Manual.ly Logo

Kerbl Automatic Chicken Door Control 70550 Manual

0.0 · 0 Ratings

PDF manual · 80 Pages

English

M: OA-GPT-5-NAN
page

/ 80

Loading...
46b6a8a59b3a9d061400738784c21b2ae5b6 page 10
16
7. Bringing into operation
CAUTION!
Risk of physical injury and material damage if used incorrectly!
• Installations on the 230 Volt network must only be carried out by qualified electricians.
• Route the cable to the automatic chicken door with protection so that the animals are unable toreach it.
• If the device is supplied with power from the power pack, the battery is not used. However you should replace the battery at regular intervals
since otherwise there is a risk that the battery mayleak. Spent batteries and the device itself
should be disposed of properly without delay.
• First close the housing before connecting the mains plug to the socket! Always disconnect the
mains plug from the socket if you are opening the housing (for example also if you want to insert
the light sensor).
To supply the device with the power it requires, connect either the power pack to the device
and plug it into a 230 Volt mains socket or insert the battery into the device. You can also choose
both supply methods to be prepared for a power failure. Connect battery connection wires to
the corresponding plug.
Open and close the door a few times to ensure it is operating smoothly. You can now make
the relevant settings, as described below.
8. Operation
8.1 Time setting
To set the current date and time, press the OK button for around 3 seconds. The year
currently set starts to flash. Change the value using the arrow buttons and confirm the
year setting with the OK button. The date then flashes with the month and day. Change
the value of the date using the arrow buttons. The example shown is 08.06.
The next confirmation takes you to the setting for the current time.
Change the value of the time using the arrow buttons. Exit the Settings menu with the Menu button.
8.2 Automatic opening and closing with the timer switch
You can set an opening and closing time for week days (Monday - Friday) and weekends (Saturday + Sunday). Please note that the door will
only open or close at the specified times if automatic mode is active.
8.2.1 Setting the opening and closing times
To set the times, press the Menu button for around 3 seconds. The opening time for week
days setting appears. The opening time is indicated by the
symbol on the right side of
the display. Use the arrow buttons to select your desired opening time and confirm the
input with the OK button.
The closing time for week days setting then appears. The closing time is indicated by
the
symbol on the right side of the display. Use the arrow buttons to select your desired
closing time and confirm the input with the OK button.
Month Day
1 2 3 4 5

Chat with your Kerbl Automatic Chicken Door Control 70550 manual using AI

Get instant AI answers from your Kerbl Automatic Chicken Door Control 70550 manual

Ask anything about the Kerbl Automatic Chicken Door Control 70550. Answers come from this manual, with the pages they are based on.

Automatic Chicken Door Control 70550 Maintenance Schedule

Remind me when maintenance is due
Regularly
Thoroughly clean the device and guide rails

Disconnect the mains plug before cleaning. Keep the door running freely; remove dirt and objects from the closing area and lubricate guide rails if needed.

Show in the manual (page 18)
Regularly
Inspect the pull cord for wear

Check the cord for abrasion and replace it in good time with replacement cord ref. 70552.

Show in the manual (page 18)
Regularly
Replace the batteries

Replace batteries at regular intervals even when using the power pack, to prevent battery leakage.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend Automatic Chicken Door Control 70550?

Yes No

Frequently Asked Questions

A

It accepts a 230 V mains adapter and four AA batteries. You can use either supply or both in parallel so batteries act as a backup during mains failure.

Is this answer helpful?

A

Press and hold the Menu button for about 3 seconds to enter time settings. Use the arrow keys to set weekday open/close times, then weekend open/close times. Confirm each value with OK.

Is this answer helpful?

A

Both can be active: scheduled close times always execute regardless of light; scheduled open times wait until the sensor detects sufficient brightness. The sensor waits ~1 minute before reacting to avoid transient flashes.

Is this answer helpful?

A

Ensure the slider weight is sufficient (min 0.5 kg) and not jammed; align guide rails, clean and lubricate tracks, or add weight to the door if it’s too light.

Is this answer helpful?

A

Press Up when the door is open or Down when closed to reactivate automatic mode. If AC ON is enabled, the controller can also auto-return to automatic mode on the next daily cycle.

Is this answer helpful?

A

Mount it where it sees unobstructed daylight, away from artificial lights, streetlamps, vehicle headlights or reflections that could influence readings.

Is this answer helpful?

A

Regularly clean and lubricate guide rails, remove debris from the door path, inspect and replace the pull cord if worn (use spare Art. 70552), and change batteries when the display shows a battery symbol.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual power options (230 V adapter + batteries) with backup capability
  • Supports both timed schedules and light-sensor automation with adjustable threshold
  • Simple user interface with display and dedicated buttons for easy configuration
  • Compact electronics unit with supplied mounting and pulley accessories
  • Clear safety and maintenance guidance plus compatibility with original spare parts
VS

Disadvantages

  • Requires correct mechanical setup (slider alignment, weight 0.5–2.5 kg) to function reliably
  • Mains installations must be performed by a qualified electrician
  • Light sensor can be affected by artificial or stray light if poorly positioned
  • External pushbutton cannot re-enable automatic mode — must use unit buttons
  • Power adapter is not moisture-protected, needs dry sheltered outlet
M: OA-GPT-5-NAN

Product Specification

Suitability

Chickens

M: OA-GPT-54-NAN

Product Description

Kerbl Automatic Chicken Door — Kerbl Automatic Chicken Door Manual

The Kerbl Automatic Chicken Door is a reliable, user-friendly controller designed to automate vertical sliding coop doors (compatible with Kerbl sliders such as Art. 70560, 70570, 70580). It operates the door via a pull cord and can be powered by the included 230 V adapter, batteries (4×AA, preinstalled) or both in parallel for backup. The unit senses ambient light with a supplied sensor and also supports programmable open/close times for weekdays and weekends. A clear display and tactile buttons (Menu, OK, Up, Down) let you set date/time, configure schedules, adjust light-thresholds using an internal dial, and switch between automatic and manual modes.

Installation and setup are straightforward but require planning: select a sheltered, level mounting area, ensure the slider moves freely and weighs between 0.5–2.5 kg, route the cord without friction using supplied pulleys if needed, and fasten the electronics upright with the cord outlet downward. During hookup, move the electronics to the upper end position, set the slider to its upper stop (leave ~50 mm clearance), attach and knot the cord, then trim the excess. For mains installations, have a qualified electrician handle wiring and place the mains adapter in a dry protected outlet.

Operation covers timed automation and light-based control. You can assign independent open/close times for weekdays and weekends, and enable an AC ON option so the controller re-enters automatic mode on the next daily cycle after manual intervention. The light sensor lets the door open/close based on dawn/dusk conditions; the sensor ignores transient flashes by waiting about one minute before reacting. If both timer and light sensor are active, scheduled close times always take precedence, while scheduled open times wait for sufficient light. Manual control is available via on-unit Up/Down buttons or an optional external pushbutton (external button triggers manual mode but cannot re-enable automatic mode). A battery symbol on the display warns when cells need replacing; after battery replacement re-enter date/time.

Maintenance is minimal: keep guide rails clean and lubricated, inspect and replace the pull cord (spare Art. 70552) if abraded, and remove dirt from the door path to avoid motor strain. For faults, consult the troubleshooting table (timer off, light-sensor adjustments, insufficient door weight, obstructions, or incorrect clock settings). Only original spare parts should be used; repairs and mains-cable replacements must be done by qualified electricians or the manufacturer.

Notes:

  • Max slider weight 2.5 kg, min 0.5 kg; keep slider movement smooth.
  • Use the light-sensor adjustment wheel to fine-tune dawn/dusk thresholds.
  • Dispose of the unit and batteries per local e-waste regulations; do not place in household trash.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly