Manual.ly Logo

GYS GYSMI 160P Manual

5.0 · 7 Ratings

PDF manual · 48 Pages

English

M: QW-35-FL
page

/ 48

Loading...
2b382cf36bccb7b2e38c4fb67fcde2ca1293 page c
12
GYSMI 80P 130P 160P 200P
MADE IN FRANCE
EN
The manufacturer does not incur any responsability regarding damages to both objects and persons
that result from an incorrect and/or dangerous use of the machine.
MAINTENANCE / RECOMMENDATIONS
• Maintenance should only be carried out by a qualied person. Annual maintenance is recommended.
• Ensure the machine is unplugged from the mains, and wait for two minutes before carrying out main-
tenance work. DANGER High Voltage and Currents inside the machine.
• Remove the casing 2 or 3 times a year to remove any excess dust. Take this opportunity to have the
electrical connections checked by a qualied person, with an insulated tool.
• Regularly check the condition of the power supply cable. If the power cable is damaged, it must be
replaced by the manufacturer, its after sales service or an equally qualied person.
• Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
• Do not use this equipment to thaw pipes, to charge batteries, or to start any engine.
INSTALLATION – PRODUCT OPERATION
Only qualied personnel authorized by the manufacturer should perform the installation of the welding equipment.
During set up, the operator must ensure that the machine is unplugged. Connecting generators in a series or a parallel
circuit is forbidden.
HARDWARE DESCRIPTION
The 80P, 130P, 160P, 200P are Inverter technology based welding machines, portable, single phase, fan cooled, for
electrode welding (MMA) in direct current output(DC). These machines can weld all types of electrodes : rutile, basic/
low hydrogen (except 80P), stainless and cast iron. They’re protected to work with generators (230 V +- 15%).
POWER SUPPLY – STARTING UP
• This hardware is supplied wih a 16A plug, type CEE7/7 (Standard 13A UK plug in the United Kingdom). The machine
must be connected to a socket WITH earth 230V (50 – 60 Hz). The absorbed effective current (I1eff) is displayed on the
machine, for optimal use. Check that the power supply and its protection (fuse and/or circuit breaker) are compatible
with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings. Prefer a 20A socket for the 130P, 25 A for the 160P and 32A for the 200P in intensive use. The
device must be positioned so that the socket is always accessible.
• Starting the 80P, 130P, 160P et 200P is done by positionning the switch on the desired current value (the sleep mode
corresponds to the «
» value of the potentiometer).
CONNECTION ON A GENERATOR
The machine can work with generators as long as the auxiliary power matches these requirements :
- The voltage must be AC, always set as specied, and the peak voltage below 400V,
- The frequency must be between 50 and 60 Hz.
It is imperative to check these requirements as several generators generate high voltage peaks that can damage these
machines.
MMA WELDING (ELECTRODE)
CONNECTIONS AND RECOMMENDATIONS
• Connect the cables, electrode holder and earth clamp in the connectors,
• Respect the welding polarity and required current indicated on the electrodes boxes,
• Remove the electrode from the electrode holder when the machine is not in use.
• Your machine has 3 features exclusive to Inverters :
- Hot Start delivers initial overcurrent to facilitate easy arc striking.
- Arc Force adjusts the arc voltage to compensate for the arc length increasing/decreasing
- Anti-Sticking technology prevents your electrode sticking to the work piece
TIG WELDING WITH INERT GAS (TIG MODE DC)
These machines can weld DC TIG with scratch start .

Chat with your GYS GYSMI 160P manual using AI

Get instant AI answers from your GYS GYSMI 160P manual

Ask anything about the GYS GYSMI 160P. Answers come from this manual, with the pages they are based on.

GYSMI 160P Maintenance Schedule

Remind me when maintenance is due
Yearly
Perform annual maintenance

Annual maintenance is recommended. It must only be carried out by a qualified person.

Show in the manual (page 12)
2-3 times a year
Remove casing and blow dust

Remove the casing 2 or 3 times a year to remove excess dust using an air blower.

Show in the manual (page 12)
During dusting
Check electrical connections

Have electrical connections checked by a qualified person with an insulated tool when removing the casing.

Show in the manual (page 12)
Regularly
Inspect power supply cable

Regularly check the condition of the power supply cable. Replace if damaged via manufacturer or qualified person.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend GYSMI 160P?

Yes No
0
User Pic

Keeley Khan

6 months ago

Is this welding inverter suitable for beginners and does it have a short cable?

0
User Pic

Manual.ly

6 months ago

Yes, this welding inverter is designed to be user-friendly, making it an excellent choice for beginners. It features easy operation and reliable performance right from the first attempt. Regarding the cable, while the unit is praised for its compact and handy design, some users have noted that the included cables are somewhat short. Overall, it delivers good weld quality comparable to industrial machines and is highly recommended.

M: QW-35-FL
M: QW-35-FL
0
User Pic

gferry87

6 months ago

How is the cooling system managed during operation?

M: QW-35-FL

Frequently Asked Questions

A

This is a Class A device intended for industrial use. It may cause electromagnetic interference on public low-voltage residential grids. You should check with your network operator to ensure compliance.

Is this answer helpful?

A

The GYSMI 160P supports all common electrode types including rutile, stainless steel, cast iron, and basic electrodes for DC MMA welding.

Is this answer helpful?

A

Yes, it works with generators provided the auxiliary power meets requirements: AC voltage under 400V peak and frequency between 50-60 Hz.

Is this answer helpful?

A

The manufacturer provides a 2-year warranty covering defects in workmanship and materials from the date of purchase.

Is this answer helpful?

A

Welding generates electromagnetic fields that can interfere with medical implants. People with pacemakers must consult their doctor before using this equipment.

Is this answer helpful?

A

The machine has an IP21 rating, protecting against solid objects larger than 12.5mm and vertical water droplets when the fan is stationary.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Includes a protective carrying case for safe transport and storage
  • Three advanced inverter functions: Hot Start, Arc Force, and Anti-Sticking
  • Compatible with generators providing 230V +/- 15% fluctuation
  • Made in France with high-quality components and durability
  • IP21 protection rating safeguards against dust and water droplets
VS

Disadvantages

  • Class A device not intended for residential use on public low-voltage networks
  • Requires specific network impedance limits for compliance in some models
  • Annual maintenance by qualified personnel is strictly recommended
  • Not suitable for TIG welding without optional accessories
  • Must be used in well-ventilated areas due to hazardous fume generation
M: QW-35-FL

Product Specification

Power

6kW (230V)

Open circuit voltage

72V

Regulation range

10-160A (WIG/MMA)

Electrodes

0.06-0.16in (MMA)

Protection class

IP21

Dimensions

10.6x4.3x6.7in (HxDxW)

Weight

9.26lbs

M: QW-35-FL

Product Description

The GYS GYSMI 160P Inverter Welding Machine: A Portable Powerhouse

The GYS GYSMI 160P Inverter Welding Machine incl. Case is a robust, portable solution designed for professional welders who demand reliability and precision. Manufactured in France, this unit represents the pinnacle of compact welding technology, combining advanced inverter electronics with durable construction. It is specifically engineered for MMA (Manual Metal Arc) welding using direct current, making it versatile enough to handle rutile, stainless steel, cast iron, and basic electrodes.

One of the standout features of the GYS GYSMI 160P is its intelligent design tailored for modern work environments. It includes three specialized inverter functions: Hot Start for easy arc ignition, Arc Force to prevent electrode sticking during low voltage drops, and Anti-Sticking technology that instantly cuts power if the electrode adheres to the workpiece. This machine is also built to withstand the rigors of on-site work, featuring protection against generator power fluctuations up to +/- 15% on 230V supplies.

Safety is paramount in the design of this equipment. The unit operates within a temperature range of -10°C to +40°C and carries an IP21 rating, offering protection against solid objects larger than 12.5mm and vertically falling water drops. The manual emphasizes strict safety protocols regarding electromagnetic fields, advising users with pacemakers to consult a doctor before use. Proper ventilation is required to manage welding fumes, and the machine must be kept away from flammable materials and conductive dust.

The package includes a dedicated carrying case, ensuring safe transport and storage. Whether you are working in a workshop or traveling between job sites, the GYS GYSMI 160P offers a balance of power, portability, and safety. Its single-phase operation simplifies connectivity, while the inclusion of a 16A plug ensures compatibility with standard industrial sockets. Regular maintenance by qualified personnel is recommended to keep the unit performing at peak efficiency.

Important Notes

  • Always disconnect power and wait two minutes before opening the casing.
  • Ensure the grounding cable is connected as close to the welding area as possible.
  • Do not use the machine to thaw pipes or charge batteries.
  • Store gas cylinders upright and secure them to prevent tipping.
M: QW-35-FL

© Copyright 2026 Manual.ly