Kramer Tavor 5-O Manual
PDF manual · 16 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kramer Tavor 5-O manual using AI
Get instant AI answers from your Kramer Tavor 5-O manual
Ask anything about the Kramer Tavor 5-O. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Tavor 5-O?
Yes NoFrequently Asked Questions
The Tavor 5-O accepts three line‑level inputs: an unbalanced 3.5mm mini jack, an unbalanced pair of RCA connectors, and a balanced stereo input via a 5‑pin terminal block. Inputs can be used separately or mixed.
Is this answer helpful?
The active (left) speaker includes speaker-out connectors which feed the passive (right) speaker using the supplied loudspeaker cable. The active unit provides amplification and control for the pair.
Is this answer helpful?
Yes. The active speaker has a 3.5mm loop output to chain additional active speakers and a 3.5mm subwoofer output to connect an active subwoofer for enhanced bass response.
Is this answer helpful?
The speakers include U-shaped rotating steel brackets allowing vertical or horizontal on‑wall mounting and aiming. Mounting requires solid substrates such as wood studs, brick, concrete, or hollow blocks; gypsum-only walls are not recommended.
Is this answer helpful?
The unit uses a self-adjusting 90–240V AC power supply and features a POWER switch with an AUTO standby mode. In AUTO, the speaker enters standby after ~10 minutes idle and wakes automatically on detected input signal.
Is this answer helpful?
Rear-panel knobs provide VOLUME, BASS, and TREBLE adjustments, allowing basic tonal shaping and level control for the entire speaker pair.
Is this answer helpful?
Expect 2 x 30W RMS output, frequency response roughly 45Hz–20kHz (-10dB), sensitivity about 85 dB SPL (1W/1m), and continuous max SPL near 105 dB—suitable for clear speech and music in small to medium rooms.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Integrated 2x30W RMS amplifier eliminates need for external amp.
- Multiple input options (3.5mm, RCA, balanced terminal block) for flexible connections.
- Loop output for easy chaining of additional speaker pairs.
- Compact on-wall design with rotating mounting brackets for directional aiming.
- Universal 90–240V power with AUTO standby for energy savings.
Disadvantages
- Not suitable for mounting on gypsum-only walls—requires solid backing.
- Limited low-end extension without an external subwoofer for deep bass.
- Sensitivity (85 dB) better suited to small-to-medium rooms, not large venues.
- Passive speaker relies on wired connection to active unit, limiting placement.
- Controls are on the rear panel, which can be less convenient after mounting.
Product Specification
Principle
2-Way
Tweeter
1 x 0.50"
Woofer
1 x 5.25"
Amplification
active
Frequency Range
100Hz-20kHz (+-3dB)
Power
60W RMS, 160W Peak
SPL max.
105dB
Dimensions
7.20x9.61x6.69in (WxHxD)
Weight
6.83 lb
Product Description
Kramer Tavor 5-O — On-Wall Active Speaker Pair
The Kramer Tavor 5-O is a compact, powered two-way on-wall speaker system designed for versatile indoor audio applications such as home theater, conference rooms, classrooms, and presentation venues. Each pair includes an active left speaker with a built-in amplifier and a passive right speaker. The active unit accepts multiple line-level inputs, drives the passive speaker, and provides outputs for chaining additional speakers or connecting an external subwoofer.
Design and Features
The Tavor 5-O combines practical mounting hardware and a refined acoustic design in an ABS cabinet with an aluminum grille and steel brackets. It houses a 5¼" polypropylene woofer and a Mylar dome tweeter, tuned with a bass-reflex enclosure. The integrated amplifier delivers 2 x 30W RMS (2 x 80W program) with a frequency response that covers typical listening ranges and a nominal sensitivity suited for near-field to small-room applications.
Multiple input options—3.5mm mini jack, balanced terminal block, and RCA—allow flexible source connections. The active speaker provides a speaker-out to the passive unit, a loop output to chain more active speakers, and a subwoofer out for enhanced low-frequency extension. Rear-panel controls include volume, bass, and treble, plus a power switch with an AUTO standby mode that wakes on input signal. The power supply is universal (90–240V AC).
Installation and Use
The speakers are intended for indoor wall mounting, vertically or horizontally, using included U-shaped rotating brackets that allow aiming and left/right rotation. Mounting requires suitable solid wall substrates (wood studs, brick, concrete) and avoidance of gypsum-only surfaces or obstructed locations. Cables shipped with the unit include power and speaker leads plus a 3.5mm-to-RCA cable; use good-quality interconnects to minimize noise and interference. The loop output enables simple expansion by daisy-chaining additional active/passive speaker pairs.
Performance and Practicalities
With a measured sensitivity around 85 dB SPL (1W/1m), a max SPL near 105–110 dB, and low distortion figures (<0.2%), the Tavor 5-O is optimized for clear speech and program material in small-to-medium rooms. It includes magnetic shielding for placement near displays and an auto-power shutoff for energy savings. The solid build and included mounting kit make it a practical solution where discreet, wall-mounted stereo or distributed audio is needed.
Notes:
- Use quality cables and avoid tight cable bundles to minimize noise.
- Do not mount on gypsum-only walls; verify wall structure before installation.
- The speaker pair ships with power and interconnect cables and rotating mounting brackets.
Search for 67,706 Manuals online
Type-in Brand or Model