Manual.ly Logo

Holzmann DSM200PS Manual

1.0 · 1 Ratings

PDF manual · 25 Pages

English

M: OA-GPT-54-NAN
page

/ 25

Loading...
94b7809ff110649388d049a6a8cfcd71f49c page c
PREFACE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 12
DSM 150PS / DSM 200PS
9 PREFACE
Dear Customer!
This manual contains information and important instructions for the installation and correct use of
polishing machine DSM 150PS / DSM 200PS.
Following the usual commercial name of the device (see cover) is substituted in this manual with
the name "machine".
This manual is part of the product and shall not be stored separately from the product. Save it for
later reference and if you let other people use the product, add this instruction manual to the
product.
Please read and obey the security instructions!
Before first use read this manual carefully. It eases the correct use of the product and
prevents misunderstanding and damages of product and the user’s health.
Due to constant advancements in product design, construction pictures and content may diverse
slightly. However, if you discover any errors, inform us please.
Technical specifications are subject to changes!
Please check the product contents immediately after receipt for any eventual transport
damage or missing parts.
Claims from transport damage or missing parts must be placed immediately after initial
product receipt and unpacking before putting the product into operation.
Please understand that later claims cannot be accepted anymore.
Copyright
© 2015
This document is protected by international copyright law. Any unauthorized duplication,
translation or use of pictures, illustrations or text of this manual will be pursued by law.
Court of jurisdiction is the Landesgericht Linz or the competent court for 4170 Haslach, Austria!
CUSTOMER SERVICE CONTACT
HOLZMANN MASCHINEN GmbH
AT-4170 Haslach, Marktplatz 4
Tel 0043 7289 71562 - 0
Fax 0043 7289 71562 – 4

Chat with your Holzmann DSM200PS manual using AI

Get instant AI answers from your Holzmann DSM200PS manual

Ask anything about the Holzmann DSM200PS. Answers come from this manual, with the pages they are based on.

DSM200PS Maintenance Schedule

After each use
Clean the machine

Disconnect from power supply before cleaning. Use water and mild detergent only; do not use solvents or compressed air.

Show in the manual (page 10)
Before each use
Inspect fixing screws and flange

Check that fixing screws and flange are secure; tighten if necessary before operation.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DSM200PS?

Yes No
0
User Pic

Marek Weber

7 months ago

After about 30 minutes of use, my polishing unit starts to smell and the FI/RCD trips. Is this normal, and what should I do to avoid damaging the tool?

0
User Pic

Manual.ly

7 months ago

A smell during operation and an FI/RCD trip usually indicate an electrical fault or an overcurrent condition (for example, a damaged power cable, motor/brush issue, or internal short). Stop using the device immediately and unplug it. Do not keep testing it, since repeated tripping can worsen the problem. Check that the tool and power cord are not damaged and that you are using the correct voltage and a properly grounded outlet. If the FI/RCD trips again, the unit needs inspection by service or replacement of the affected electrical parts. Also confirm you are not overloading the tool (e.g., forcing it or using unsuitable accessories), but any FI trip is a safety issue and should be addressed first.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for polishing and surface finishing. The machine can be used on metals, wood, and plastics, making it useful for workshop work that requires smooth, refined results.

Is this answer helpful?

A

It is better suited to trained users. The manual stresses safe operation, correct setup, and proper protective equipment, so experience with workshop machines is strongly recommended.

Is this answer helpful?

A

The DSM200PS version is designed for 400V operation. It should be connected to a grounded supply and installed by a qualified electrician following the safety instructions.

Is this answer helpful?

A

Yes. It supports pre-polishing, polishing, and high-gloss finishing. That makes it practical for users who want a machine for multiple surface-refining steps.

Is this answer helpful?

A

Safety glasses are required, and hearing protection and dust protection are also recommended. The manual also advises avoiding loose clothing, jewelry, and open hair.

Is this answer helpful?

A

Maintenance is simple: clean it after use, inspect fasteners regularly, and replace worn polishing wheels when needed. The manual recommends mild cleaning agents and original spare parts.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual-wheel design supports flexible polishing stages and quick switching between tasks.
  • 400V power setup is suitable for stable workshop performance and regular finishing work.
  • Compact, sturdy build with mounting points helps reduce movement during operation.
  • Can polish metals, wood, and plastics, making it useful for varied surface finishing tasks.
VS

Disadvantages

  • Requires trained handling and strict safety awareness, so it is not ideal for beginners.
  • Needs a grounded connection and proper electrical setup before first use.
  • Not intended for outdoor use or humid environments beyond the stated limits.
  • Overloading can quickly reduce wheel speed and affect polishing quality.
M: OA-GPT-54-NAN

Product Specification

Power

900W (400V)

Disc diameter

each 7.87 in

Grinding width

each 0.98 in

Tool holder

Bore 0.63 in

Weight

59.53 lb

Scope of delivery

2x polishing wheel

M: OA-GPT-54-NAN

Product Description

Holzmann DSM200PS 400V Electric Double Grinder: Practical Power for Fine Polishing

The Holzmann DSM200PS 400V Electric Double Grinder is built for users who need steady polishing performance in a compact workshop machine. Designed as a double-wheel polishing unit, it is well suited for finishing metals, wood, and plastics with controlled results. Whether the task involves pre-polishing, refining a surface, or achieving a high-gloss finish, this machine is made to support clean and consistent work.

One of the strongest points of the DSM200PS is its solid, no-nonsense construction. The stable base with mounting holes helps keep the machine secure during operation, while the dual polishing wheels make it easy to move between different finishing stages. The 400V power setup is aimed at users who want dependable workshop performance and efficient operation under regular use. In practice, that means a machine that feels purpose-built for precise surface work rather than casual hobby polishing.

The Holzmann DSM200PS 400V Electric Double Grinder Manual places a strong focus on safety, and that approach reflects the product itself. The machine is intended for trained users, and it works best when paired with proper protective equipment such as safety glasses, hearing protection, and dust protection. Before use, the wheels should reach full speed, and the unit should never be overloaded. These practical rules help protect both the machine and the finished workpiece.

Maintenance is also kept straightforward. The polishing wheels can be replaced when worn, and cleaning is simple when done with water and mild detergent. The manual also emphasizes checking fasteners, keeping the work area clean, and using only original spare parts. These details matter because they support a longer service life and more reliable day-to-day use.

For workshops that value controlled polishing and dependable construction, the DSM200PS offers a balanced mix of power, stability, and usability. It is not overloaded with unnecessary features; instead, it focuses on doing one job well. That makes it a smart choice for users who want a dedicated polishing machine that can handle common finishing tasks with confidence.

Notes

  • Best suited for trained users and workshop environments.
  • Use only grounded power supply and proper safety protection.
  • Check wheel condition and fasteners before every session.
  • Avoid overload to maintain smooth polishing results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly