Manual.ly Logo

GYS GYSMI 130P Manual

0.0 · 0 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
10bdc9a6b9967fee89b3486436328f8e6357 page c
12
GYSMI 80P 130P 160P 200P
MADE IN FRANCE
EN
The manufacturer does not incur any responsability regarding damages to both objects and persons
that result from an incorrect and/or dangerous use of the machine.
MAINTENANCE / RECOMMENDATIONS
• Maintenance should only be carried out by a qualied person. Annual maintenance is recommended.
• Ensure the machine is unplugged from the mains, and wait for two minutes before carrying out main-
tenance work. DANGER High Voltage and Currents inside the machine.
• Remove the casing 2 or 3 times a year to remove any excess dust. Take this opportunity to have the
electrical connections checked by a qualied person, with an insulated tool.
• Regularly check the condition of the power supply cable. If the power cable is damaged, it must be
replaced by the manufacturer, its after sales service or an equally qualied person.
• Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
• Do not use this equipment to thaw pipes, to charge batteries, or to start any engine.
INSTALLATION – PRODUCT OPERATION
Only qualied personnel authorized by the manufacturer should perform the installation of the welding equipment.
During set up, the operator must ensure that the machine is unplugged. Connecting generators in a series or a parallel
circuit is forbidden.
HARDWARE DESCRIPTION
The 80P, 130P, 160P, 200P are Inverter technology based welding machines, portable, single phase, fan cooled, for
electrode welding (MMA) in direct current output(DC). These machines can weld all types of electrodes : rutile, basic/
low hydrogen (except 80P), stainless and cast iron. They’re protected to work with generators (230 V +- 15%).
POWER SUPPLY – STARTING UP
• This hardware is supplied wih a 16A plug, type CEE7/7 (Standard 13A UK plug in the United Kingdom). The machine
must be connected to a socket WITH earth 230V (50 – 60 Hz). The absorbed eective current (I1e) is displayed on the
machine, for optimal use. Check that the power supply and its protection (fuse and/or circuit breaker) are compatible
with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings. Prefer a 20A socket for the 130P, 25 A for the 160P and 32A for the 200P in intensive use. The
device must be positioned so that the socket is always accessible.
• Starting the 80P, 130P, 160P et 200P is done by positionning the switch on the desired current value (the sleep mode
corresponds to the « » value of the potentiometer).
CONNECTION ON A GENERATOR
The machine can work with generators as long as the auxiliary power matches these requirements :
- The voltage must be AC, always set as specied, and the peak voltage below 400V,
- The frequency must be between 50 and 60 Hz.
It is imperative to check these requirements as several generators generate high voltage peaks that can damage these
machines.
MMA WELDING (ELECTRODE)
CONNECTIONS AND RECOMMENDATIONS
• Connect the cables, electrode holder and earth clamp in the connectors,
• Respect the welding polarity and required current indicated on the electrodes boxes,
• Remove the electrode from the electrode holder when the machine is not in use.
• Your machine has 3 features exclusive to Inverters :
- Hot Start delivers initial overcurrent to facilitate easy arc striking.
- Arc Force adjusts the arc voltage to compensate for the arc length increasing/decreasing
- Anti-Sticking technology prevents your electrode sticking to the work piece
TIG WELDING WITH INERT GAS (TIG MODE DC)
These machines can weld DC TIG with scratch start .

Chat with your GYS GYSMI 130P manual using AI

Get instant AI answers from your GYS GYSMI 130P manual

Ask anything about the GYS GYSMI 130P. Answers come from this manual, with the pages they are based on.

GYSMI 130P Maintenance Schedule

Remind me when maintenance is due
Yearly
Perform annual maintenance check

Maintenance should only be carried out by a qualified person. Annual maintenance is recommended to ensure safety and proper function.

2-3 times per year
Clean internal dust from casing

Remove the casing 2 or 3 times a year to remove excess dust using a blower. Ensure power is disconnected and wait two minutes before opening.

Show in the manual (page 12)
During cleaning
Check electrical connections

While cleaning the interior, have a qualified person check the tightness of electrical connections using an insulated tool.

Show in the manual (page 12)
Regularly
Inspect power supply cable

Regularly check the condition of the power supply cable. If damaged, it must be replaced by the manufacturer or a qualified person.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend GYSMI 130P?

Yes No

Frequently Asked Questions

A

Yes, the machine can operate with generators as long as the auxiliary power meets specific requirements. The voltage must be alternating and set correctly with peak values below 400V, and the frequency should be between 50 and 60 Hz. Always verify these conditions to prevent damage from high voltage spikes.

Is this answer helpful?

A

The GYSMI 130P supports all common electrode types including rutile, stainless steel, cast iron, and basic low-hydrogen electrodes. It provides direct current output suitable for manual metal arc (MMA) welding applications.

Is this answer helpful?

A

No, this equipment is classified as Class A and is not intended for residential sites connected to public low-voltage networks. It may cause electromagnetic interference in homes. It is best suited for industrial or commercial environments.

Is this answer helpful?

A

If both indicators are on but no current flows, the thermal protection has likely triggered due to overheating. Wait for the cooling cycle to complete. If only the green light is on, check the earth clamp and electrode holder connections for faults.

Is this answer helpful?

A

The manufacturer provides a two-year warranty covering defects in workmanship and materials from the date of purchase. This covers parts and labor but excludes normal wear, transport damage, misuse, or environmental failures like rust and dust.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Includes a durable carrying case for safe transport and storage
  • Compatible with generator power sources up to 230V +/- 15%
  • Features Hot Start, Arc Force, and Anti-Sticking technologies
VS

Disadvantages

  • Class A EMC rating limits use in residential low-voltage areas
  • Requires annual professional maintenance for optimal safety
  • Not suitable for TIG welding without additional optional accessories
M: QW-35-FL

Product Specification

Power

4kW (230V)

Open Circuit Voltage

72V

Control Range

10-130A (WIG/MMA)

Electrodes

0.06-0.13in (MMA)

Protection Class

IP21

Dimensions

3.94x9.84x6.69in (HxDxW)

Weight

6.39lbs

M: QW-35-FL

Product Description

GYS GYSMI 130P Inverter Welding Machine with Case - Read, Download & Print Free

The GYS GYSMI 130P Inverter Welding Machine with Case represents a pinnacle of portable welding technology designed for professionals and serious enthusiasts who demand reliability in the field. Manufactured in France, this robust unit combines advanced inverter technology with a compact design that fits perfectly into its included carrying case. It is engineered to handle a wide variety of electrode types, including rutile, stainless steel, cast iron, and basic electrodes, making it a versatile tool for diverse repair and fabrication tasks.

This machine operates on standard single-phase 230V power but includes specific protections that allow it to function effectively with generators, provided the voltage peaks remain under 400V. The unit features three specialized inverter functions: Hot Start, which delivers an initial surge of current to ensure easy arc ignition; Arc Force, which automatically adjusts voltage to prevent the electrode from sticking when the arc length changes; and Anti-Sticking technology, which safely breaks the circuit if the electrode adheres to the workpiece. These features significantly improve weld quality and ease of use.

Safety is paramount in the design of the GYSMI 130P. The machine meets Class A electromagnetic compatibility standards, meaning it is intended for industrial or commercial environments rather than residential areas where sensitive electronics might be affected by interference. Users must adhere to strict safety protocols regarding ventilation, personal protective equipment, and electrical grounding. The device includes thermal protection that shuts down the unit if overheating occurs, requiring a cool-down period before resuming work. Regular maintenance involves cleaning dust from the interior and checking cable integrity, ensuring long-term durability.

Whether you are working on construction sites, in workshops, or traveling for freelance projects, the inclusion of a dedicated case ensures your investment remains protected during transit. The clear interface allows for precise current adjustment via a simple potentiometer, while the IP21 rating offers basic protection against solid objects and vertical water drops. This comprehensive package makes the GYSMI 130P a reliable choice for high-quality MMA welding operations.

M: QW-35-FL

© Copyright 2026 Manual.ly