Kranzle X Series Manual
PDF manual · 19 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kranzle X Series manual using AI
Get instant AI answers from your Kranzle X Series manual
Ask anything about the Kranzle X Series. Answers come from this manual, with the pages they are based on.
X Series Maintenance Schedule
Change oil annually or after 250 operating hours. The first oil change is due after about 50 operating hours; change immediately if oil is gray or white.
Have a qualified person inspect safe operation as needed, but at least every 12 months. Record the inspection results in writing.
Check the high-pressure hose, mains cable, and safety shut-off gun for damage. Replace defective or damaged components immediately.
Check the water inlet screen for cleanliness and damage. Rinse it thoroughly with clean water; do not operate without it or with a damaged filter.
Check the oil level using the dipstick. It must reach the upper edge of the OK marking.
Apply acid-free grease to the plug nipple regularly.
Engage the safety lock on the shut-off gun after every use to prevent unintentional spraying.
During shutdown, clean and coil the high-pressure hose and mains cable, and clean the water inlet filter.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend X Series?
Yes NoFrequently Asked Questions
The range includes the X A15 TST and X A17 TST electric high-pressure washers. Both use a mobile chassis, hose reel, pressure gauge, adjustable output, safety trigger gun, and Total Stop System.
Is this answer helpful?
The standard equipment includes a flat-fan nozzle for broader cleaning coverage and a dirt-killer nozzle for concentrated cleaning of stubborn grime. Both connect through the safety trigger gun coupling.
Is this answer helpful?
Only the X A15 TST supports direct suction. Use a suitable suction hose with filter, fill the pump and hose with water before first use, and draw only clean, non-chlorinated water without air entering the system.
Is this answer helpful?
The washer can be connected to cold water or water up to 60 C. Hot inlet water raises the temperature of metal components, so protective gloves are recommended when handling the unit.
Is this answer helpful?
When the main switch is on, pulling the trigger starts the motor through a pressure switch. Releasing the trigger stops water flow and shuts off the motor. This provides convenient, controlled operation.
Is this answer helpful?
Turn it off, stop the water supply, release pressure, lock the trigger gun, drain the pump, unplug it, clean and coil the hose and cable, clean the inlet filter, and store the unit in a frost-free place.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Compact, wheeled design with a chassis suited to uneven ground and stairs.
- Brass pump head, steel-braided 12 m hose, and organized onboard storage support durable daily use.
- Total Stop System stops the motor when the trigger is released, reducing unnecessary runtime.
- Adjustable pressure and water volume help match cleaning force to different surfaces.
- X A15 TST supports direct suction from clean water containers with the correct hose and filter.
Disadvantages
- Requires careful water-supply checks; insufficient flow can damage the pump through cavitation.
- The X A15 TST alone supports direct suction, so this feature is not available on every X-Serie model.
- High-pressure use demands protective equipment and careful distance control on sensitive surfaces.
- Hose length is limited to 20 m when extending the original hose.
- Regular oil checks, filter cleaning, frost protection, and periodic servicing are necessary.
Product Specification
Operating mode
Cold water
Mobility
Trolley
Fuel tank
No
Product Description
Kraenzle X-Serie Electric High-Pressure Washer
The Kraenzle X-Serie Electric High-Pressure Washer is built for users who expect dependable cleaning power in a compact, mobile format. Designed for demanding home, property, workshop, and light professional tasks, the X A15 TST and X A17 TST combine sturdy construction with practical controls for effective outdoor cleaning. Driveways, vehicles, patios, equipment, walls, and garden furniture can be refreshed with a focused water jet and a choice of spray patterns.
Built for Controlled Cleaning
A special brass pump head supports long-term durability, while the continuously adjustable pressure and water-volume control lets operators match the output to the surface. This is helpful when moving from resilient paving stones to more delicate vehicle panels or painted surfaces. The included flat-fan nozzle provides broad, even coverage, and the dirt-killer nozzle delivers a more concentrated action for stubborn soil.
The electric washer uses a Total Stop System that starts the motor when the trigger gun is opened and stops it when the trigger is released. This feature helps reduce unnecessary motor running and keeps operation straightforward. A pressure gauge gives a clear indication of working conditions, while the safety trigger gun is designed for controlled use.
Mobile Design and Useful Storage
The X-Serie has a robust wheeled chassis made to handle uneven ground and steps. Its ergonomic handle makes positioning easier around a work area. TST versions include a hose reel with a 12 m steel-braided high-pressure hose, helping keep the hose organized before, during, and after use. Integrated holders for the trigger gun, nozzles, cable, and accessories support a tidier setup.
The washer accepts cold water and inlet water up to 60 C, provided the supply meets the required flow and pressure conditions. The X A15 TST can also draw clean water from a separate container or pond when fitted with the appropriate suction hose and filter. This adds flexibility where a pressurized water connection is unavailable.
Safety and Care Matter
Correct setup is essential for reliable performance. Inspect the inlet filter, hose, cable, and connections before use, fully unwind the high-pressure hose, and avoid running the pump dry. Keep the spray away from people, animals, electrical equipment, and fragile surfaces. Protective clothing, eye protection, hearing protection, and stable footing are important during operation.
Regular care includes cleaning the water inlet filter, checking the oil level, draining the unit before freezing conditions, and using approved replacement parts. The first oil change is recommended after about 50 operating hours, followed by annual service or service every 250 hours.
Notes
- Use a residual-current device rated at 30 mA and a properly protected 16 A electrical supply.
- Maintain at least 30 cm from sensitive surfaces such as vehicle tires.
- Commercial units should receive a qualified safety inspection at least every 12 months.
Search for 67,706 Manuals online
Type-in Brand or Model