Manual.ly Logo

Kranzle Profi-Jet B 10/200 Manual

0.0 · 0 Ratings

PDF manual · 29 Pages

English

M: gpt-5.6-terra
page

/ 29

Loading...
12983ca9a51acec7dee20bae35984eef267b page 3
Description
For the motor follow the Honda operating manual only.
Motor-safety:
(see Honda operating manual)
Honda motors are safe and reliable if they are operated correctly. Read the opera-
ting manual carefully before using the motor and try to understand the contents of
the manual completely.
Not following this advice could lead to injuries or damage of the equip-
ment.
To avoid a possible re hazard and to ensure the necessary ventilation
the motor has to be operated at a distance of at least 1 m from buil-
dings and objects. Inammable objects have to be kept away from the
surrounding area of the motor.
Children and pets have to be kept away from the motor, as there is
a danger of suffering burns from hot motor parts and to be injured by
equipment driven by the motor.
Get to know the motor and especially learn how to switch it off quickly.
Do not allow persons to operate the motor who are not familiar with it.
When running your high pressure cleaner with hot water of 70° C raised
temperatures occur.
Do not touch the machine without safety gloves.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil
or similar liquid matter. Pay attention to the instructions of the manufac-
turers of the cleaning agents. The seals in the machine are not resistant
to solvents. The spray of solvents is inammable, explosive and poiso-
nous.
Neither set up and operate the machine in rooms where there is a risk
of re or explosion nor put it into puddles. Do not use the machine
under water.
CAUTION !
Setting up: Location
The machine can only be operated when the safety trigger is squeezed.
When the lever ist squeezed, the spray gun opens. The liquid is then pumped to
the nozzle. The spray pressure increases and quickly reaches the selected opera-
ting pressure.
When the trigger ist released, the trigger gun closes and any further spraying of
liquid from the lance ist stopped.
The increase in pressure when the trigger gun is closed causes the unloader
valve-safety valve to open. The pump remaines switched on and continues to
pump liquid through the pump at reducated pressure.
When the trigger gun ist opened, the unloader valve - safety valve closes and the
pump ressumes pressure spraying from the lance.
The trigger gun is a safety device. Repairs should only be performed
by qualied persons. Should replacement parts be required, use only
components authorized by the manufacturer.
Lance with trigger gun
The unloader valve - safety valve protects the machine from a build-up of excess
pressure, and is designed not to permit an excess pressure to be selected for
operating. The limit nut on the handle is sealed with a spray coating.
The operating pressure and spray rate can be steplessly adjusted by tuning the
handle.
Replacements, repairs, new adjustments and sealing should only be
performed by qualied persons.
Unloader valve - safety valve
Environmental, refuse disposal and water protection
regulations must be observed !
Water - and Cleang - Care System
Water can be connected at mains pressure to the high pressure pump or it can be
sucked directly from a storage tank.
The water is then forced under pressure by the high pressure pump to the lance.
The high pressure jet is formed by the nozzle at the end of the lance.
Cleaning and caring agents can be mixed with the water by a low pressure injec-
tor. (not with B10/200)
Description
4 5

Chat with your Kranzle Profi-Jet B 10/200 manual using AI

Get instant AI answers from your Kranzle Profi-Jet B 10/200 manual

Ask anything about the Kranzle Profi-Jet B 10/200. Answers come from this manual, with the pages they are based on.

Profi-Jet B 10/200 Maintenance Schedule

Remind me when maintenance is due
Yearly
Professional safety inspection

A qualified person must inspect the machine every 12 months to ensure safe operation. Check safety features like the pressure gauge and safety valve, and record results in writing.

Show in the manual (page 10)
Every use
Check oil level

Check the oil level with the measuring stick prior to each use while ensuring the machine is in a horizontal position.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Profi-Jet B 10/200?

Yes No

Frequently Asked Questions

A

The Kranzle Profi-Jet B 10/200 provides continuously adjustable working pressure from 10 to 200 bar. Its permissible overpressure is 220 bar.

Is this answer helpful?

A

It is intended for demanding outdoor cleaning, including vehicles, patios, paving, facades, machinery, containers, agricultural areas, and similar hard surfaces.

Is this answer helpful?

A

Yes. The water inlet can accept water up to 60 C. Components can become hot at this temperature, so gloves should be used when handling the pump head or nearby parts.

Is this answer helpful?

A

Yes. The cleaner can receive pressurized water or draw clean water from a non-pressurized container. The maximum suction height for the B 10/200 is 1.0 meter.

Is this answer helpful?

A

The B 10/200 uses a Honda GX 200 gasoline engine. Engine-specific operation and maintenance should follow the Honda engine instructions.

Is this answer helpful?

A

Switch off the machine, close the water supply, release pressure through the gun, drain the pump briefly, clean the water filter, and store the unit in a frost-free location.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Adjustable 10-200 bar working pressure supports gentle rinsing and intensive cleaning.
  • Honda GX 200 gasoline engine enables operation away from electrical outlets.
  • 10 L/min water output offers effective performance for vehicles, patios, machinery, and outdoor surfaces.
  • Portable, wheeled, and hose-reel configurations provide flexible handling options.
VS

Disadvantages

  • Gasoline engine operation requires ventilation, fuel handling, and separation from flammable materials.
  • At approximately 35-44 kg depending on configuration, it may require effort to move or load.
  • The 103 dB(A) sound level calls for suitable hearing protection and considerate use.
  • Regular filter checks, oil monitoring, hose care, and frost-safe storage are necessary.
M: gpt-5.6-terra

Product Specification

Operating mode

Cold water

Power

6.44 hp, 196 cc, 4-stroke, Honda GX200LX

Pressure

435.11-2,900.75 psi

Flow rate

max. 158.5 gal/h

Inlet temperature

max. 140 F

Mobility

Carry handle

Fuel tank

No

Dimensions

20.47 x 16.54 x 14.17 in (W x H x D)

Weight

77.16 lb

Included

High-pressure gun (M2000), high-pressure hose (32.81 ft), 2 x lance/spray tube, water filter

M: gpt-5.6-terra

Product Description

Kranzle Profi-Jet B 10/200 Gasoline High-Pressure Cleaner

The Kranzle Profi-Jet B 10/200 Gasoline High-Pressure Cleaner is a portable, professional-grade cleaning machine designed for demanding outdoor work where electrical power may not be available. Its Honda GX 200 gasoline engine and high-pressure pump deliver adjustable working pressure from 10 to 200 bar, making it suitable for both controlled surface cleaning and stubborn grime removal.

With a water output of 10 liters per minute, this model combines practical flow with strong cleaning force. It is well suited to washing vehicles, paving, patios, machinery, containers, agricultural areas, and exterior surfaces. The pressure can be adjusted continuously at the control valve, allowing users to match the spray strength to the material and task.

Built for Mobile Cleaning

The B 10/200 is available in portable and wheeled configurations, with an optional hose-reel arrangement for more organized operation. A 10-meter high-pressure hose supports flexible movement around work areas, while the spray gun includes a safety trigger to control water flow. The standard setup includes a Vario-Jet lance and a Dirtkiller attachment for concentrated cleaning on heavily soiled surfaces.

The machine can be supplied from a pressurized water connection or can draw clean water from a suitable tank. It accepts cold water and water up to 60 C, although protective gloves are recommended when working with warm water. An integrated water filter helps protect the pump from particles, so checking and cleaning the filter before use is an important routine step.

Safety and Maintenance Considerations

High-pressure cleaning requires careful handling. Never aim the spray at people or animals, keep children away from the operating area, and lock the spray gun after use. The gasoline engine must run in a well-ventilated location, at least one meter away from buildings and flammable materials. Solvents, gasoline, oils, and similar liquids must never be drawn into the pump.

After cleaning, release pressure, disconnect the water supply, and run the pump briefly without hoses to remove remaining water. Frost protection is essential during storage. The pump oil level should be checked before operation, and commercial users should arrange a safety inspection at least every 12 months.

Notes

  • Use clean water and keep the inlet filter free of debris.
  • Use only approved hoses, guns, lances, and replacement parts.
  • Avoid driving over, twisting, or dragging the high-pressure hose across sharp edges.
  • Follow local water, wastewater, and environmental regulations during cleaning.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly