Manual.ly Logo

HJC CS-15 Dosta Manual

0.0 · 0 Ratings

PDF manual · 19 Pages

English

M: QW-35-FL
page

/ 19

Loading...
481aa955fbdd7d8c950f542c35c469aa55de page 4
1.
Align the center of the crown pad’s plastic sleeve with the shell. Force the crown pad’s plastic sleeve in between the shell
and EPS.
2.
Align the left or right end of the crown pad’s plastic sleeve with the shell. Force the crown pad’s plastic sleeve in between
the shell and EPS (one side at a time).
3. Align and snap the two rear snaps into place.
Crown Pad Installation
Breath Deflector Removal
1. Push breath deflector flat and pull away from the helmet as arrows indicate.
Breath Deflector Installation
1. Push breath deflector into specified slot as arrows indicate.
Chin Curtain Removal
1. Grasp the chin curtain fabric (one side at a time) at the bottom corners and
gently pull the sleeve down and away from the shell.
Chin Curtain Installation
1. Center the front plastic sleeve of the chin curtain with the shell.
Force the chin curtain’s plastic sleeve in between the shell and EPS.
Replacement Parts
Do Not Modify Your Helmet
Your HJC helmet is designed to meet ECE R 22-05 standard. Contact HJC Europe for more information about the ECE R 22-05
standard. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC
helmet. Modifications include the following :
• drilling holes;
• cutting shell, liner, or strap;
• modifying the retention system, including adding a chin cup;
• removing parts;
• painting; and
• attaching accessories that are not manufactured by HJC for this helmet.
If you have questions about modifications, please contact HJC, See back cover for contact information.
Always check to make sure helmet pads are installed before using the helmet. A helmet with missing or improperly installed
pads may increase your risk of serious injury or death in an accident.
Even if your helmet has not been damaged, it needs to be replaced every 3 to 5 years depending on how much you use it.
Over time, UV rays and adhesive and component aging will damage your helmet. Wearing a damaged helmet may increase
your risk of serious injury or death in an accident. If you are unsure if you need to replace your helmet, contact HJC Europe
before using your helmet again.
HJC hereby extends a limited warranty to the purchaser of a HJC helmet that the helmet is free of defects in materials and
workmanship.
This warranty is applicable to manufacturer’s defects only and is good up to one year from the date of purchase, It does not
apply to any problems arising out of wearer’s misuse, negligence, modifications, accidents, etc.
Helmet Disposal
Coverage
Any warranty of merchantability and any implied warranty are hereby expressly disclaimed. In addition HJC shall not be liable
for any consequential damages.
Disclaimer
In order to receive warranty, please take your helmet, your receipt showing the date of purchase, and a brief memo that
includes a description of the problem, your name, and phone number tothe authorized HJC dealer from which you purchased
your helmet.
Procedure
An improperly stored helmet san become damaged and may increase your risk of serious injury or death in
an accident. You should:
•
Store helmet in a cool and dry place,
•
Keep helmet away from pets and other animals,
•
Keep helmet away from heat in excess of 50°C and do not set on or near hot surfaces.
•
When helmets left out in the sun for extended periods of time, it may fade overtime.
Although your HJC helmet is constructed with the best materials available to offer a long-lasting product, it
will eventually need to be replaced. Immediately replace your helmet if:
• It has suffered an impact. Your helmet is only designed for ONE impact. An impact may fracture the outer
s
hell or compress the impact absorbing liner. You may not be able to detect this damage. Any impact in
a crash or a drop from as low as 4 feet is enough to damage your helmet.
•
T
he shell, lining, or retention system is damaged. The helmet shell, the impact absorbing lining, and
the
retention system must be in good condition to provide you with the most protection.
If you buy a new helmet, destroy the old one to ensure it cannot be reused. Do not sell or give away your
old helmet, even if it has not been damaged. Over time the protective foam in the helmet will adjust to the
contours of your head. If someone else uses this helmet it will not provide them with as much protection.
Helmet Replacement
Storing Your Helmet Correctly
Warranty
5 6

Chat with your HJC CS-15 Dosta manual using AI

Get instant AI answers from your HJC CS-15 Dosta manual

Ask anything about the HJC CS-15 Dosta. Answers come from this manual, with the pages they are based on.

CS-15 Dosta Maintenance Schedule

Remind me when maintenance is due
Every 3-5 years
Replace helmet

Replace the helmet every 3 to 5 years due to UV exposure and component aging, even if no visible damage exists.

Before every ride
Inspect helmet for damage

Check shield ratchet tightness, look for shell cracks or worn parts, and ensure retention system is secure before riding.

Regularly
Clean removable pads

Machine wash removable cheek and crown pads with mild soap and air dry to remove sweat and dirt accumulation.

As needed
Clean vents with compressed air

Use compressed air cans to blow debris from ventilation system after removing interior pads.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CS-15 Dosta?

Yes No

Frequently Asked Questions

A

Use warm water and mild soap. Do not use rubbing compounds or excessive pressure, as this can create a glossy effect that ruins the matte appearance.

Is this answer helpful?

A

No, modifying the helmet by drilling, cutting, or painting increases the risk of injury. Modifications void the warranty and compromise structural integrity.

Is this answer helpful?

A

Replace your helmet every 3 to 5 years due to aging materials. Also replace it immediately after any impact, even if no damage is visible.

Is this answer helpful?

A

Yes, the HJC CS-15 features a tool-less shield mechanism that allows for easy removal and installation without requiring additional tools.

Is this answer helpful?

A

Avoid insect repellents, gasoline, and gasoline fumes. These chemicals can damage the shield, shell, and protective foam liner.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Meets ECE R 22-05 safety standards for high-level protection
  • Tool-less shield system allows for quick and easy adjustments
  • Micro-buckle ensures a secure and comfortable chin strap fit
  • Removable and washable cheek pads maintain hygiene and comfort
  • Aerodynamic design with effective front and rear ventilation
VS

Disadvantages

  • Open-face design offers less coverage than full-face helmets
  • Matte finish requires specific cleaning methods to avoid glossing
  • No built-in sun visor included in the base model
  • Replacement parts must be genuine HJC to maintain warranty
  • Helmet must be replaced every 3-5 years regardless of condition
M: QW-35-FL

Product Specification

Type

Integral helmet

M: QW-35-FL

Product Description

Discover the HJC CS-15 Dosta MC1 Helmet

The HJC CS-15 Dosta MC1 in a striking black and red color scheme is a versatile open-face helmet designed for riders who value both style and safety. This model features a sleek, aerodynamic shell that reduces wind noise while providing excellent protection on the road. The distinctive MC1 graphic adds a modern touch to the classic open-face design, making it a favorite among urban commuters and weekend cruisers alike.

Safety is at the core of this helmet's construction. It meets the rigorous ECE R 22-05 standards, ensuring reliable impact absorption. The micro-buckle retention system allows for quick and secure fastening under the chin, ensuring the helmet stays firmly in place even during sudden maneuvers. The face shield is tool-less, enabling easy adjustments or replacements without needing extra equipment. Proper ventilation is managed through front chin vents and rear exhaust ports, keeping the rider cool and comfortable during long rides.

Comfort is enhanced by the soft inner lining and removable cheek pads, which can be washed to maintain hygiene. The crown pad is also adjustable and removable, allowing for a customized fit. Riders should always ensure the helmet fits snugly around the head and cheeks without causing pressure points. A proper fit is crucial for maximum safety; if the helmet slides easily or obstructs vision, a different size should be tried immediately.

Maintaining your HJC CS-15 involves regular cleaning with approved products. For glossy finishes, automotive cleaners are recommended, while matte finishes require warm water and mild soap to preserve the texture. Avoid using insect repellents or gasoline near the helmet, as these substances can damage the shell and visor. Always store the helmet in its bag when not in use to protect it from dust and accidental scratches.

Remember that helmets have a lifespan. Even without visible damage, it is advisable to replace your helmet every three to five years due to material degradation from UV exposure and sweat. Never modify the helmet structure, as this compromises its safety integrity. Whether you choose the black/red combo or another variant, the HJC CS-15 offers a blend of performance and aesthetics suitable for various riding styles.

M: QW-35-FL

© Copyright 2026 Manual.ly