Manual.ly Logo

Honeywell T6360B1036 Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-5-NAN
page

/ 1

Loading...
31eb7e4e7cf30716a49b4b9e2895f28d3d14 page 1
Guide to the Use of the T6360B1036 Room Thermostat
This user guide is for guidance only and at the time of production represented the latest information available to Honeywell from various sources.
Honeywel
l reserves the right at any time and without notice to change any product, specification or any other information contained in this publication and
cannot accept any responsibil
ity for loss or damage arising out of any errors that may inadvertently be contained herein.
EN2H-2102 UK01 R0915
honeywelluk.com
What is the purpose of a room thermostat?
The purpose of a room thermostat is to control the
temperature of the Heating when the
programmer/timer allows it to be switched on. The
Hot Water will not be affected in any way.
How do I set a room thermostat?
1. Make sure the Heating is turned on at the timer/
programmer.
2. Turn the room thermostat dial to set the room to
the temperature you require. Line the temperature
you require on the dial up with the line at the top of
the dial.
3. The indicator light will be lit up when the
Heating is on and off when the Heating is off. You
will also hear a click when you turn the dial, this
indicates the room thermostat is changing the
Heating temperature.
Why has the indicator light not switched on?
If you turn the dial up to a higher temperature and
you hear a ‘click’ but the light does not come on,
this usually means that the timer/ programmer is
switched off, or the Heating is programmed to be
off.
How do I save money and energy with a room
thermostat?
By turning your room thermostat down just 1
o
C
you will make an energy saving of 10%*. Your fuel
bill will therefore be reduced by 10% too.
*Energy Savings Trust
Dial
Indicator
light
Line up temperature with this line

Chat with your Honeywell T6360B1036 manual using AI

Get instant AI answers from your Honeywell T6360B1036 manual

Ask anything about the Honeywell T6360B1036. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend T6360B1036?

Yes No

Frequently Asked Questions

A

The T6360 controls the central heating circuit only. It maintains room temperature by switching the boiler on or off when the heating programmer/timer permits. It does not affect hot water systems.

Is this answer helpful?

A

Ensure the heating programmer is switched on, then rotate the thermostat dial so the desired temperature mark aligns with the fixed indicator line. You will hear a click as the thermostat changes state and see the indicator light when heating is active.

Is this answer helpful?

A

If you hear the click but the light stays off, the likely cause is that the programmer or timer is switched off or set to a heating-off period. The thermostat can only activate heating when the programmer allows it.

Is this answer helpful?

A

Lowering the room temperature by 1°C can deliver roughly a 10% reduction in heating energy consumption, which may translate to a similar reduction in fuel costs, depending on your system and usage patterns.

Is this answer helpful?

A

Mount the thermostat on an interior wall in a representative room, away from direct sunlight, drafts, radiators, fireplaces, or other localized heat sources to ensure accurate ambient temperature measurement.

Is this answer helpful?

A

No. The T6360 is a manual mechanical thermostat without built-in scheduling or remote connectivity. For timed heating periods you need a separate programmer or timer; smart features require a different thermostat model.

Is this answer helpful?

A

Yes, it is compatible with many traditional central heating systems where straightforward temperature control is needed. However, systems requiring programmability or smart controls may benefit from a digital or connected thermostat instead.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Simple, intuitive dial control requiring no programming knowledge.
  • Clear indicator light and audible click for immediate operational feedback.
  • Reliable mechanical design with proven Honeywell quality and longevity.
  • Energy saving potential: lowering setpoint by 1°C can reduce heating use by ~10%.
  • Works with standard heating systems and separate hot water controls.
VS

Disadvantages

  • No digital display or programmable schedules built into the thermostat.
  • Requires an external programmer/timer to schedule heating periods.
  • Mechanical dial may lack the precision of modern digital thermostats.
  • Placement sensitivity: inaccurate if installed near drafts or heat sources.
  • Limited features for smart-home integration or remote control.
M: OA-GPT-5-NAN

Product Specification

Type

Actuator

Function

Heating control, Thermostat, Temperature

M: OA-GPT-54-NAN

Product Description

Honeywell T6360 Raumthermostat Manual: Efficient, Simple Temperature Control

The Honeywell T6360 Raumthermostat is a straightforward mechanical room thermostat designed to give reliable temperature control for central heating systems. It features a clear dial, an indicator light, and an intuitive click feedback when adjusting the setpoint. The unit works in tandem with a separate programmer or timer: when the programmer enables heating, the thermostat regulates room temperature by switching the boiler on or off to maintain the chosen setpoint.

Practical Features and Use

Setting the thermostat is simple: ensure the heating programmer is switched on, then rotate the dial so the desired temperature marker aligns with the fixed indicator line. The thermostat produces an audible click as it changes state, and an indicator light shows when the heating is active. If the dial is raised and you hear the click but the light does not illuminate, the likely cause is that the programmer or timer is set to off.

The T6360 is focused on core functionality—no complex menus or digital displays—making it suitable for users who prefer tactile controls and visible feedback. It’s compatible with traditional heating systems where hot water control remains separate from room temperature control.

Energy-Saving Tip

A practical benefit of using the T6360 is energy efficiency through modest setpoint adjustments. Lowering the room temperature by 1°C can yield roughly a 10% reduction in heating energy consumption, helping reduce fuel costs and environmental impact.

Installation and Reliability

Designed by Honeywell with established quality standards, the T6360 offers a robust build and long-term reliability. It is intended to be wall-mounted in a representative room (not near drafts, direct sunlight, or heat sources) to ensure accurate ambient temperature sensing. Simple operation and clear feedback minimize user error.

Notes

  • The thermostat controls only the heating circuit; hot water systems are unaffected.
  • Ensure the system programmer/timer is enabled for the thermostat to activate heating.
  • Place the thermostat away from direct sunlight, drafts, and localized heat sources for accurate readings.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly