Manual.ly Logo

JBL Aquaristic ProFlora pH Control Touch Manual

0.0 · 0 Ratings

PDF manual · 278 Pages

English

M: QW-35-FL
page

/ 278

Loading...
f081a659e5a8ce5a2b8e68140df20d40724e page 2b
39
OFFSET
Sensor voltage at pH 7.00 is
outside the range: sensor too old,
cable faulty, no sensor connected
or initially calibrated with buer
solution 4.00 by accident.
Check sensor cable for damage,
connect sensor correctly and
repeat calibration (starting
with buer solution 7.00!). If
unsuccessful, connect new sensor
and calibrate.
UNSTAB
Unstable sensor voltage: sensor tip
very dirty, electrolyte leaked out of
sensor or sensor tip broken o.
Clean sensor tip, place in storage
solution for 24 hours, then
calibrate. If unsuccessful, connect
new sensor and calibrate.

Return function
If no key is pressed for 30 seconds the display automatically returns to the value overview.
Any values not conrmed by OK will not have been stored.

Sleep mode
If no key is pressed for 10 minutes, the display backlighting fades to the lowest setting. When
a key is activated, the display is lit with the brightness level previously set.

Cleaning
The surface of the device may be cleaned with a soft, slightly damp cloth. Do not use
cleaning agents. Do not immerse the device in water.

Power failure
In the event of power failure, all values previously set remain stored. Only the time
calculation for the calibration reminder is disrupted.

Use of JBL PROFLORA pH Control Touch in combination with
calcium reactors in saltwater
Calcium reactors are tasked with dissolving the calcium oxide from the substrate within the
reactor (e.g. coral sand), and returning it as carbonate hardness into the saltwater aquarium.
Thus it counteracts the consumption of KH in the aquarium and no KH supplements have
to be added. The KH of natural saltwater in the oceans is between 6 and 9 °dKH, depending
on the ocean. CO is the best means to eectively dissolve KH from the substrate. This
process requires a pH level of approx. 6.5 inside the calcium reactor, which needs continuous
monitoring.
For calcium reactors which have an opening for pH sensors, this is very easy. All you have to
do is install the pH sensor there and set the pH set point on the JBL PROFLORA pH Control
Touch to 6.5 (see chapter 7.4). The connecting cable for the solenoid valve has to connect the
solenoid valve to the CO system, which introduces the CO into the calcium reactor.
DE
UK
FR
NL
IT
ES
PT
SE
CZ
PL
RU
RO
TR

Chat with your JBL Aquaristic ProFlora pH Control Touch manual using AI

Get instant AI answers from your JBL Aquaristic ProFlora pH Control Touch manual

Ask anything about the JBL Aquaristic ProFlora pH Control Touch. Answers come from this manual, with the pages they are based on.

ProFlora pH Control Touch Maintenance Schedule

Remind me when maintenance is due
Monthly
Calibrate the pH sensor

Perform a two-point calibration using buffer solutions pH 7.00 and then pH 4.00. The manual recommends calibrating every 30 days for reliable measurements.

Show in the manual (page 35)
Before each calibration
Store sensor in revitalization solution

Place the sensor tip in JBL Storage and Revitalisation Solution for 12-24 hours before each calibration to extend service life.

Show in the manual (page 45)
Regularly
Clean device surface

Wipe the surface of the device with a soft, slightly damp cloth. Do not use cleaning agents or immerse the device in water.

Show in the manual (page 43)
As needed
Check sensor cable and connections

Inspect the sensor cable for damage and ensure the sensor is connected correctly if unstable readings or errors occur.

Show in the manual (page 43)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ProFlora pH Control Touch?

Yes No

Frequently Asked Questions

A

First fill cuvettes with buffer solutions pH 7.00 and pH 4.00 plus deionized water. Submerge both pH and temperature sensors in distilled water first. Follow on-screen prompts to dip sensors into buffer solutions sequentially. Always start with pH 7.00 then move to 4.00 never reverse order. Confirm completion once both solutions show OK status on display.

Is this answer helpful?

A

It is designed specifically for JBL PROFLORA v002 magnet valves or CO2 kits containing such valves. While third party valves might physically connect, communication protocols may differ. Using compatible hardware ensures reliable operation and warranty coverage remains intact for the control unit.

Is this answer helpful?

A

All previously set values remain stored in memory during interruptions. Only the timer calculation for calibration reminders pauses until power returns. Once electricity resumes the device continues functioning with original configuration parameters preserved automatically.

Is this answer helpful?

A

Calibration is recommended every 30 days for best accuracy. The device reminds you via display warnings approaching deadline intervals. Frequent calibration ensures measurements remain trustworthy as sensors age naturally over time periods.

Is this answer helpful?

A

Yes, the package includes the universal power unit and mounting materials. However, the pH sensor and calibration liquids are listed as separate purchases. Temperature sensor is included within the main accessory bundle shipped with the controller.

Is this answer helpful?

A

Navigate to Settings Menu and select Software Version option. The current installed version along with serial number displays clearly on screen. This information is primarily needed for service support requests regarding repairs or updates.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Automatic pH and CO2 regulation reduces manual labor significantly for aquarium owners.
  • Colorful touch display allows intuitive navigation with minimal learning curve required.
  • Safe 12-volt low voltage operation prevents electrical hazards near water sources.
  • Multi-language support enhances accessibility for international users and collectors globally.
  • Comprehensive alarm system warns of critical deviations before they harm livestock.
VS

Disadvantages

  • Required pH sensor is not included and must be purchased separately for operation.
  • Regular calibration every few weeks is necessary to maintain accurate measurement readings.
  • Sensor lifespan is limited typically requiring replacement approximately every two years.
  • Device is indoor only and cannot withstand exposure to outdoor weather elements.
  • Initial setup requires specific knowledge of water chemistry parameters like KH levels.
M: QW-35-FL

Product Specification

Category

Water treatment, water parameters

Type

Controller for CO2 pressure regulator with solenoid valve (BNC connection for pH electrode, thermometer, touchscreen)

Application

Freshwater, Aquariums

Dimensions

3.50x2.64x0.98in (WxHxD)

Weight

2.07 lbs

Features

Also displays water temperature

M: QW-35-FL

Product Description

Unlocking Perfect Aquarium Chemistry

Maintaining optimal water conditions is essential for thriving aquatic ecosystems. Fish and plants require precise carbon dioxide and pH levels to survive and grow. The JBL Pro Flora CO2 Control Touch Manual keyword guides hobbyists to the best solutions for automation. This device manages parameters reliably without constant human intervention required daily. By measuring both pH and temperature continuously, it ensures your tank remains stable day and night.

Advanced Control Features

The unit features a colorful touch display designed for simple operation. You can navigate menus effortlessly using basic tapping gestures on the screen. Over nine languages are available to help people access functions easily. A dedicated automatic pH function calculates the ideal setpoint based on carbonate hardness levels. This eliminates complex guesswork when adjusting fertilizer systems in aquariums. Users benefit from reduced labor while achieving vibrant plant growth and healthy fish populations. Additional sensors allow real-time monitoring of environmental stability constantly. This helps maintain optimal conditions for diverse aquatic species daily. Hysteresis settings prevent frequent switching which extends component life during usage cycles.

Installation and Hardware Setup

Proper installation begins with securing the mounting bracket near the aquarium on the wall. The device connects to an external magnetic valve designed for JBL systems. Note that the pH sensor is purchased separately and must be calibrated regularly for accuracy. Temperature sensors work alongside to provide compensation for thermal changes within the water. All components operate on safe low voltage DC to prevent electrical hazards around wet environments. Mounting bars secure firmly to walls preventing accidental displacement easily. Cables connect securely without risk of incorrect alignment during setup. Power failures do not erase stored configuration data ensuring continuity for saved settings.

Safety and Maintenance Protocols

Built-in alarms notify you immediately if values drift beyond safe limits for stock. Both pH and temperature thresholds can be customized to fit species needs accurately. Regular calibration every few weeks maintains measurement integrity over time for reliable readings. Avoid exposing the unit to moisture or direct sunlight during operation to protect electronics. Proper storage solutions extend the lifespan of sensitive glass probes when not in use.

In summary, this control system offers peace of mind through intelligent automation. It bridges the gap between biological needs and chemical management effectively. Hobbyists gain more time for observation rather than constant adjustment tasks. Reliable performance ensures a balanced environment for long-term success in setups. Investing in quality monitoring tools protects livestock health investment greatly. Ensure proper ventilation prevents overheating issues affecting internal electronics safely. Always refer to official documentation for complete troubleshooting steps when issues arise.

M: QW-35-FL

© Copyright 2026 Manual.ly