Manual.ly Logo

Holzmann DSM200PS Manual

1.0 · 1 Ratings

PDF manual · 25 Pages

English

M: OA-GPT-54-NAN
page

/ 25

Loading...
94b7809ff110649388d049a6a8cfcd71f49c page a
BETRIEB
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 10
DSM 150PS / DSM 200PS
7 BETRIEB
7.1 Bedienung
7.1.1 Einschalten / Ausschalten
Sie können die Maschine mit dem EIN-AUS Schalter (1) Ein- bzw. Ausschalten.
7.1.2 Polieren
Mit den Polierscheiben können verschieden Metalllegierungen wie Edelstahl, Stahl, Alu, Messing
usw. poliert werden.
Ebenso kann Holz oder Kunststoffe poliert werden.
Bei den unterschiedlichen Vorgängen wird zwischen Vorpolieren, Polieren sowie Hochglanzpolieren
unterschieden.
7.2 Betriebshinweise
Lassen Sie nach dem Einschalten die Polierscheiben auf volle Umdrehungszahl beschleunigen,
bevor Sie zum Polieren beginnen.
Überlasten Sie die Maschine nicht! Ein untrügliches Zeichen von Überlastung ist, wenn die
Polierscheibe bedeutend an Umdrehungsgeschwindigkeit verliert.
Beim Polieren ist das Tragen der Schutzbrille vorgeschrieben.
Die Fixierschrauben und Flansch, sind vor jedem Einsatz zu überprüfen, gegebenenfalls ist die
Fixierschraube nachzuziehen.
8 WARTUNG
A CHT UNG
Keine Reinigung, Wartung oder Instandhaltungstätigkeiten bei angeschlossener
Maschine:
Gefahrenquelle unbeabsichtigtes Einschalten der Maschine!
Daher: Maschine vorher von der Stromversorgung trennen.
Nach jedem Betrieb ist die Maschine zu reinigen! Verzichten Sie auf das Ausblasen der Maschine
mit Druckluftstrahl, da ansonsten gesundheitsschädigender Staub aufgewirbelt wird.
8.1 Polierscheibe wechseln
Maschine von der Stromversorgung trennen.
Die Polierscheibe fixieren und Fixiermutter und Flansch abschrauben.
Die alte Polierscheibe abnehmen und die neue aufsetzen.
Mit Flansch und Fixiermutter anschrauben.
Die Polierschleifscheibe kurz im Testbetrieb laufen lassen und auf etwaige
Unregelmäßigkeiten wie Unwucht etc. achten.

Chat with your Holzmann DSM200PS manual using AI

Get instant AI answers from your Holzmann DSM200PS manual

Ask anything about the Holzmann DSM200PS. Answers come from this manual, with the pages they are based on.

DSM200PS Maintenance Schedule

After each use
Clean the machine

Disconnect from power supply before cleaning. Use water and mild detergent only; do not use solvents or compressed air.

Show in the manual (page 10)
Before each use
Inspect fixing screws and flange

Check that fixing screws and flange are secure; tighten if necessary before operation.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DSM200PS?

Yes No
0
User Pic

Marek Weber

7 months ago

After about 30 minutes of use, my polishing unit starts to smell and the FI/RCD trips. Is this normal, and what should I do to avoid damaging the tool?

0
User Pic

Manual.ly

7 months ago

A smell during operation and an FI/RCD trip usually indicate an electrical fault or an overcurrent condition (for example, a damaged power cable, motor/brush issue, or internal short). Stop using the device immediately and unplug it. Do not keep testing it, since repeated tripping can worsen the problem. Check that the tool and power cord are not damaged and that you are using the correct voltage and a properly grounded outlet. If the FI/RCD trips again, the unit needs inspection by service or replacement of the affected electrical parts. Also confirm you are not overloading the tool (e.g., forcing it or using unsuitable accessories), but any FI trip is a safety issue and should be addressed first.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for polishing and surface finishing. The machine can be used on metals, wood, and plastics, making it useful for workshop work that requires smooth, refined results.

Is this answer helpful?

A

It is better suited to trained users. The manual stresses safe operation, correct setup, and proper protective equipment, so experience with workshop machines is strongly recommended.

Is this answer helpful?

A

The DSM200PS version is designed for 400V operation. It should be connected to a grounded supply and installed by a qualified electrician following the safety instructions.

Is this answer helpful?

A

Yes. It supports pre-polishing, polishing, and high-gloss finishing. That makes it practical for users who want a machine for multiple surface-refining steps.

Is this answer helpful?

A

Safety glasses are required, and hearing protection and dust protection are also recommended. The manual also advises avoiding loose clothing, jewelry, and open hair.

Is this answer helpful?

A

Maintenance is simple: clean it after use, inspect fasteners regularly, and replace worn polishing wheels when needed. The manual recommends mild cleaning agents and original spare parts.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual-wheel design supports flexible polishing stages and quick switching between tasks.
  • 400V power setup is suitable for stable workshop performance and regular finishing work.
  • Compact, sturdy build with mounting points helps reduce movement during operation.
  • Can polish metals, wood, and plastics, making it useful for varied surface finishing tasks.
VS

Disadvantages

  • Requires trained handling and strict safety awareness, so it is not ideal for beginners.
  • Needs a grounded connection and proper electrical setup before first use.
  • Not intended for outdoor use or humid environments beyond the stated limits.
  • Overloading can quickly reduce wheel speed and affect polishing quality.
M: OA-GPT-54-NAN

Product Specification

Power

900W (400V)

Disc diameter

each 7.87 in

Grinding width

each 0.98 in

Tool holder

Bore 0.63 in

Weight

59.53 lb

Scope of delivery

2x polishing wheel

M: OA-GPT-54-NAN

Product Description

Holzmann DSM200PS 400V Electric Double Grinder: Practical Power for Fine Polishing

The Holzmann DSM200PS 400V Electric Double Grinder is built for users who need steady polishing performance in a compact workshop machine. Designed as a double-wheel polishing unit, it is well suited for finishing metals, wood, and plastics with controlled results. Whether the task involves pre-polishing, refining a surface, or achieving a high-gloss finish, this machine is made to support clean and consistent work.

One of the strongest points of the DSM200PS is its solid, no-nonsense construction. The stable base with mounting holes helps keep the machine secure during operation, while the dual polishing wheels make it easy to move between different finishing stages. The 400V power setup is aimed at users who want dependable workshop performance and efficient operation under regular use. In practice, that means a machine that feels purpose-built for precise surface work rather than casual hobby polishing.

The Holzmann DSM200PS 400V Electric Double Grinder Manual places a strong focus on safety, and that approach reflects the product itself. The machine is intended for trained users, and it works best when paired with proper protective equipment such as safety glasses, hearing protection, and dust protection. Before use, the wheels should reach full speed, and the unit should never be overloaded. These practical rules help protect both the machine and the finished workpiece.

Maintenance is also kept straightforward. The polishing wheels can be replaced when worn, and cleaning is simple when done with water and mild detergent. The manual also emphasizes checking fasteners, keeping the work area clean, and using only original spare parts. These details matter because they support a longer service life and more reliable day-to-day use.

For workshops that value controlled polishing and dependable construction, the DSM200PS offers a balanced mix of power, stability, and usability. It is not overloaded with unnecessary features; instead, it focuses on doing one job well. That makes it a smart choice for users who want a dedicated polishing machine that can handle common finishing tasks with confidence.

Notes

  • Best suited for trained users and workshop environments.
  • Use only grounded power supply and proper safety protection.
  • Check wheel condition and fasteners before every session.
  • Avoid overload to maintain smooth polishing results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly