Hager EE806 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Hager EE806 manual using AI
Get instant AI answers from your Hager EE806 manual
Ask anything about the Hager EE806. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EE806?
Yes NoFrequently Asked Questions
The battery lasts approximately five years using a 3V CR2032 type cell for standard operation.
Is this answer helpful?
Compatible models include EE85, EE86, EE87, TRE600, and WYC5xxC series detectors for full functionality.
Is this answer helpful?
Yes, press and hold specific combination buttons for one second to lock configurations securely.
Is this answer helpful?
The remote has an IP30 rating to resist dust while detectors typically support IP55 ratings.
Is this answer helpful?
Press the reset button to return to manufacturer factory settings if errors occur.
Is this answer helpful?
Yes, EE87x detectors support switching between 220 and 360 degree detection modes.
Is this answer helpful?
The remote is IP30 protected; water resistance depends on the connected sensor unit used.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Five-year battery life minimizes maintenance
- Remote configuration avoids physical access issues
- Secure locking mechanism protects settings
- Supports multiple detector series models
- LED feedback confirms every button press
Disadvantages
- IP30 rating prevents full outdoor exposure
- Fixed button layout may confuse new operators
- Requires specific compatible detector models
- Battery replacement requires opening casing
- Range limitations compared to wired systems
Product Specification
Type
Remote control for motion sensor
Protection Class
IP55
Product Description
Enhancing Sensor Management Capabilities
Modern infrastructure relies heavily on reliable automation to maintain safety standards and operational efficiency throughout large buildings. The Hager Remote Control IR for Motion Detector Comfort IP55 EE85x/86x/87x/TRE600/WYC5xxC Manual offers a sophisticated approach to adjusting motion sensing devices without requiring direct physical contact with the wall-mounted units. This solution empowers facility managers to tweak sensitive settings remotely, ensuring optimal performance is maintained across various zones continuously. Integration involves seamless pairing with the specified detector models to create a cohesive and responsive network for enhanced monitoring.
Detailed Button Configuration Logic
Interaction begins with pressing specific keys designated for distinct and unique commands within the software stack. An LED flash confirms every action taken by the operator visually on the panel. Top buttons remain fully functional even when the system enters a locked state for added security protection. Users can select Auto mode, activate Holiday simulation to mimic presence, or force lights ON or OFF immediately. Lighting sensitivity adjusts for Day, Twilight, Night, or Auto Learning ambient brightness levels. Sensitivity controls prevent false alarms from minor movements or shadows. Time delays dictate exactly how long illumination persists after detection stops triggering. A specific sequence locks or unlocks the entire configuration system securely.
Operational Resilience and Physical Design
Powering the unit utilizes a standard 3V CR2032 battery delivering five years of continuous service life reliably. The device features an IP30 rating to resist dust intrusion though it does not offer full waterproof protection compared to higher rated outdoor sensors. Pairing with IP55 detectors provides robust environmental resistance for both indoor and outdoor applications safely. Testing modes verify connectivity and signal strength before permanent installation occurs. Reset functions allow restoring factory settings quickly if errors accumulate during usage. Detection patterns switch between 220 degrees and 360 degrees depending on the specific EE87x variant installed locally.
Universal Model Support and Versatility
Compatibility spans the EE85, EE86, and EE87 series along with TRE600 and WYC5xxxxC units globally. This versatility ensures existing installations can upgrade control methods without needing to replace expensive hardware components completely. Clear labeling aids technicians significantly during the initial setup phase and troubleshooting steps. Energy consumption remains extremely low due to efficient infrared transmission technology used throughout. Long-term reliability stems from durable construction materials suitable for high-traffic public areas. Regular maintenance checks ensure consistent output levels over many years of daily operation. Proper training on this interface minimizes downtime during necessary repairs or modifications to the electrical grid network.
Search for 67,706 Manuals online
Type-in Brand or Model