Manual.ly Logo

GYS GYSMI 160P Manual

5.0 · 7 Ratings

PDF manual · 48 Pages

English

M: QW-35-FL
page

/ 48

Loading...
2b382cf36bccb7b2e38c4fb67fcde2ca1293 page 8
8
GYSMI 80P 130P 160P 200P
MADE IN FRANCE
EN
WARNING - SAFETY RULES
GENERAL INSTRUCTIONS
Read and understand the following safety recommendations before using or servicing the unit.
Any change or servicing that is not specied in the instruction manual must not be undertaken.
The manufacturer is not liable for any injury or damage caused due to non-compliance with the instructions featured
in this manual .
In the event of problems or uncertainties, please consult a qualied person to handle the installation properly.
ENVIRONMENT
This equipment must only be used for welding operations in accordance with the limits indicated on the descriptive panel
and/or in the user manual. The operator must respect the safety precautions that apply to this type of welding. In case
of inedaquate or unsafe use, the manufacturer cannot be held liable for damage or injury.
This equipment must be used and stored in a place protected from dust, acid or any other corrosive agent. Operate the
machine in an open, or well-ventilated area.
Operating temperature:
Use between -10 and +40°C (+14 and +104°F).
Store between -20 and +55°C (-4 and 131°F).
Air humidity:
Lower or equal to 50% at 40°C (104°F).
Lower or equal to 90% at 20°C (68°F).
Altitude:
Up to 1000 meters above sea level (3280 feet).
INDIVIDUAL PROTECTIONS AND OTHERS
Arc welding can be dangerous and can cause serious and even fatal injuries.
Welding exposes the user to dangerous heat, arc rays, electromagnetic elds, noise, gas fumes, and electrical shocks.
People wearing pacemakers are advised to consult with their doctor before using this device.
To protect oneself as well as the other, ensure the following safety precautions are taken:
In order to protect you from burns and radiations, wear clothing without cuffs. These clothes must be
insulated, dry, reproof and in good condition, and cover the whole body.
Wear protective gloves which guarantee electrical and thermal insulation.
Use sufcient welding protective gear for the whole body: hood, gloves, jacket, trousers... (varies depen-
ding on the application/operation). Protect the eyes during cleaning operations. Do not operate whilst
wearing contact lenses.
It may be necessary to install reproof welding curtains to protect the area against arc rays, weld spatters
and sparks.
Inform the people around the working area to never look at the arc nor the molten metal, and to wear
protective clothes.
Ensure ear protection is worn by the operator if the work exceeds the authorised noise limit (the same
applies to any person in the welding area).
Stay away from moving parts (e.g. engine, fan...) with hands, hair, clothes etc...
Never remove the safety covers from the cooling unit when the machine is plugged in - The manufac-
turer is not responsible for any accident or injury that happens as a result of not following these safety
precautions.
The pieces that have just been welded are hot and may cause burns when manipulated. During mainte-
nance work on the torch or the electrode holder, you should make sure it’s cold enough and wait at least
10 minutes before any intervention. The cooling unit must be on when using a water cooled torch in order
to ensure that the liquid does not cause any burns.
ALWAYS ensure the working area is left as safe and secure as possible to prevent damage or accidents.

Chat with your GYS GYSMI 160P manual using AI

Get instant AI answers from your GYS GYSMI 160P manual

Ask anything about the GYS GYSMI 160P. Answers come from this manual, with the pages they are based on.

GYSMI 160P Maintenance Schedule

Remind me when maintenance is due
Yearly
Perform annual maintenance

Annual maintenance is recommended. It must only be carried out by a qualified person.

Show in the manual (page 12)
2-3 times a year
Remove casing and blow dust

Remove the casing 2 or 3 times a year to remove excess dust using an air blower.

Show in the manual (page 12)
During dusting
Check electrical connections

Have electrical connections checked by a qualified person with an insulated tool when removing the casing.

Show in the manual (page 12)
Regularly
Inspect power supply cable

Regularly check the condition of the power supply cable. Replace if damaged via manufacturer or qualified person.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend GYSMI 160P?

Yes No
0
User Pic

Keeley Khan

6 months ago

Is this welding inverter suitable for beginners and does it have a short cable?

0
User Pic

Manual.ly

6 months ago

Yes, this welding inverter is designed to be user-friendly, making it an excellent choice for beginners. It features easy operation and reliable performance right from the first attempt. Regarding the cable, while the unit is praised for its compact and handy design, some users have noted that the included cables are somewhat short. Overall, it delivers good weld quality comparable to industrial machines and is highly recommended.

M: QW-35-FL
M: QW-35-FL
0
User Pic

gferry87

6 months ago

How is the cooling system managed during operation?

M: QW-35-FL

Frequently Asked Questions

A

This is a Class A device intended for industrial use. It may cause electromagnetic interference on public low-voltage residential grids. You should check with your network operator to ensure compliance.

Is this answer helpful?

A

The GYSMI 160P supports all common electrode types including rutile, stainless steel, cast iron, and basic electrodes for DC MMA welding.

Is this answer helpful?

A

Yes, it works with generators provided the auxiliary power meets requirements: AC voltage under 400V peak and frequency between 50-60 Hz.

Is this answer helpful?

A

The manufacturer provides a 2-year warranty covering defects in workmanship and materials from the date of purchase.

Is this answer helpful?

A

Welding generates electromagnetic fields that can interfere with medical implants. People with pacemakers must consult their doctor before using this equipment.

Is this answer helpful?

A

The machine has an IP21 rating, protecting against solid objects larger than 12.5mm and vertical water droplets when the fan is stationary.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Includes a protective carrying case for safe transport and storage
  • Three advanced inverter functions: Hot Start, Arc Force, and Anti-Sticking
  • Compatible with generators providing 230V +/- 15% fluctuation
  • Made in France with high-quality components and durability
  • IP21 protection rating safeguards against dust and water droplets
VS

Disadvantages

  • Class A device not intended for residential use on public low-voltage networks
  • Requires specific network impedance limits for compliance in some models
  • Annual maintenance by qualified personnel is strictly recommended
  • Not suitable for TIG welding without optional accessories
  • Must be used in well-ventilated areas due to hazardous fume generation
M: QW-35-FL

Product Specification

Power

6kW (230V)

Open circuit voltage

72V

Regulation range

10-160A (WIG/MMA)

Electrodes

0.06-0.16in (MMA)

Protection class

IP21

Dimensions

10.6x4.3x6.7in (HxDxW)

Weight

9.26lbs

M: QW-35-FL

Product Description

The GYS GYSMI 160P Inverter Welding Machine: A Portable Powerhouse

The GYS GYSMI 160P Inverter Welding Machine incl. Case is a robust, portable solution designed for professional welders who demand reliability and precision. Manufactured in France, this unit represents the pinnacle of compact welding technology, combining advanced inverter electronics with durable construction. It is specifically engineered for MMA (Manual Metal Arc) welding using direct current, making it versatile enough to handle rutile, stainless steel, cast iron, and basic electrodes.

One of the standout features of the GYS GYSMI 160P is its intelligent design tailored for modern work environments. It includes three specialized inverter functions: Hot Start for easy arc ignition, Arc Force to prevent electrode sticking during low voltage drops, and Anti-Sticking technology that instantly cuts power if the electrode adheres to the workpiece. This machine is also built to withstand the rigors of on-site work, featuring protection against generator power fluctuations up to +/- 15% on 230V supplies.

Safety is paramount in the design of this equipment. The unit operates within a temperature range of -10°C to +40°C and carries an IP21 rating, offering protection against solid objects larger than 12.5mm and vertically falling water drops. The manual emphasizes strict safety protocols regarding electromagnetic fields, advising users with pacemakers to consult a doctor before use. Proper ventilation is required to manage welding fumes, and the machine must be kept away from flammable materials and conductive dust.

The package includes a dedicated carrying case, ensuring safe transport and storage. Whether you are working in a workshop or traveling between job sites, the GYS GYSMI 160P offers a balance of power, portability, and safety. Its single-phase operation simplifies connectivity, while the inclusion of a 16A plug ensures compatibility with standard industrial sockets. Regular maintenance by qualified personnel is recommended to keep the unit performing at peak efficiency.

Important Notes

  • Always disconnect power and wait two minutes before opening the casing.
  • Ensure the grounding cable is connected as close to the welding area as possible.
  • Do not use the machine to thaw pipes or charge batteries.
  • Store gas cylinders upright and secure them to prevent tipping.
M: QW-35-FL

© Copyright 2026 Manual.ly