Manual.ly Logo

InLine PoE+ Gigabit 16-Port 32316H Manual

0.0 · 0 Ratings

PDF manual · 6 Pages

English

M: QW-35-FL
page

/ 6

Loading...
5202953c35f886bd5a65ad6970a17d28a46a page 4
www.inline-info.com
4
1. GENERAL INFORMATION
VALIDITY:
This user manual applies to the following product: 32316H InLine® PoE+
Gigabit Network Injector Hub 16 Port
MANUFACTURER:
INTOS ELECTRONIC AG
Siemensstraße 11
D-35394 Gießen
DATE:
February 2020
2. CONTENT OF DELIVERY
• 1x InLine® PoE+ Gigabit Network Injector Hub 16 Port
• 2x User manual (German/English)
• 1x Power cord
• 2x 19“ mounting brackets
• 6x Screws for the mounting brackets
• 4x Rubber feet
Please check the content of delivery for completeness. If individual compo
-
nents are missing, please contact your dealer.
3. EXPLANATION OF WARNING SYMBOLS AND
NOTES
4. TECHNICAL CHARACTERISTICS
• Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
1000Base-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over
Ethernet Plus
• Ports „DATA IN“: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X
• Ports „DATA + PWR OUT“: 16x 10/100/1000Base-T RJ45, Auto-MDI/
MDI-X
• PoE type of power supply: end-span
• PoE output voltage: per port 48~56V DC
• PoE output power: per port max. 30 watts
• Power pin assignment: 1/2(+), 3/6(-)
• Total power: 250 watts
• Active cooling by two built-in fans
• Noise level maximum 35.1dB under full load at a distance of 50cm
• LED indicators: PWR, PoE (1-16)
• Dimensions (W x D x H): 358x205x44mm
• Weight: approx. 2.4 kg
• Power requirement: 100~240V AC internal power adapter
• Operating environment: operating temperature 0-40°C, storage tempera
-
ture -10-70°C, humidity 20-95% non-condensing
5. INTENDED USE
The InLine® PoE+ Gigabit Network Injector Hub is a fast and flexible solution
for upgrading the existing network to the Power over Ethernet system IEEE
802.3af / IEEE 802.3at without replacing existing switches. The injector hub
provides triple protection against overcurrent, overvoltage and overheating
at each port. In addition, the Injector Hub offers both IEEE 802.3af PoE and
IEEE 802.3at PoE+ with up to 30 watts of power per port via a single Cat. 5
/ 5e / 6 Ethernet cable with a combined total power of 250 watts. Sixteen
10/100/1000MBit/s PoE+ ports solve the problem of a limited number of avai
-
lable sockets and offer system administrators a flexible solution for operating
the network device to be supplied with power, such as PoE-capable IP came
-
ras or wireless access points, almost everywhere.
General warnings:
• Do not expose the InLine® PoE+ Gigabit Network Injector Hub to
extreme heat
• Protect from dust and moisture
6. IMPROPER USE
The following shall be deemed to be improper use within the meaning of a
foreseeable misuse:
• Do not disassemble the InLine® PoE+ Gigabit Network Injector Hub
7. APPLICATION / COMMISSIONING
Hardware installation
1. Plug the supplied power cord into the „AC IN“ jack of the device and the
other end into a power outlet. The „PWR“ LED lights up.
2. Connect an RJ45 cable from the „INPUT IN“ of the injector hub to the
Ethernet port of the existing switch.
3. Connect your IEEE 802.3af / at PoE-enabled device to the injector hub‘s
„DATA + PWR OUT“ port and it will automatically provide power over that
port. The LED indicator „PoE“ lights up for confirmation.
CONTENT
1. General information ........................................................................................................................................................................................................4
2. Content of delivery .........................................................................................................................................................................................................4
3. Explanation of warning symbols and notes...................................................................................................................................................................4
4. Technical characteristics................................................................................................................................................................................................4
5. Intended use ...................................................................................................................................................................................................................4
6. Improper use ................................................................................................................................................................................................................... 4
7. Application / commissioning ......................................................................................................................................................................................4-5
8. Maintenance and cleaning .............................................................................................................................................................................................5
9. Accessories ....................................................................................................................................................................................................................5
10. Disposal ..........................................................................................................................................................................................................................5
11. Disclaimer .......................................................................................................................................................................................................................5
NOTE!
This symbol indicates information that contributes to a bet
-
ter understanding.

Chat with your InLine PoE+ Gigabit 16-Port 32316H manual using AI

Get instant AI answers from your InLine PoE+ Gigabit 16-Port 32316H manual

Ask anything about the InLine PoE+ Gigabit 16-Port 32316H. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend PoE+ Gigabit 16-Port 32316H?

Yes No

Frequently Asked Questions

A

Each port can deliver a maximum of 30 watts of power, supporting both standard PoE and PoE+ devices efficiently.

Is this answer helpful?

A

Yes, the injector hub safely mixes devices. It will supply data to non-PoE devices but will not send power to them.

Is this answer helpful?

A

Use the included 19-inch mounting brackets and screws to secure the unit to your rack after attaching the brackets to the device sides.

Is this answer helpful?

A

The unit has built-in protection against overheating, which helps prevent damage during extended operation under heavy loads.

Is this answer helpful?

A

Yes, it uses two internal fans for active cooling to maintain optimal performance and temperature levels.

Is this answer helpful?

A

You need a standard Ethernet cable (Cat 5 or higher) for data and power, plus the included AC power cord for electricity.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Delivers up to 30 watts per port with a total capacity of 250 watts
  • Supports both IEEE 802.3af and IEEE 802.3at PoE standards
  • Features active cooling with low noise operation below 36dB
  • Includes rack mounting brackets for flexible installation options
  • Provides triple protection against overcurrent, overvoltage, and overheating
VS

Disadvantages

  • Requires an external AC power connection for operation
  • Active fans may produce audible noise in very quiet environments
  • Does not function as a managed switch for traffic control
  • Physical dimensions are larger than typical desktop adapters
  • No PoE passthrough capability for daisy-chaining multiple hubs
M: QW-35-FL

Product Specification

Function

PoE Injector (16x Data, 16x Data/​PoE+)

Type

Standalone, Rackmount (via mounting bracket)

Network Connections

16x RJ-45

Speeds

16x RJ-45 (10/​100/​1000Base-T)

PoE

16x RJ-45 PoE+ (16x 30W), total: 84.27 lbs at 250W

Backplane

N/​A

Officially Supported Standards

802.3, 802.3ab, 802.3af, 802.3at, 802.3u

Configuration

unmanaged

Cooling

active, 2x Fans (1.57 in)

Dimensions (WxDxH)

14.09x1.77x8.07 in, 1U

Weight

5.29 lbs

Color

black

Features

Metal enclosure, removable mounting brackets

Manufacturer Warranty

two years

M: QW-35-FL

Product Description

InLine Desktop Gigabit PoE Injector Hub: Power Your Network Effortlessly

The InLine Desktop Gigabit PoE Injector Hub (Item No. 32316H) stands as a robust solution for modern network administrators seeking to expand Power over Ethernet capabilities without replacing existing infrastructure. Designed for flexibility and speed, this device allows users to upgrade their current network to support IEEE 802.3af and IEEE 802.3at standards seamlessly. With sixteen dedicated ports, it solves the common bottleneck of limited power outlets, enabling the deployment of IP cameras, wireless access points, and other PoE-enabled devices virtually anywhere within your facility.

Equipped with sixteen 10/100/1000Base-T RJ45 ports, the hub delivers high-speed data transmission alongside power. Each port can supply up to 30 watts, culminating in a total system output of 250 watts. This substantial power budget ensures that even power-hungry devices receive consistent energy. The unit features active cooling via two built-in fans, maintaining optimal operating temperatures while keeping noise levels low at just 35.1dB under full load. Safety is prioritized with triple protection against overcurrent, overvoltage, and overheating on every single port.

Installation is straightforward, whether you place the unit on a desktop or mount it in a standard 19-inch rack using the included brackets and screws. The device automatically detects connected PoE-compatible devices and supplies power only when needed, ensuring safe coexistence with non-PoE equipment. Clear LED indicators provide immediate visual feedback on power status and active PoE connections for each of the sixteen ports. Whether for small business upgrades or large-scale enterprise expansions, this injector hub offers a reliable, scalable, and efficient method to power your network ecosystem.

Key Features Overview

  • Supports both PoE and PoE+ standards simultaneously.
  • Total power output of 250W distributed across 16 ports.
  • Active cooling system ensures long-term reliability.
  • Triple safety protection per port prevents hardware damage.
  • Compatible with Cat 5, 5e, and Cat 6 cabling.

Important Notes

  • Ensure the connected device is powered on before checking connectivity.
  • Do not expose the unit to extreme heat or moisture.
  • Clean only with a dry, soft cloth to avoid damaging electronics.
  • Dispose of the unit according to local electronic waste regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly