Jonsbo D31 Manual
PDF manual · 16 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Jonsbo D31 manual using AI
Get instant AI answers from your Jonsbo D31 manual
Ask anything about the Jonsbo D31. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend D31?
Yes NoFrequently Asked Questions
The D31 supports Mini-ITX and Micro-ATX (M-ATX) motherboards, designed to accommodate both small-form-factor and compact mid-size boards while keeping internal layout flexible for cooling and drives.
Is this answer helpful?
Yes, but compatibility depends on PSU position and any radiator or fan configuration. Graphics cards can fit roughly 330–400mm depending on PSU rack level. ATX or SFX PSUs up to ~220mm are supported but may reduce GPU clearance.
Is this answer helpful?
Radiator support includes top 240/280/360mm, bottom 240/360mm and rear 120mm. Fan mounts accept multiples of 120mm and 140mm in top/bottom positions (top: up to three 120mm or two 140mm). Cooling choices affect PSU and GPU layout.
Is this answer helpful?
Yes, a screened version exists. If using that model, consult the screen manual first and pre-install HDMI and Type-C cables before installing the motherboard to ensure proper routing and connection.
Is this answer helpful?
The D31 supports two 2.5" SSDs and one 3.5" HDD natively. Mounting hardware and grommets are included for secure drive installation and vibration reduction.
Is this answer helpful?
Front I/O includes one USB 3.2 Gen 2 Type-C port, one USB 3.0 port, and a combined audio/microphone jack, offering modern connectivity for peripherals and external displays.
Is this answer helpful?
Yes. The case includes standoffs, screws for motherboard/SSDs/HDDs, cable ties, rubber grommets, dust filter, spare panel clips and a hex socket to simplify assembly and tidy cabling behind the motherboard tray.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports Mini-ITX and M-ATX boards while remaining compact (205×363×452mm).
- Flexible PSU rack with four height positions to trade off PSU length and GPU clearance.
- Generous cooling/radiator support: top 240/280/360mm, bottom 240/360mm, rear 120mm.
- Front I/O with USB 3.2 Gen 2 Type-C plus USB 3.0 and audio for modern connectivity.
- Includes full accessory kit and practical mounting features (grommets, dust filter).
Disadvantages
- GPU length limit depends on PSU position and radiator configuration, adding planning complexity.
- Screened version requires extra cable pre-routing and following a separate display manual.
- Large cooling setups (360 AIO) may force shorter PSU choices to preserve GPU space.
- Front fan space limited (single 120mm optional) — may constrain intake airflow for high-end builds.
- Some installation positions and adjustments can be fiddly in a compact interior.
Product Specification
External
N/A
Internal
1x 3.5", 2x 2.5"
Ports
1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 1x USB-A 3.0 (5Gb/s), 1x 3.5mm jack (Line-In/Out)
PCI slots
4
Fan (front)
1x 4.72in (optional)
Fan (rear)
1x 4.72in (optional)
Fan (left)
N/A
Fan (right)
N/A
Fan (top)
3x 4.72in (optional) or 2x 5.51in (optional)
Fan (bottom)
3x 4.72in (optional) or 2x 5.51in (optional)
Fan (other)
N/A
Radiator sizes
N/A front, 4.72/5.51/9.45/11.02/14.17in top, 4.72in rear, 4.72/9.45/14.17in bottom
Motherboard
up to uATX
Supported motherboards
Mini-ITX (6.7"x6.7")/Mini-DTX (8"x6.7")/uATX (9.6"x9.6")
Power supply
ATX (max. 8.66in deep)
Power supply position
front (vertical)
CPU cooler
max. 6.61in height
Graphics cards
max. 15.75in (with PSU <= 5.51in, 14.17in with PSU <= 5.91in, 14.17in with PSU = 7.09in)
Lighting
without lighting
Dimensions (WxHxD)
8.07x14.29x17.80in
Volume
8.89gal
Case type
Mini-Tower
Top
partially closed, Mesh, mostly fan grille
Bottom
partially closed, mostly fan grille, dust filter outside
Left
closed, glass
Right
closed
Rear
partially closed, fan grille right center, PCI slots bottom (4x horizontal)
Front I/O Position
Case side: Front, Height: bottom, Position: right
USB notation
Link
Product Description
Jonsbo D31 — Compact, Flexible Mini-ITX/M-ATX Tower
The Jonsbo D31 is a compact mid-tower that blends flexible hardware compatibility with a clean, modern aesthetic. Designed for small-form-factor builds, it supports Mini-ITX and M-ATX motherboards and offers multiple configurations for cooling, storage and power placement. Buyers can choose between a version with an integrated display or a standard model; screen-equipped variants require separate reference to the display instructions before motherboard installation. For screen models, pre-routing HDMI and USB-C (Type-C) cables is recommended prior to fitting the motherboard.
Despite its modest footprint (205mm W × 363mm H × 452mm D), the D31 accommodates robust components: up to two 2.5" SSDs and one 3.5" HDD, CPU coolers up to 168mm tall, and graphics cards roughly 330–400mm depending on PSU placement. The case accepts ATX or SFX PSUs (max 220mm length, subject to compartment position) and offers a four-level adjustable PSU rack to balance PSU length against GPU clearance. When fitted with a 360mm AIO under the top cover, a shorter PSU (around 140mm) is recommended to maximize GPU length.
Cooling support is versatile: front, top and bottom fan mounts plus rear fan and multi-size radiator support (top 240/280/360mm, bottom 240/360mm, rear 120mm). Fan and radiator mounting positions are flexible but may affect PSU placement and GPU length limits. Front I/O includes USB 3.2 Gen 2 Type-C, USB 3.0, and audio/mic ports for modern connectivity. The design includes practical details like cable-tie points, HDD rubber grommets, spare panel mounting clips, and a dust filter.
Installation is user-focused: removable side, inner side and top panels, a detachable power supply bracket, and clear guidance for pre-installing cables and routing fan leads behind the motherboard tray. The PSU mount features four hanging positions to optimize space; for example, installing three 120mm top fans may force the PSU to a different level. The case supplies a full accessory kit (standoffs, screws for motherboard/SSDs/HDDs, cable ties, hex socket, LED/switch connectors) to simplify assembly.
Overall, the Jonsbo D31 targets builders who want a compact, configurable chassis capable of housing capable GPUs and substantial cooling while offering tidy cable management and modern I/O.
Notes
- Pre-install HDMI and Type-C cables for screen versions before seating the motherboard.
- PSU placement affects maximum GPU length; check desired radiator/fan configuration first.
- Use provided rubber grommets and cable ties to reduce vibration and tidy cabling.
Search for 67,706 Manuals online
Type-in Brand or Model