated, the light remains steady
and can be used as a torch.
Press the side button for 3 seconds to turn the light o.
Charging
Connect the micro USB charging cable included with the product to a computer or power
source with a USB A port.
Dierent lights will illuminate depending on the charging status:
• Charging: a steady red light will illuminate.
• Charging complete: the steady red light will change to blue. This indicates that charging
is complete.
• Low current protection: if the voltage connected to the light is below 2.7V, the red light
and blue light will flash 6 times at the same time and the light will turn o.
Installation
• Secure the 2 metal parts with adhesive on the back of the strip designed for this purpose
(they should be fixed like magnets).
• Find a flat surface and clean that area for better adhesion.
• Carefully remove the protective film from the adhesives on both metal parts and attach
the light to the desired surface.
• Separate the light from the metal parts to charge the light, clean it or transport it as a
torch.
Safety precautions
1. This product is powered by rechargeable battery.
2. Do not install this product in damp locations.
3. Do not expose the product to high temperatures or direct sunlight. It may aect the
proper operation of the product.
4. Do not install two lights too close together. The illumination of one light may aect the
operation of the other light.
5. Keep the product away from fire and water to avoid the risk of leakage or explosion.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to
unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Chat with your Ksix Sophia manual using AI

Get instant AI answers from your Ksix Sophia manual

Ask anything about the Ksix Sophia. Answers come from this manual, with the pages they are based on.

Sophia Maintenance Schedule

Regularly
Clean the product with a dry cloth

Ensure the product is disconnected or switched off before cleaning.

Regularly
Keep ports and connectors free from dust

Remove dust and lint to ensure proper connection.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Sophia?

Yes No

Frequently Asked Questions

A

Connect the included micro USB cable to a computer or power source. A red light indicates charging, and blue means full charge. Always disconnect if voltage is below 2.7V.

Is this answer helpful?

A

The sensor emits a blue light flashing 6 times. The lamp only turns on at night and stays off during the day to save energy.

Is this answer helpful?

A

Yes, but avoid damp locations directly. Keep it away from water to prevent leakage or explosion risks as per safety rules. Do not expose to high heat.

Is this answer helpful?

A

The device contains a 1800mAh lithium battery. It provides sufficient power for extended use before needing a recharge cycle of 4 to 5 hours.

Is this answer helpful?

A

Press the side button for 3 seconds. This will shut down the device regardless of the current active lighting mode.

Is this answer helpful?

A

No, do not wet the product. Keep it in a dry place to avoid moisture entering the internal components and causing damage or short circuits.

Is this answer helpful?

A

There is a 3-year warranty excluding consumable parts subject to wear and tear unless there is a manufacturing defect in materials.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High capacity lithium battery lasts long
  • Three useful lighting modes for different times
  • Motion sensor covers a wide area distance
  • Durable aluminium body resists physical damage
  • Easy installation without tools needed
VS

Disadvantages

  • Manual USB charging requires cables separate
  • Battery not removable if defective internally
  • Adhesive strength may decrease over time
  • Do not install in damp locations allowed
  • Close proximity lights may interfere with each other
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Ceiling light, Wall light, Surface mount light

Integrated LEDs

Yes

Socket

No

Material

Plastic, Aluminum

Color

white

Design

Oblong

Features

Wall adhesive, Battery-operated, Switch, Integrated motion sensor, USB charging port

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Ksix LED Light Sophia

Lighting your home has never been more versatile or efficient with the Ksix LED light Sophia. This innovative device combines modern technology with a sleek design to provide powerful illumination wherever you need it most. Whether you are looking for motion-activated security lighting or a convenient handheld torch for outdoor activities, this product adapts to your specific requirements effortlessly. The comprehensive Ksix LED light Sophia Manual ensures you understand every function before installation to maximize safety and utility.

Powered by a robust internal lithium battery with a capacity of 1800mAh, this light offers extended usage without the need for frequent recharging cycles. The unit features 80 high-quality LEDs producing a bright 200 lumens output with a neutral 4000K color temperature. The durable white painted aluminium body ensures significant longevity while resisting typical wear and tear in various environments. Motion detection is central to its operation, offering a wide 120-degree range detectable up to five meters away for maximum coverage.

Users can easily switch between three distinct modes using the convenient side button interface. Night mode activates only when darkness is detected, emitting a blue indicator light during setup. Day mode lights up strictly upon detecting movement, clearly indicated by a red flashing signal. Fixed mode turns the device into a steady torch for general illumination tasks whenever needed. The charging process is straightforward via a micro USB port, taking approximately four to five hours to reach full capacity. Visual indicators show red for charging and blue when complete.

Installation is simple and requires no drilling or specialized tools. Adhesive metal parts allow for temporary magnetic attachment to flat surfaces after proper cleaning. Always refer to specific safety guidelines regarding damp locations and extreme heat exposure to prevent damage. Proper maintenance involves regular cleaning with a dry cloth to ensure optimal performance over time.

This LED solution represents a smart step towards home automation and energy efficiency. With a long lifespan guarantee on components, durability is assured for years of service. Please consult the documentation for full legal warranty details from Atlantis Internacional regarding the BXTILED60B model. Enjoy reliable, flexible lighting solutions today for your interior or exterior spaces.

Notes

Ensure surfaces are clean and dry before adhesive application to prevent peeling. Keep the product away from fire sources and direct sunlight to avoid battery degradation.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly