Manual.ly Logo

InLine IDE 44-Pin to 2x CF 76621I Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
1111def7ee891fef89a9d36450d1a0042d03 page 3
Article number 76621I
U s e r M a n u a l
INTRODUCTION
This 2.5” IDE to Dual Compact Flash Drive is an economical choice to use Compact Flash (CF) memory card as a
2.5’’ IDE storage device. Once being installed into PC/laptop, the CF appears as an ordinary IDE HDD to any
operating system and can be configured as a boot device. The IDE interface supports Ultra-DMA host port. The
CF interface supports up to two Ultra-DMA CF Type I cards and capable of transferring data up to 150M Bytes/sec.
The versatility and the high performance of this product make it an ideal CF read/write device for many industrial
PCs and embedded systems applications.
FEATURES AND SPECIFICATION
General
• Standard 2.5’’ IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master / Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the O/S and applications (depends on CF card specification)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit,
and Linux operating systems
• Power supply via IDE interface (44-way SFF IDE connector, +5V)
IDE Interface
• 44-way SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 X CF card sockets (Master / Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate up to 150M Byte/sec (depends on CF
card speed)
• Does not support hot swap on CF interface
Package Contents
Please check whether the package contains the following items. If any item is missing or damaged, please contact
the retailer as soon as possible:
• 2.5” IDE to Dual Compact Flash Drive x 1
• User manual x 1
Product Overview
Top side:

Chat with your InLine IDE 44-Pin to 2x CF 76621I manual using AI

Get instant AI answers from your InLine IDE 44-Pin to 2x CF 76621I manual

Ask anything about the InLine IDE 44-Pin to 2x CF 76621I. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend IDE 44-Pin to 2x CF 76621I?

Yes No

Frequently Asked Questions

A

It lets Compact Flash cards work like a standard 2.5-inch IDE drive. This is useful for older computers, industrial controllers, and embedded systems that still use a 44-pin IDE connection.

Is this answer helpful?

A

Yes, it can be configured as a bootable device if the host system and CF card support that function. Boot success depends on the card’s specifications and the system BIOS or firmware.

Is this answer helpful?

A

No drivers are required. The adapter is designed to be transparent to the operating system, so compatible systems can recognize the CF card as a regular IDE disk.

Is this answer helpful?

A

It supports two CF Type I cards, arranged as master and slave. This allows separate storage roles or expanded use within a compact hardware setup.

Is this answer helpful?

A

It is best for legacy PCs, industrial computers, and embedded devices that use IDE storage. It is especially useful where solid-state storage is preferred over mechanical drives.

Is this answer helpful?

A

No. Hot swapping is not supported on either the IDE or CF side, so cards should be inserted or removed only when the device is powered off.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Converts CF cards into IDE storage with very broad legacy system compatibility.
  • Supports two CF Type I cards in master/slave mode for flexible storage setups.
  • No drivers are required, making installation simple on supported operating systems.
  • LED indicators help with power, activity, and card-detection status at a glance.
VS

Disadvantages

  • Hot swap is not supported, so cards must be handled with the system powered down.
  • Limited to CF Type I cards, which reduces media compatibility.
  • Performance depends heavily on the speed and quality of the CF card used.
  • Best suited for older IDE-based hardware, so modern systems may not benefit from it.
M: OA-GPT-54-NAN

Product Specification

Conversion

IDE 2.5" -> CompactFlash

Host

1x IDE 2.5"/44-Pin (male)

Target

2x CompactFlash (CF I, CF II)

Additional Power Supply

N/A

Form Factor

2.5"-Housing (0.37in)

Dimensions

3.94x2.76x0.37in

M: OA-GPT-54-NAN

Product Description

InLine IDE 44Pin to 2x CF, 2.5-inch frame 9.5mm Manual

The InLine IDE 44Pin to 2x CF, 2.5-inch frame 9.5mm adapter is a practical way to turn Compact Flash media into a familiar IDE storage solution. Designed in a slim 2.5-inch format, it allows one or two CF Type I cards to behave like a standard hard drive when connected through a 44-pin IDE interface. That makes it especially useful for older PCs, industrial systems, and embedded projects that still rely on IDE storage.

What makes this adapter appealing is its simplicity. It works without drivers and is transparent to the operating system, so the CF card can appear just like a normal disk. In many setups, it can even serve as a bootable device, depending on the CF card used. This can be a smart choice for users who want reliable solid-state storage without the moving parts, noise, or vibration concerns of mechanical drives.

Performance is another strong point. The IDE side supports Ultra-DMA, while the CF side supports PIO, DMA, and Ultra-DMA modes, with transfer speeds of up to 150 MB/s depending on the card. The dual-socket design also adds flexibility: a master and slave card can be installed, making it easier to separate operating systems, applications, or data in compact environments.

The compact 9.5 mm frame helps it fit into systems where space is limited. LED indicators provide quick visual feedback for power, activity, and card detection, which is helpful during installation, testing, and maintenance. For builders who value compatibility and clear status monitoring, these small details matter.

Notes

  • Uses a 44-pin SFF IDE connection with 5V power from the IDE interface.
  • Hot swap is not supported, so cards should be inserted and removed with power off.
  • Best suited for CF Type I media and systems that benefit from legacy IDE compatibility.
  • Ideal for industrial PCs, older laptops, and embedded hardware upgrades.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly