Manual.ly Logo

Kranzle Profi-Jet B 10/200 Manual

0.0 · 0 Ratings

PDF manual · 29 Pages

English

M: gpt-5.6-terra
page

/ 29

Loading...
12983ca9a51acec7dee20bae35984eef267b page a
General rules
The machine must be inspected according to the „Guidelines for Liquid Spray
Devices“ at least once every 12 months by a qualied person, to ensure that
continued safe operation is guaranteed. The results of the inspection are to be
recorded in writing. This may be done in any form.
Inspections:
The machine is designed for accidents to be impossible if used correctly. The
operator is to be notied of the risk of injury from hot machine parts and the
high pressure water jet. The „Guidelines for Liquid Spray Devices“ must be
complied with. (see page 12 and 13)
Accident prevention
Check the oil level with the oil-measuring stick prior to each use.
(Ensure horizontal position!)
Oil change B10/200 ; B13/150:
No oil change is required during the working life of the machine. However,
should it be necessary to change the oil in the event of repairwork, the oil sight
glass is to be opened over a reservoir and the machine to be emptied. The oil
is to be caught in the reservoir and disposed of in the approved manner.
New oil: 0,3 l - Motor oil W 15/40
Oil change B16/220;B 16/250; B 20/200
The oil of your high pressure pump should be changed after approx. 40 hours
of operation, or no later than when it takes an a grey or whitish colour. Open
the oilplug over a container and drain off all the oil. The oil must be caught in a
contianer and disposed of in a responsible, legal manner.
New oil: 1,0 l - Castrol Formula RS
Small repairs - Do it yourself !
Valve dirty or sticky !
Pressure gauge does not show full pressure.
Water comes out in spurts.
If you do not use the high pressure cleaner for some time the valves can stick.
Straighten a
paper clip...
the gauge
shows little
pressure or
no pressure
at all.
or the high
pressure
hose vibra-
tes!
Open the val-
ves with a socket
wrench...
remove the
valve screw, the
valve and the
O-ring.
Replace the rubber
O-ring.
and remove the
dirt from the valve
- the inside must
be closed.
Retighten the
valve screw,
and repeat an
all 6 valves.
Now it works
as well as
before.
The high-pressure hose
vibrates.
When a valve is blocked.
18
19

Chat with your Kranzle Profi-Jet B 10/200 manual using AI

Get instant AI answers from your Kranzle Profi-Jet B 10/200 manual

Ask anything about the Kranzle Profi-Jet B 10/200. Answers come from this manual, with the pages they are based on.

Profi-Jet B 10/200 Maintenance Schedule

Remind me when maintenance is due
Yearly
Professional safety inspection

A qualified person must inspect the machine every 12 months to ensure safe operation. Check safety features like the pressure gauge and safety valve, and record results in writing.

Show in the manual (page 10)
Every use
Check oil level

Check the oil level with the measuring stick prior to each use while ensuring the machine is in a horizontal position.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Profi-Jet B 10/200?

Yes No

Frequently Asked Questions

A

The Kranzle Profi-Jet B 10/200 provides continuously adjustable working pressure from 10 to 200 bar. Its permissible overpressure is 220 bar.

Is this answer helpful?

A

It is intended for demanding outdoor cleaning, including vehicles, patios, paving, facades, machinery, containers, agricultural areas, and similar hard surfaces.

Is this answer helpful?

A

Yes. The water inlet can accept water up to 60 C. Components can become hot at this temperature, so gloves should be used when handling the pump head or nearby parts.

Is this answer helpful?

A

Yes. The cleaner can receive pressurized water or draw clean water from a non-pressurized container. The maximum suction height for the B 10/200 is 1.0 meter.

Is this answer helpful?

A

The B 10/200 uses a Honda GX 200 gasoline engine. Engine-specific operation and maintenance should follow the Honda engine instructions.

Is this answer helpful?

A

Switch off the machine, close the water supply, release pressure through the gun, drain the pump briefly, clean the water filter, and store the unit in a frost-free location.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Adjustable 10-200 bar working pressure supports gentle rinsing and intensive cleaning.
  • Honda GX 200 gasoline engine enables operation away from electrical outlets.
  • 10 L/min water output offers effective performance for vehicles, patios, machinery, and outdoor surfaces.
  • Portable, wheeled, and hose-reel configurations provide flexible handling options.
VS

Disadvantages

  • Gasoline engine operation requires ventilation, fuel handling, and separation from flammable materials.
  • At approximately 35-44 kg depending on configuration, it may require effort to move or load.
  • The 103 dB(A) sound level calls for suitable hearing protection and considerate use.
  • Regular filter checks, oil monitoring, hose care, and frost-safe storage are necessary.
M: gpt-5.6-terra

Product Specification

Operating mode

Cold water

Power

6.44 hp, 196 cc, 4-stroke, Honda GX200LX

Pressure

435.11-2,900.75 psi

Flow rate

max. 158.5 gal/h

Inlet temperature

max. 140 F

Mobility

Carry handle

Fuel tank

No

Dimensions

20.47 x 16.54 x 14.17 in (W x H x D)

Weight

77.16 lb

Included

High-pressure gun (M2000), high-pressure hose (32.81 ft), 2 x lance/spray tube, water filter

M: gpt-5.6-terra

Product Description

Kranzle Profi-Jet B 10/200 Gasoline High-Pressure Cleaner

The Kranzle Profi-Jet B 10/200 Gasoline High-Pressure Cleaner is a portable, professional-grade cleaning machine designed for demanding outdoor work where electrical power may not be available. Its Honda GX 200 gasoline engine and high-pressure pump deliver adjustable working pressure from 10 to 200 bar, making it suitable for both controlled surface cleaning and stubborn grime removal.

With a water output of 10 liters per minute, this model combines practical flow with strong cleaning force. It is well suited to washing vehicles, paving, patios, machinery, containers, agricultural areas, and exterior surfaces. The pressure can be adjusted continuously at the control valve, allowing users to match the spray strength to the material and task.

Built for Mobile Cleaning

The B 10/200 is available in portable and wheeled configurations, with an optional hose-reel arrangement for more organized operation. A 10-meter high-pressure hose supports flexible movement around work areas, while the spray gun includes a safety trigger to control water flow. The standard setup includes a Vario-Jet lance and a Dirtkiller attachment for concentrated cleaning on heavily soiled surfaces.

The machine can be supplied from a pressurized water connection or can draw clean water from a suitable tank. It accepts cold water and water up to 60 C, although protective gloves are recommended when working with warm water. An integrated water filter helps protect the pump from particles, so checking and cleaning the filter before use is an important routine step.

Safety and Maintenance Considerations

High-pressure cleaning requires careful handling. Never aim the spray at people or animals, keep children away from the operating area, and lock the spray gun after use. The gasoline engine must run in a well-ventilated location, at least one meter away from buildings and flammable materials. Solvents, gasoline, oils, and similar liquids must never be drawn into the pump.

After cleaning, release pressure, disconnect the water supply, and run the pump briefly without hoses to remove remaining water. Frost protection is essential during storage. The pump oil level should be checked before operation, and commercial users should arrange a safety inspection at least every 12 months.

Notes

  • Use clean water and keep the inlet filter free of debris.
  • Use only approved hoses, guns, lances, and replacement parts.
  • Avoid driving over, twisting, or dragging the high-pressure hose across sharp edges.
  • Follow local water, wastewater, and environmental regulations during cleaning.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly