Jonsbo D500 Manual
PDF manual · 14 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Jonsbo D500 manual using AI
Get instant AI answers from your Jonsbo D500 manual
Ask anything about the Jonsbo D500. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend D500?
Yes NoFrequently Asked Questions
Graphics cards can be installed up to 480 millimeters in length, depending on whether hard drives are being used in the horizontal bay.
Is this answer helpful?
The case supports ITX, M-ATX, ATX, and EATX motherboards with a maximum size of 305 x 280 millimeters for the motherboard tray.
Is this answer helpful?
Power supplies up to 220 millimeters in length are supported within the designated PSU compartment area of the chassis.
Is this answer helpful?
Yes, the internal layout features an interchangeable design that allows you to reorient the motherboard and power supply compartments.
Is this answer helpful?
There are eight horizontal expansion slots available plus three additional slots that support vertical PCI-E riser cable configurations.
Is this answer helpful?
You can mount a 420mm radiator at the front or top, or a 360mm radiator at the top or front for dual setup flexibility.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Massive storage capacity with ten 3.5-inch hard drive slots and one 2.5-inch SSD slot
- Dual liquid cooling support with 420mm or 360mm radiators at front or top locations
- Interchangeable motherboard and PSU compartment layouts for flexible internal configurations
- Supports graphics cards up to 480mm in length for high-end GPU requirements
Disadvantages
- Large physical dimensions require ample desk space and a large room for setup
- Riser cable for vertical GPU mounting is sold separately and not included with case
- Radiator support thickness is limited to 57mm total height if horizontal hard drives are used
Product Specification
External Drive Bay
1x 5.25"
Internal Drive Bay
8x 2.5"/3.5", 2x 3.5", 3x 2.5"
Ports
1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 2x USB-A 3.0 (5Gb/s), 1x 3.5mm Jack (Line-Out), 1x 3.5mm Jack (Line-In)
PCI Slots
11 (3x Riser Card)
Fan (Front)
2x 4.72" or 3x 5.51" (optional)
Fan (Rear)
1x 4.72" (RGB illuminated) or 1x 5.51" (optional)
Fan (Left)
N/A
Fan (Right)
N/A
Fan (Top)
3x 5.51" (optional)
Fan (Bottom)
N/A
Fan (Other)
N/A
Radiator Sizes
4.72"/9.45"/11.02"/14.17"/16.54" front, 4.72"/9.45"/11.02"/14.17"/16.54" top, 4.72"/5.51" rear
Motherboard
Up to ATX (E-ATX with unknown dimensions possible)
Supported Motherboards
Mini-ITX (6.7"x6.7")/mATX (9.6"x9.6")/ATX (12"x9.6")/E-ATX (unknown dimensions)
Power Supply
ATX (max. 8.66" deep)
Power Supply Position
Bottom
CPU Cooler
max. 7.48" height
Graphics Cards
max. 18.90"
Lighting
RGB Header 3-Pin ARGB (+5V/DATA/GND), integrated LED controller, integrated RGB LED lighting, illuminated fans
Dimensions (WxHxD)
9.84"x23.07"x24.41"
Volume
3.21 cu ft
Weight
38.58 lbs
Case Type
Big Tower
Front
Mesh, internal dust filter, removable cover
Top
Partially closed, Mesh, mostly vent grilles, internal dust filter, removable cover
Bottom
Partially closed, mostly vent grilles, external dust filter
Left
Closed, Glass
Right
Closed
Back
Partially closed, vent grilles top right, PCI Slots (8x horizontal, 3x vertical)
Front I/O Position
Case Side: Front, Height: Top, Position: Center
Features
Cable management, dust filter, graphics card vertical mount supported, graphics card holder, glass window
Note on E-ATX
Motherboard and case manufacturers designate different dimensions as E-ATX. This manufacturer provides no specifications for supported E-ATX dimensions. Motherboards with E-ATX/SSI EEB dimensions of 12.01"x13.00" or 12"x13" may not be supported.
USB Labeling
Left
Product Description
The Ultimate Tower for Custom Builds
The Jonsbo D500 stands as a beacon for enthusiasts seeking massive expandability within a standard tower footprint. When you are looking at the Jonsbo D500 Manual, you discover a wealth of configuration options that cater to high-end data workstations and gaming rigs alike. This chassis is designed with a focus on thermal performance and extreme storage capacity. It accommodates everything from entry-level components to server-grade hardware without compromising overall airflow or structural integrity. The sheer volume of the enclosure allows for a level of customization rarely found in mid-range cases.
Cooling Capabilities
Thermal management is paramount in this specific design. The chassis supports extensive liquid cooling setups including large water blocks. Users can install either a 420mm or 360mm radiator at the front or top of the unit. Interestingly, the design notes that position flexibility allows for maximizing cooling potential while managing internal space constraints. Front mounting offers robust intake, while top mounting utilizes positive pressure for heat expulsion effectively. Air cooling is also viable with provisions for up to three 140mm front fans and additional top or rear units depending on radiator selection and HDD presence. If you install a horizontal hard drive rack, be aware that the radiator support thickness limit increases to 57 millimeters total height on the front.
Storage and Expansion
Storage expansion is where this unit truly shines for professionals. The internal layout provides space for ten 3.5-inch hard drives alongside a dedicated slot for a 2.5-inch SSD. This makes it perfect for media servers, NAS builds, or large video editing archives requiring significant local storage. The layout is not static and offers significant freedom. A unique feature allows for interchangeable motherboard and power supply compartment layouts to suit various builder needs. For graphics cards, support extends well beyond standard lengths up to 480 millimeters depending on drive installation. Vertical GPU mounting is supported for clean aesthetic builds using a riser cable sold separately.
Assembly and Design
Accessibility is high for the advanced builder preparing to assemble the system. Side panels and internal trays slide out for easy access during component swapping or upgrades. The PSU location can be flipped to accommodate different cable management strategies effectively. While assembly requires attention to detail regarding the specific fan positions, the flexibility ensures every component fits perfectly during the process. Power supplies up to 220mm in length are supported, though some standard ATX units might be longer. Always verify your specific hardware dimensions against the provided specifications before purchase to ensure a seamless integration into your custom workstation without unexpected fitment issues.
Motherboard Support
The unit supports ITX, M-ATX, ATX, and EATX form factors with max dimensions of 305 by 280 millimeters. This wide range ensures compatibility with most modern consumer and workstation motherboards on the market today. Eight horizontal expansion slots plus three vertical slots accommodate diverse networking and graphics needs for a versatile system setup.
Search for 67,706 Manuals online
Type-in Brand or Model